Your cart is empty.
Your cart is empty.Product Description
imanamvet66
September 5, 2025
Mounted beautifully. I YouTubed how and what and was very easy on my Blueridge BR-140 brand new. The original is kinda ugly in my opinion. No bubble, nice and professional looking, seriously. Awesome I have no problem buying again if I ever need to. NOT to thin like some have said it is thinner than the original that came on the Blueridge but just opens up the tone like it is supposed to.
Kimba
August 19, 2025
I used this to replace a scratched up and plain black pick guard on my wasburn Lyon full size acoustic.I noticed many reviews said this was cheap and thin, but it's the same thickness as the one I removed. And it looks fantastic.I removed the old one by carefully pealing it up, then used goo off and a guitar pick to scrape off the glue. I lined this up, out some masking tape down to show the positioning, the carefully laid it.The circle size matched the center abalone ring around my sound hole. Sure, I wish I didn't cover the abalone, but no big deal. Exactly where it goes will vary from guitar to guitar.When done I peaked off the protective coating. Easy peazy.You can see a tiny bit of the lighter color of the body as this isn't. Perfect fit, but it's an old guitar so good enough. I'm super happy!
Randy Candler
July 18, 2025
Was looking for a pickguard to install on a PRS Angelus. Checked out several different ones, but none measured exactly to the decorative trim around sound hole. Purchased this one and trimmed a little on the inside radius to match the trim (used a paint can as a template), then lightly sanded the edge where I trimmed it. Fit perfect and matches the black headstock! When installing get it where you want it, apply a couple of pieces of blue painters tape, fold it over, remove the backing, then fold it back in place. This way you don't risk it sticking where it's not wanted.
Don
July 13, 2025
Martin style ? I had to do a lot of cutting to get it to fit. It would be good for you to explain.that there is a clear plastic layer on the top that should be peeled off when finished putting it on.
Robert Hill
July 12, 2025
adhesive was uneven and had drips of adhesive that showed as raised spots when applied to the guitar, not sure if its just a one off error or if they are all like that. I do appreciate them listing the radius though, at least it fits even if it doesn't look good
Zigeuner
July 1, 2025
This is a good replacement pickguard especially for a Martin dreadnaught or similar-sized guitar. It's very thin at .020/.5mm so that there is no effect on the guitar's tone. It's got good adhesive on the underside and a thin peel-off protective sheet on the top. It is slightly oversized, hardly enough to notice at approximately 1/16" all around, except on the curve where the pickguard meets the sound hole rosette. I'm very pleased with the faux tortoise design and features mentioned. The price is right as well. You can't go wrong.
Jeremy
June 26, 2025
Perfect for my Dag-1 guitar. I bought this guitar just meat and potatoes so I can use nothing but the body and replace everything on it with what I like to truly make it mine. This pick guard not only looks really great its also a really well made guard. Its not to thick to give the guitar that off look, the colors are a real eye catcher and the back of the guard is extremely strong with the tape hold! So many guitar owners I know that seen the guard have asked where I purchased it so they can get one for themselves. A+
Studer
June 7, 2025
It’s thin but a good value for what you pay for it. If you’re putting a new guard on a high end guitar, I’d buy a replacement from the manufacturer. Had to do a little trimming to fit around the rosette I put on.
Leonel Antonio Hernandez Mondragon
May 24, 2025
la verdad que le ha dado un toque muy especial a la guitarra, además de proteger esa parte tan delicada, y el estilo del golpeador es muy bonito, compré 2 y solo he utilizado uno porque el adhesivo que lleva se adhiere bien y no se ha despegado en ningún momento.
Bernard K Jasper
April 24, 2025
Nice quality, not too thick and being self adhesive, is easy to apply.
paul
April 19, 2025
I had a plain black pickguard on my acoustic..I put this one on, and my guitar looks alot better..I like the look for sure
CASTEL YVES
February 12, 2025
Mis sur une guitare lag protèges bien adhésif 3m peut être repositionné...
ã“ã†ã‹ã‚“ã©NO1
January 29, 2025
事å‰ã«ã‚µã‚¤ã‚ºã‚’調ã¹ã€æ„›ç”¨ã®ã‚¢ã‚³ã‚®(ヤイリ)ã«ã‚¸ãƒ£ã‚¹ãƒˆã™ã‚‹ã‹ã¨æ³¨æ–‡ã€‚実際ã«ã¯ã€ã‚„ã¯ã‚Šå°‘ã—åˆã„ã¾ã›ã‚“ã§ã—ãŸãŒã€æ¦‚ãフィットã—ã¾ã—ãŸã€‚両é¢ãƒ†ãƒ¼ãƒ—付ãã§ã‚³ã‚¹ãƒ‘ã¯ç´ 晴らã—ã„ï¼
Recommended Products