Just received today and used to mount iPhone on tripod for a MantisX laser dry fire target setup. Components are made from well made metal parts (may be aluminum but metal seems to have more heft to it). Holds iPhone very solidly with no play or movement (lever locks phone in place with spring loaded rubber padded metal arms very securely). Also, base has two different size threaded attachment points to fit retaining screws of various size which makes it versatile for tripod attachments with the two most common standard retaining screw thread sizes. Tilt knob also holds position of the retaining arms very nicely, again with no play or movement once tightened. Overall very pleased with construction and utility of this item (IMHO well worth the extra $ compared to less expensive plastic tripod adapters). Overall 5 stars for quality and value.

This phone holder quality surprised me. It was much welcomed. It’s really well designed, feels solid. It’s a high quality part, very easy to use - has weight to it, the unit when you turn, has precession, you can feel each turn click into place - the turrets that tighten the swivel is soft but holds in place firmly. Everything is good to the touch and feel. It fits well with my phone when attached to a CamCaddie - I don’t feel like it will slip off once tighten down. Feel confident with the material and design. You can use this in many different applications. The 2 hot shoes is amazing add on. This is a keeper.

NEWER continues to manufacture quality photo related equipment, so I was expecting this to be good. Instead, it’s even better than I imagined. Holds the phone securely, quickly attaches to any arca headed tripod, adjusts quickly and easily, and looks good, too. I couldn’t have hoped for more.A+ little accessory!

This is a great mount! Price to quality is great. It works exactly as described. Strong tension to hold even large heavy phones like the latest Samsung Note. The body is light yet strong. Each pivot point feel secure when tightened fully.

NEEWER Smartphone Tripod Mount Aluminum Alloy, 360° Rotatable Phone Holder with Cold Shoe Mount and Arca Type Base Compatible with ... 2.6”–4” Wide SmartphonesASIN B0BLBZHMXWSold by XingBoom, shipped by AmazonI really like most aspects of this smartphone mount, so I don't want to write a negative review. However, there is an important aspect that I hope will be improved.The effective jaw depth is only 0.5 inch (~1.27 cm), from the top of the rubbery clamp pad down to the rubber pad on the base of the clamp. The thickness of the Otterbox case for my Pixel 5a 5G also is 0.5 inch, at the only practical area on the case that avoids the phone's side buttons and lenses. The top of the case is slightly beveled, reducing its effective thickness; therefore, the mount can be used.Unfortunately, there is not enough safety margin. If the phone is clamped with a reasonable amount of force, so the phone won't be crushed, it is not difficult to twist the phone out of the clamp. If the phone is bumped a few times, it could fall out of the clamp. Without the Otterbox case, my phone sits farther down in the clamp, where my phone is held securely and without much freedom to wiggle -- but of course, I want my phone to remain in its case.I think the height of the jaws and jaw pads should be increased by at least 0.1 inch (0.25 cm). Maybe the clamp width could be increased from 1 inch to 1.25 inches (2.5 to 3.2 cm). The jaw pads should have higher friction, and the pad width should cover the entire jaw width, to prevent the phone from working out of the clamp jaws. The corners of the jaw pads should be more rectangular than round, to maximize the contact area and resistance to bumping. The rubber pad on the base should extend farther along the base. Maybe the design goal was to advertise a maximum phone width of 4.0 inches, but I think that is much less important than extra security. (I am thinking about how to add an aluminum lip above each jaw; I just need a precision drill press and a tap ...)One side of the pivot (knuckle) that holds the folding foot extension is slightly too close to the bottom of the foot. This isn't a problem when using the folding foot for increased stability without a tripod. I don't know if there could be a minor problem when using an Arca-type clamp. There is no perceptible play (slop) in the pivot, which is good.Except as mentioned above, the Neewer mount is excellent, well made, sturdy, versatile, and attractive. There is a 1/4" threaded hole in the head of the clamp screw, and a cold shoe and 1/4" threaded hole in the Arca-type end of the clamp.(The Ulanzi ST-14 appears to have the same effective jaw height as the Neewer, but slightly wider rubber jaw pads. The Ulanzi has no 1/4" threaded hole in the clamp screw, and I see no indication that the Arca-type end of the clamp includes any 1/4" threaded hole.)

THIS is THE phone tripod mount that I've been looking for. Solid construction, great design, and easy to use.This thing feels and operates like it should cost double. I've used various NEEWER products in the past. Typically very budget-friendly costs with acceptable quality. This product however, raises the bar on their ability to provide great products at a reasonable cost.

The media could not be loaded.

This Neewer phone mount is a step up from my old one in almost every way. It has cold shoe slots on both sides so it doesnt matter which way you rotate your phone, a Quick Release Arca base on on the bottom if you use that standard, and it can tilt up and down which is very useful. Sometimes I am attaching this to a lightweight stand instead of a tripod, so having the tilt is very useful.My other phone mount has a smaller rotation lock and clamp lock, which leaves room for mounting points on the rear as well as the bottom which could definitely be useful, but I've never needed to use those instead of the bottom screw holes.I do camera work for a living and dont use my phone often for it, but a phone mount like this is very useful to me when filming something quick on the go outside of work. Having something like this allows me to use my already owned camera gear and attach it to my phone instead of a big heavy camera. Just being able to add a top handle makes getting low shots of your pet or kids much easier.My Dad has also used this mount on a short selfie stick to improve the ergonomics of filming himself when traveling and much preferred that to holding the phone out in his hand.

Me sorprendió la calidad del material y funcionalidad, es muy resistente, fácil de ajustar y muy estable. Se ajusta a cualquier tripié y celular 📱 Da mucha confianza usarlo. Vale cada peso invertido 💰

I wanted a rig that would attach to my telescope, this is perfect solution. Sturdy, well made and performed well with my iPhone 14 Pro Max mounted on my 10 inch Dobsonian.

Lo uso ormai da qualche mese e non segnalo particolari difetti. Buona ingegnerizzazione e costruzione. Perfetto per chi deve usarlo su un cavalletto per fare un uso più professionale del proprio smartphone. Calza tranquillamente prodotti da 5” in su (io lo uso per un IPhone pro max). Occhio: l’oggetto è totalmente in alluminio e può soffrire solo nelle parti in cui sono presenti filettature se si forza troppo (ma questa è una caratteristica di tutti i prodotti in alluminio). Lo consiglio!

Die Abbildung zeigt eine Montage auf einem Kugelkopf mit Flächenleuchte. Im Hochformat kann zusätzlich ein Mikrofon oder -Empfänger angeschlossen werden.Ich verwende die Smartphone-Halterung für Fotos, Videos und Videokonferenzen.+ Montage von Smartphone und Zubehör auf Stativ mit wahlweise 2 Gewindegrößen oder Arca-Anschluss,+ Werkzeuglose, sichere Fixierung mit Rändel- und Knebelschrauben,+ einfache, selbsterklärende Bedienung,+ solide, präzise Herstellung.- Es wird zusätzlich ein Stativ gebraucht (habe ich sowieso),- Eventuell wird für das Smartphone ein Bluetooth Fernauslöser gebraucht (habe ich sowieso).Für mich also perfekt.