Your cart is empty.
Your cart is empty.Product Description
Product Structure
- LED Power: 30W(6 x 5W/pcs High-Intensity LEDs), Beam Pattern:Spot, Lumen:3600LM
- Material:6063 Aluminum Profile,High quality Led Chips, PC Lens.
- LED Color Temperature:Pure White 6000K-6500K.
- Input Voltage: 9-30V DC (fits 12V 24V vehicles) ,Lifespan: Over 50, 000 hours,Certifications: CE, FCC, RoHS
Upgrade 3D Projectors Lens
3D projectors with advanced LED chips, more wide soft light beam and further irradiation distance
-
-
Wide illumination range
-
Large heat fans have enough space to cool. High-quality thermal grease was used to extend lifespan.
-
3D projectors with advanced LED chips, wide soft light beams, and further irradiation distance.
-
Reasonable design makes the lights get fixed firmly to resist shock and other vibration conditions.
Strictly Test
Temperature & Humidity Test
To ensure that the unit can withstand a wide range of temperature without reduce light output safety.
Dust Test
To ensure the unit is preperly sealed against harmfull road dust and debris.
Salt Spray Test
To ensure that the unit can withstand against oxidation caused by salt on the coastal area and from winter condition.
Moisture Test
To ensure that the unit do not cause moisture buildup leading to reduce visibility.
Upgrade the light save your way in the darkness, rain, and foggy weather
- Off-Road Vehicles: sand rail, buggy, ATV, SUV, truck, train, motorbike, bus, tank, etc.
- Engineering Vehicles: excavator, Dozer, road roller, Tractor, Harvester, Grain Drill, Mower, Snowplow, bulldozer, crane, forklift, etc.
- Others: boat, fishing, courtyard lamp, yacht, road/ street lamp, etc.
PENGUINS
2025-08-28 19:18:04
This is my second purchase I had purchased about 5 years ago and it's been through floods and off road only one side has gone bad. This item is nice and bright which helps seeing the curb at nite
kpdrumswritessings
2025-08-03 17:33:58
So for those who quick skim- Lights are plenty bright, and aimed correctly they don't blind oncoming traffic, and can be used full time to aid your regular headlights. I did get interference noise on my radio but using some cheap ferrite beads clamped to the harness solves that.more detailed- I have an early 2000s Grand am- and the regular headlights are mediocre to say the least. there are forums about it online actually. The stock headlights are fine in urban places with streetlights and light pollution but out on rural roads and highways no.Even with high priced LED bulbs and constant adjustment the stock headlight setup has a weird pattern and leaves large swaths of darkness right in the center of your vision.I bought these headlights hoping to fill that space ( originally I was going to use one larger bar in the middle but this seemed like a better option). I mounted them in the grill below the bumper and aimed them almost square and straight ahead.- They filled in all of the dark areas and projected nicely down the road without really any bleeding into oncoming lanes- it is now like having regular good headlights- I can run better with these lights alone than I can with the stock ones alone.There was interference with the radio, but I clipped a few cheap (really under a buck each) ferrite bead noise suppressors on the harnesses in the right places and it cleared that up. I'd also recommend making sure that the light housing is grounded to the chassis as this may help (mine are mounted to the ABS bumper underframe,not metal). It also helped just buying the Nilight harness for 12$, it has a switch all the wiring and a relay. you can do it all yourself, but the cost of a rocker switch and the wire and crimps alone would cost as much as the whole harness.I feel better at night in this car now.
Matthew wheeler
2025-07-12 13:34:10
NiLight 7" white light bar spot light is perfect for dirt bike head lights better and further view then expected.
Bret Smith
2025-06-15 12:14:22
Perfect amount of light, not blinding everyone yet rocks and deer get lit up well!
Worldy experienced.
2025-06-06 19:46:52
I recently installed these lights to work along with my headlights when I turn on my highbeams.Wow.I'm pleasantly surprised.I had been using a set of 18 watt spot lights that where not doing what I needed them to do.Although installing these 60 watt lights required the installation of a dedicated circuit with fuse/relay, it is so worth the extra cost.These lights output an incredible amount of light while taking up very little space. Driving home from work at 3am with deer standing along the road EVERY night...Has become alot easier.
Michael R. Stiteler
2025-06-04 11:38:15
Mounted on my YZ250. Virtually all aftermarket stators for these bikes are 30-35 watts (max), so these lights (which use 30 Watts each) are perfect for aftermarket add ons to MX bikes. This light was $15 each for my two bikes. Wires have spade connectors on them already. I bought an inexpensive wiring harness from the same company and cut it all up to fit my application. Here are all the parts I used, with pricing. For my second bike I am just using a battery and the second light.In the photos, you can see how I mounted it using my bar mount screws. Note that I had to contour the bar stock around the bolt holes, since the top of the bar mount clamps was only flat near the holes. Just used a piece of aluminum stock as the base, drilled two pairs of holes in it, and used the included light mounts and screws with lots of Loctite. As shown in the photos, pretty bright light and very nice looking installation.
Bill 21244
2025-05-20 17:21:08
very satisfied with product
Calvin
2025-05-12 11:31:10
Thanks
Isidro cruz
2025-04-29 18:59:59
Alumbran perfecto cómo me imaginé sin usar los faros normales para ciudad es perfectoNo quiero imaginar en carreteras sin duda alguna fue la mejor elección..Calidad y en precio es bajo costoFalta ver la durabilidad en tiempo de lluvias
WackoTaco77
2025-04-26 11:23:52
Arrived earlier than expected and seem to be really good quality with all the required fittings, just need to fit them now but impressed so far.
RobStrk
2025-04-15 20:10:06
I installed these lights in approximately 2 hours with all wiring and connecting completed. They are suprisingly very bright, easy to adjust to redirect the lights, and hardware supplied is more than enough to properly positon them in a multitude of locations. I am more than happy with the price and quality of the product, making my reversing so much easier with more light.
Cliente de
2025-03-17 14:58:44
Alumbran demasiado , tanto que ya no uso los focos normales del auto, funcionan perfecto , sin queja , muy recomendado 30w por foco, muy buenos y nada caro
TS.521x
2024-12-30 10:37:16
Stealth looking, solid beam, does not draw too much power, easy to mount. No sign of rust or corrosion yet. I only needed one but you get stuck buying a pair.
Recommended Products