Your cart is empty.
Your cart is empty.Musiclily 2+2 Vintage Open Geared Bass Tuners Machine Head Tuning Keys Pegs Set for Jazz Precision P Bass Replacement, Chrome.
Steve Holladay
August 24, 2025
These hit at a heavier place than their price point. Great tuners for my home made basses.
Britt
August 20, 2025
The stock tuning machine on my TMB100 D string broke after 2.5 months. These fit suspiciously well. It took 5 minutes to remove the broken tuner and screw this into its spot. You can hardly tell the difference with the stock tuners. I reused the screws from the original, so I can’t comment on the quality of those.
Cullen Graham
July 29, 2025
If you are replacing Fender tuners, or making a clone, they are perfect. Just know I bought them to try on a Michael Kelly bass, which has a beautiful head stock oriented 2+2 ... and these made the headstock SO WIDE it was crazy looking, and would no longer fit inside the neck of the case. They seem well made, could use some proper lubing, and probably work well, But they were too big for my likes. I removed them.
Richard Steele
June 25, 2025
I bought these tuners to replace a malfunctioning tuner on my Epiphone bass guitar. It was hard to find any tuners that fit the 2 + 2 pattern on my bass. I found this set and, while they look closest to the tuners I wanted to replace, the holes did not line up. I had to drill new holes for the tuners to fit. Otherwise, the tuners work fine so far. We shall see how much mileage I get out of them.
bassmanbob
May 31, 2025
Great for the price, great radius in its tuning. I'm satisfied
Miguel
May 23, 2025
The measures are not 100% exacts. So I had to drill new holes and fill the old ones; nothing too hard, but anyway, over all, they're great.
Scott Mackintosh
April 20, 2025
Holes do not line up for Squier CV 70's Precision Bass.
HonkyTonk Hero
March 23, 2025
Good economical product. Stamped steel keys, not cast, but they work fine for my use. I have had no problem with string slippage on steel strings.
Seb
March 7, 2025
Livraison rapide et bien emballé. Dans un belle écrin, bien protégé.Mais pas encore installé, car j'attends le manche de ma basse.
石å·ã€€å‰›
March 6, 2025
サイズãŒã€å°ã•ã‚ã§ã€5弦ペグã®äº¤æ›ã«ä½¿ã„ã¾ã—ãŸã€‚ドリルã§ã€ç©´é–‹ã‘ãŒå¿…è¦ã§ã—ãŸãŒã€è‰¯ã‹ã£ãŸã§ã™ã€‚ã‚ã‚ŠãŒã¨ã†ã”ã–ã„ã¾ã—ãŸã€‚
Anthony
February 18, 2025
Li ho sostituiti su di una chitarra basso EKO modello EB29. Erano uguali, anche se con una leggera differenza della corrispondenza dei fori della placchetta, solo di un paio di millimetri, ma che comunque danno la possibilità di essere sostituiti con un poco di attenzione e impegno. Non perdete tempo a cercarli altrove, in quanto più cari e imprecisi nelle corrispondenze, Contattata la EKO Guitars, hanno risposto che non hanno più i ricambi. Il costo degli stessi in negozio, è nettamente superiore. Grazie a questa inserzione ho potuto risolvere perfettamente il problema. Puntualissimi e veloci nella consegna.
AAA CARE AUTO
December 28, 2024
great bang for the buck, stay in tune well, may have to drill holes but the price says it all.
JOSE BERNAL
November 18, 2024
Me gusto mucho el material pero en mi caso para el Bajo Ephipone SG le quedaron un poco chicas entonces no queda muy bien , pero a la descripción del producto esta bien, se siente buen material para el costo y si funcionan
Recommended Products
$19.81
$ 8 .99 $8.99