Your cart is empty.
Your cart is empty.Finish:White Outlet Adapter For use with one or two-circuit track Allows a power outlet on the track
Julian
August 28, 2025
Have an H Type track, and this works just as I thought. Took under 3 seconds to install the thing, and I tested it out and it seems to work great! Using this to plug a motorized projector into so I don't have to run the cable all the way across my ceiling and down the wall.Will keep you posted if there's any trouble with the power needed from the projector but I foresee no issues!
James R.
August 16, 2025
I purchased it to create an outlet for Christmas lights near a high window without any outlets near it. It worked like a charm, no need to run long extension cords up the wall or adding hooks to hold it!
Stuster
June 23, 2025
The electrical contacts inside this are so poorly shaped, that a plug won't stay in.Plug something into it, and the plug just falls out.I was able to dissemble it, bend a bigger curve into the two contacts and re-assemble it, and I got it to function. Even then, the connection was suspect, so I used electrical tape to keep them together.I'm just using it to recharge some battery powered security cameras. So I only need a so-so connection for an hour a month to do what I need.Great idea. Needs to be better built though.
JD Clever
June 12, 2025
Needed a plug for the laptop in the kitchen on the island. Only power was above on the track lights. Plugged this in on the end and plugged the laptop into that. Works great. Only thing to remember is that power only flows to this plug if the switch is on for the track. So if you're needing constant power but want the track off for some reason - this isn't the right solution. For me, it does what i need - which is charge the laptop occasionally - and let me watch a youtube or cooking video while I'm in the kitchen. :)
The Black Forest Artisan
May 6, 2025
Loved the fact that this little goodie circumvented the urge to open drywall and install a light-duty plug-in (duplex outlet) near to the track lighting. This little device enabled the PIN SPOT (low voltage) in the center of the Resurrection Mural pictured, with the same light-duty power that enables UV bulbs around it, on track lighting.
A. Chang
March 21, 2025
It's sturdy and not difficult to take off or put on to an H Track. However, as others have stated, it is loose when plugging something in (feel free to open it and see if you can make adjustments, I opened it but wasn't confident enough to make changes). I put tape on the side to grip; it does hold well if you use a 3-prong plug.For anyone interested, I used a Nuvo extension wand and a mini-ball head with a cold shoe from Koolehaoda (but any will do). On the last picture, you can see I was using the power supply and it was messy, fortunately my portable projector also uses USB-C and using a 65w power adapter. I have a dimmable track, so I just put it at 5% to trigger enough electricity.
Just Me
December 1, 2024
The plugs worked well my husband had to do a few things to get them hooked up but overall was easy enough for somebody with a little bit of knowledge in this department. I was able to get rid of the ugly track lights and hang some of my large paper star lights so I am happy!
Charles
November 27, 2024
It would not keep cord plugged in. Very loose. Had to disassemble (not recommended) and repair it. After doing so it seems to work.
Shack
November 19, 2024
Took just about a month to receive. After contacting the said it was shipping services do to increased packages. Although i have purchased and received manynither products within 1.5 weeks of order.The item is as expected and works. If you need this item just give lits of time to recieve and it will be good.
Recommended Products
