Your cart is empty.
Your cart is empty. CG Intake Manifold:
Inner Diameter Metal Side: 19mm
Rubber Side: 33mm
Mounting Holes: 40mm(Bolt to Bolt)
Fitment:
Motorcycle Motorcross Dirt Bike CG
Package Included:
1 set intake manifold
Have any questions about our products you can contact us and we will help you out.
Earl
2025-08-28 18:00:51
Likes:Hawk 250 runs great. Quick delivery, easy to connect, easy to change jets.Dislikes:Did not fit Hawk 250 at first. The manifold mounting on the intake port has bolts for installing stock carb, bolts which block installation of the mounting boot. Choke is hard to reach because ends up in inside.
karen berry
2025-08-05 11:01:06
This adapter has molded and cast bosses so the adapter, carburetor, and hose all lock together making an "put it on and forget it" kit. Spend the extra five bucks, it is so worth it to be able to pull on choke without losing your carburetor. Seriously, five to ten bucks can be the difference between loving and hating your scooter!
Tyler Focht
2025-06-12 10:07:47
not the best material. will need holes wider (inwards) to fit on my predator 212/224 as well with the gasket. very nice rubber piece and clamps are good. fits my PWK 30 great
@MikeNBikes
2025-05-15 14:42:01
This isn't worth it.There are a few issues with the adapter. The first is the adapter itself, and then the hardware.1. The hardware is too short, the reason it's countersunk Phillips is because of the adapter itself (remember this) if you were to attach this to the PE17 or PE19 and use the hardware, there isn't enough length to secure it with x2 M6 nuts.2. The adapter itself is way too short (where the nub is for the hose to grip around) Even if you could slide the hose all the way down it, it's still too short. This is because when you use the hose clamp to secure the hose, the hardware that mounts the adapter to the carb (assuming you use M6 countersunk) is 3mm above the surface. The hose clamp can't go down any further due to the hardware, so you end up with the hose gripping the adapter MAYBE 3mm. Big surprise, I got vacuum leaks from it.The concept of it sounds nice to have a way to turn a flange-style carb into one that accepts a hose, however the design is seriously flawed. The flaws being 1) The nub is way too short for the hose to grip a sufficient mount of it to seal and 2) The hardware is very short.Don't bother. Don't waste the money.
Chris
2025-04-23 11:18:04
Manifold works as expected however the material and finish feels poor and could be improved easily
Zac Nearanz
2025-04-14 14:03:12
Nibbi hooked it up with this one, exactly what ya need silicone and adapter wise to get things to line up on their 22mm carb.
Maryellen & Angelo
2025-03-11 15:24:42
Bought this to mount the Nibbi 26mm carb to my TaoTao DB-17 pit bike, fits perfect, port matched for the existing intake. Crisp flow, no restrictions. If you are unsure because of all of the videos saying you need to countersink the bolts for it to work.. you don’t. Flip the bolts around to where the nuts are facing the front of the bike, plenty of room for the hose clamp and is far enough on the manifold.
ZW
2025-03-08 16:29:51
Ended up cutting my stock intake manifold and using the Nibbi silicone coupler, the adapter bolted to the manifold made the carb stick too far out.
Porcheron S.
2024-12-16 13:59:24
Fit perfectly
Maxime perreault
2024-12-05 15:40:06
Very low quality material i dont trust it . And dont want any pieces in the intake so im gonna make it by myself
Recommended Products
