Your cart is empty.
Your cart is empty.Product Description
Partition hangers let you hang cubicle accessories or wall files on cubicle wall. Hanger is made of metal. Each 7" long hanger adjusts from 1-1/4" to 3-1/2".
From the Manufacturer
Officemate Wall File Pockets
Wall-file pockets keep active files readily and easily available. Start with a single pocket and expand from there as necessary, or chose a three-, four-, or seven-pocket filing system to keep these important documents well organized and easily found. Officemate offers a wide variety of wall pockets--in black, smoke, or clear--for your filing needs. Grande Central system wall files can even serve as a small-office or home-mail-sorting system.
rosekiddo
2025-08-08 10:21:29
Works perfectly to hang anything in the office- diplomas, framed art, wood decor... It can be used with one hook or two, or even three per picture. I have hung items that weight up to 10 pounds with ease. The screws on the bottom straight end are used to grab the wire or hanging device on the back of your item. I have used this to hang wood decor that has indentations for hooks, framed art with glass that has a wire in the back, sawtooth hooks at the top, or the triangle shaped hooks that come on the back of cheaper frames. These hangers work perfectly with each type of item I used to decorate with. I HIGHLY recommend it- best price I could find, and they are GREAT quality!
Shaun L.
2025-07-19 14:04:01
We used these to mount my daughters mirror to her closet door. It worked great. We also used velcro command strips on the back to reinforce it just in case. I like that I didn’t have to screw anything into the door and that it closes all the way due to the slim designed brackets. As you can see from the photos, we can shut the door completely. Very pleased with it!
Eva
2025-07-14 12:20:54
They are holding up well. Searched for over a year, decided on these. Very happy!
Susan Seymour
2025-06-15 20:32:03
These hooks work very well to hang a small whiteboard from the top of a wide partition. The top of the small whiteboard is 5 1/2" from the top of the wall when hung in place. They are sturdy and easy to assemble and to adjust to fit the wider cubicle wall. Most other handing devices I looked at were made for too narrow a partition width.
N. K. Shumake
2025-05-30 14:33:27
These do NOT fit a cubicle wall over two inches, even though the dimensions say up to 3 1/2â€. Now I know why so many customers are returning them. They look sturdy, but I am returning them.
M. Floros
2025-05-17 16:29:07
For a few dollars these work great. They are sturdy cubicle hangers...I know because I drilled one. I have two knocks against them preventing them from getting a 5-star rating. First, it has an adjustment for how wide your cubicle wall is. The L-shaped part has slots in the long side and short side so you can adjust from 1.25" to 3.75" according to the product specifications. *But* there is about a 0.5" range of widths that you can't do. specifically if you have it assembled in the "narrow" orientation, the maximum width is about 2 3/16" and minimum width for the "wide" orientation is 2 11/16", so if your cubicle wall width happens to be in that half inch dead band, it will be loose. There is room that the slot could be made .5" longer so any wall width could be supported, but it would stick forward of the mounting arm face of the cubicle. I should have taken a picture to illustrate but didn't.The other thing is that there is only one screw hole at the very bottom to hang your item and what I wanted to hang would hit the desk if the top was ~6" below the cube wall where the screw is. I had to drill and tap (it's a #10x32 screw) a hole higher on the hanger to clear the desk. That was a satisfying little project but a 5-star item would have one or two more holes so you could adjust the height of the item you're hanging. It took a while to drill, though, so I verified it is decent metal.
Paul Lo Verme
2025-05-05 11:09:57
I have a heavy wooden plaque I wanted to hang in my cubicle and it fell and almost broke because I used those Command Strips by 3M. They say they will support the weight, but when in reality they do not. So I had to search for a solution. Low and behold, this was it. I assembled the hook, and mounted over the top of my cube wall, and the lower screw was adjusted out a bit, and I hung my plaque on the hanger, and BOOM!! Success. It looks good and does not mar the wall of the cube.
Customer
2025-04-27 10:46:59
Quick delivery. Easy to assemble. Stable and sturdy. Over been looking for this solution for almost a year.Hanging a well crammed painting in a cubicle, was difficult troll I found these. Now it feelsl a little more high end, even as we crossed on were we can. Thanks a lot, several people have already asked what I used to hang it so I sent them a link and assume they will be happily displaying their personality soon.
Chantal Reeves
2025-04-25 18:43:04
J'ai acheté ça pour y installer des cadres et je ne trouvais jamais de support adéquat. C'est juste parfait. Belle qualité et ça fonctionne de la façon que je voulais le faire. Très contente d'avoir trouvé ça. Il y a même une vis plus longue, c'est ce que j'ai utilisé pour installer mes cadres. Merci.
Kindle Customer
2025-02-09 11:52:56
It works fine for what I bought it for.You hang the thing up. You put stuff in it. You take it out. Life goes on.I was a bit upset that it arrived with a dent, could've done with more padding during shipping for the strength of the metal I suppose (pics related).
SR
2025-02-05 15:25:07
These aren't as strong as I was hoping, and I only got 3 of 4 screws.
Customer
2025-01-28 18:01:17
Ordered several of these most worked perfect but had a couple that the screws were too large for the hole drilled in them.
Lorraine
2025-01-15 18:40:06
These are great that they are adjustable width, but REALLY wish they were adjustable length as well. I had a handy employee cut and bend the long pieces so that it wouldn't hang down too far on lower cubicle walls. If they were adjustable both ways, and had some protective coating on the screws (so they don't scratch walls), I would have rated them a 5.
Recommended Products
