Your cart is empty.
Your cart is empty.Product Description
LOONGRIE Engine Motor Mounts bracket is made of high-quality rubber and metal materials, and has a strong technical team. All products can fully meet your car in terms of performance, assembly and appearance. Providing quality products has always been our goal. To ensure the part fits your vehicle, please use the FITMENT BAR function at the top of the listing and enter your full vehicle information
Compatible with Nissan Altima 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2.5L automatic transmission
- DEA: A4350
- OEM NO.: 11350-JA00A
- DEA: A4353
- OEM NO.: 11210-JA000
- DEA: A4339
- OEM NO.:11360-JA000
- DEA: A4340
- OEM NO.:11220-JA000
Brian P.
2025-09-05 11:21:13
Due to winter rust, I needed to replace two front mounts but ended up replacing all 4. They all fit nicely and seemed to be high quality. One tricky part was getting the transmission bracket seated onto the new mount that bolts to the transmission (front passenger side). In hindsight, I would recommend you remove the transmission mount from the car with the bracket still attached. There is just (barely) enough room for you to do this after removing the 3, 14mm bolts from the transmission (see pic) and the 3 bottom bolts from the mount. Then you can take the bracket off, see how it is seated, and put the new one on. I couldn’t even hammer the bracket on the new mount but was able to seat it after aligning it perfectly and then use an impact wrench to drive it on. If you look at the old bracket, the size is right and it’s supposed to be snug. With the bracket in place, you can then install it with just enough room back into your engine and align it with your transmission. Anyone who claims their engine still rattles after installing these parts, likely messed this part of the install up (i.e. didn’t seat the bracket correctly onto this mount) or has another problem entirely. My car is super quiet with all 4 new mounts installed. Also, I snapped one of my old posts off my old rusted mount and was unable to get the nut off. If your old mounts are really bad, you may want to order some high grade (10.9 or 8.8) M12 – 1.25mm flange nuts, which will fit the threads on most of these parts. M12 is easy to find but not with a 1.25mm/fine thread. I went to three hardware stores and couldn’t find one with the flange head like is used. Great set of replacement mounts at a phenomenal price! Install is a bit tricky but that’s not the product, rather my shade tree status!
gabriel b.
2025-08-26 20:35:16
Hasta hoy todo bien esperemos que dure muchas gracias
Jose morales
2025-08-18 12:19:26
Excelente
Mumy
2025-08-12 09:05:25
El producto no encajaba con los hilos q tenÃan el original
Lissette Ledesma
2025-08-05 15:07:22
Tengo corolla 2005 y funcionaron perfectos.
Michael Arambula
2025-08-03 14:34:12
These fit my 2012 Nissan Altima 2.5S perfectly. I had to replace my OEM engine mounts after 12 years. These were a great deal and I hope they last 12 years like my last ones.Update: these started to fail in January 2025. I just replaced them today 03/01/2025 with another brand. Two of the mounts went bad.
annemg32
2025-07-28 09:40:31
Easy to install.
Excelente producto, pega muy bien, recomendado
2025-07-23 12:30:12
Quedaron muy bien
hasan noori
2025-06-21 18:54:01
IT IS FITS VERY WELL. GEAR MOUNTING 3STAR.
Essam el Araby
2025-02-02 13:40:13
جودة غير مقبولة بعد التركيب يوجد اهتزاز بالماتور بسبب سوء جودة الكاوتش الداخلي للمنتج Ùˆ سوء التصميم لم يقضي على الاهتزاز بالكامل بل يوجد اهتزاز Ø®Ùي٠يسبب ازعاج للسائق
Recommended Products