Your cart is empty.
Your cart is empty.Product Description
On stage EB9760 exterior speaker mounting bracket fits on 1 3/8 inch stand and mounts to any speaker cabinet. Mounting bracket is constructed from heavy-duty plastic and comes with mounting hardware. Features nylon tipped tightening screw for secure hold, 3/8 inch holes for flush mounting, and 3/8 x 1 1/2 inch slots for pre-drilled holes.
From the Manufacturer
New and improved non-slip tightening mechanism! Fits on 1 3/8" pole and mounts to any speaker cabinet without the need for a cutout. Includes hardware.
Chinchilla Wafers
2025-08-25 12:53:01
Works like it should. Made of plastic but it’s reasonably thick and sturdy.I used it to mount a projector on a speaker pole. If you’re interested in that, the contraption was made with parts of a Monoprice projector ceiling mount and a piece of 3/4†plywood, with 1/4†bolts holding the speaker bracket to the wood. I opted to “hang†the projector upside down, rather than pop it on top, because my, and most home/office projectors have lens shift, so they’re made to project from below the screen, or hanging upside down from the ceiling, rather than ideally from a height at the middle of the screen. The keystoning was less in this arrangement. Still, to use zero keystone the bottom of the screen had to be pretty low, even when the speaker pole is up as tall as it goes- 8ft. At some point I’d like to get a 10’ Speaker pole, they’re not the normal kind, but are out there. It’s a good arrangement- stable, and tall enough to get over people. I’ve seen people use ladders but this is less obtrusive (still obtrusive though) and more secure, easier to transport.
Debra Armstrong
2025-08-23 10:01:32
I love this product! It feels good and strong even though it’s plastic, it is a strong durable plastic. I hope long lasting I just bought it. You have lots of room for The twist knob to make adjustments it’s not tight like others. I was so excited I had my tripod ready, I put this item on top of the tripod and and I put my speaker box on top of this item and it stayed until I secured it with the 4 screws (that were included) the next day.Love, Love, LoveI highly Reccommend this product
Baldilockes
2025-07-09 10:45:51
I mounted it on a round tabletop so I could put it on an extra speaker tripod as a table. Purrfect. Strong
Fastelder
2025-06-29 18:34:24
I have a lot of experience with stands and speakers going back 30 years, so here goes: The stands are plastic, but seem brittle and light. I would use these where you intend to use them on an infrequent basis, mostly because I don't think they will take the abuse of a steady 2 gig a weekend set up. If you are looking for that, then I strongly suggest installing a socket mount into your cabinet. That said, I bought these for the larger footprint. I bought them to install an led light to them. If you use them for speakers, I wouldn't go much over a small box with a 10" or possibly a 12" driver. Anything over that and I again suggest a socket mount. Price was right for what I received.
Jim O.
2025-06-16 18:53:01
.
Benny Cruz
2025-05-21 13:12:25
Worked as advertised
Victor Wheeler
2025-05-05 12:04:29
This is an outstanding product! I purchased these brackets to be installed on a pair of Yamaha Stagepas 300 speakers that we use consistently at my workplace. They are durable, solid, and get the job the done when we need to elevate the speakers above the congregation.
Jer
2025-04-25 17:50:24
The last mount I had broke but it lasted forever. This is slightly different but still the same brand. Seems smaller so I'm not sure how well it will hold up, only time will tell. So far it's been very good though, but thanks to the pandemic the speaker it's on doesn't see as much action as it used to.
Pedro
2025-04-18 13:03:54
Compré dos y las usé para colocar mis monitores de estudio y quedaron perfectas.
gp
2025-04-06 10:32:45
I don't know why I didn't seek these out earlier. Adds a ton of functionality to PA stands. Perfect for projectors, racks, shelves & anything else you can think of that needs to be elevated. Super useful in a mobile environment & I'll be travelling with a pair of these anytime I bring out the stands.They feel solid when attached, the plastic seems very solid & you can easily screw items onto the plate or use zip ties or wire for some temporary or lightweight placement. Useful for a wide variety of AV environments as well as just around the house or any number of any gigs.
Sew What
2025-03-28 10:42:02
They fit and look sturdy. Great price.
JOHN JAIRO TORO OSORIO
2025-03-02 14:17:06
Buena
ricardo
2025-01-21 17:47:20
Excelente calidad para el precio!
Recommended Products
$59.00
$ 30 .99 $30.99