Your cart is empty.
Your cart is empty.Product Description
Nilight 16Inch 11 LED Trailer Light Bar
Fits on any wide or narrow overland vehicle like truck, trailer and more. Made of durable Polycarbonate lens, sonically welded, completely sealed, quality led chips for super brightness for brake/stop light and tail light.
- Dimension: 15.6" x 1.3" x 0.5"
- Light Color: Red
- Working Voltage: 12V DC
- Material: PC lens and housing
Switch two brightenss levels, used as multiple functions.
Key Features
Screws Mount
Come with necessary self-tapping screws. Find the suitable hole position, then tighten the screws on both sides to complete the installation.
Highly Waterproof Design
Decently sealed and carefully add on glue at back wire without affecting the surface mounting of the light.
With upgraded 5050 LEDs and PC materials, make the lights to work longer.
For most 12V vehicles like heavy duty trucks, pickups, trailer, RV, SUV etc.
jay hawkins
2025-09-03 09:40:38
replaced trailer lights. Works Great! EZ to install.
Old Rider
2025-08-29 09:20:41
Purchased for a trailer I was building. For the price these are what I ordered and they have a narrow sleek look. Easy to mount and install (measure 3 times drill once). Good quality and are sealed well. I actually sprayed with water hose before installing, to insure they wouldn't collect water. They are not the brightest lights on the market, but you can see brake and turn signal over the running/ park lights. The brightest LEDs are in your typical style trailer light and I wanted something different on this build. I would purchase again.
Joe R. Downs Jr.
2025-08-23 09:05:34
Used on a trailer. On the ramp rails. Wanted more brake light warning and turn signal than just a single LED fixture at the fender level. And these are bright! If they keep me from being run over from behind just once they have more than paid for themselves. I like the turn signal/brake light feature along with the running light ability. After using for a while I will update usage and durability. Since these won't be dunked under the water on a boat trailer, I imagine they will remain waterproof till they burn out. Perfect size width wise for the rails on the ramp of the trailer and easy to install. Longer wires would be nice, but the supplier can't know everyone's emplacement. No problem to splice on the length needed as they give you at least a twelve inch lead on each wire from the light.
MC
2025-08-12 15:32:56
These were only an inch shorter than the original, fit fairly well. Bright brake, turn and running. Poor screws (the usual junk), the real problem was where the wires exited out the center back. There is a plastic stud? that protects the wires from the metal frame. The stud is slightly larger than 1/2 inch, so I had to enlarge the trailer wire hole. I was able to use a 1/2 drill bit and wobble the opening. Why the protective stud is so large is beyond me, the wire diameter was small.
RedRanger
2025-04-22 16:53:31
I wired up these lights parallel and with a three flash stop light module on the bench using a power supply.They are bright, perfect for brake lighting, and respond instantly, no delay.Once installed on the truck I will post ease of install, wiring, and if they are waterproof.So far... good light !-----18 month review - Still working and still bright, full LED Display still active.These worked out better than expected.Yes I would buy another set... if still available.Install was easy, hardest part was deciding where and finding the brake light wire. I was replacing my taillights too so everything was apart and made it easier. Find the brake light wire, splice in these lights, run the wire in series makes it easier.Easy mounting, easy wiring , work great !
Steve
2025-04-19 11:48:43
The OEM brake lights were just not cutting the mustard anymore. This was recommended by a colleague as he used them. There's no instruction included so the wiring is Red - Brakes, Black - Parking, White - Ground. Very bright, easy to install.
Truth and nothing but ...
2025-04-07 21:35:15
The media could not be loaded.
Andrew Prevost
2025-03-07 18:56:40
Lights worked and were bright but the durability of the lights weren't the best. They ended up cracking very easily. But I did also have them in a spot they probably weren't intended for so fault could be mine Lights were bright and nice until they did crack and break unfortunately.
Rejean Pichette
2025-03-04 21:20:34
Très satisfait, reçu exactement ce que j’ai commander ðŸ‘ðŸ‘
scott
2025-02-19 12:45:34
Nice and bright. When in the sunlight hard to tell between marker light/brake light
juan alvarez
2025-02-05 20:37:32
me decidi por estas barras en lugar de la tira completa flexible porque estas son de material mas duro y resistente, rigidas y macizas.. tienen mejor brillo que las luces originales del coche por la noche.
Juan A.
2025-01-24 15:33:34
Se mira buena la calidad del plastico y la iluminación es muy buena. Tienen casi una año. Y el plástico de la Mica sigue igual no la ha dañado el sol. Si la recomiendo
bcook
2025-01-20 18:57:48
Lights are well made and work well. They are more than adequate for my use. Install on a "motortote" motorcycle carrier. They needed to be installed with a beacket due to the protrusion at the back (9/16" dia ). For the miney they are a good value. I would highly recommend them when the profile is warranted.
Recommended Products