Your cart is empty.
Your cart is empty.Our RS7000 Tilt-Back Amp Stand features robust support arms that securely support an amp while angling the speaker upward to direct sound toward the listener while reducing floor reflections. Padding on the arms increases grip and protects the amp from blemishes. The heavy-duty frame keeps gear firmly in place off the floor and out of harm's way and its height adjusts to enable precise sound direction. For convenient, compact storage and travel, the stand breaks down into three pieces and lays flat.
Customer
2025-08-23 18:07:14
This on Stage brand is the best of the options of like stands. I sent two other brands back after I tried to put my heavy fender tube amp on them. Finally got the On Stage Brand works great, strudy and easy to set up in seconds. Highly recommended.
Steve Long
2025-07-30 12:42:55
Helpful to raise the guitar combo-amp higher so that the volume can be turned down and the guitar play can still hear themselves. Easy to assemble/adjust. I would recommend it.
Captain
2025-07-26 17:17:04
I bought this for use with a Fishman Artist, mainly looking for the height to project better in smaller venues. I saw another review that mentioned cutting the vertical supports, and I needed to do that to make this stand work with the Artist amp. The rear supports are tall enough to interfere with the power cord and rear connectors. I cut 3 3/4 In off of each vertical support and the results are perfect. The supports fit perfectly now.Overall the stand is solid, more than adequate for the weight, and stable. It would hold a much heavier cab with no problems. I really like to height, as it allows for the small form amp to project much better than it would on the floor. I also tried it with my Fishman Loudbox Mini amp, and it fits that amp very well. The feet fit just inside the bottom supports.
Poor Old Norm
2025-07-11 18:39:30
This stand is great. I've got a Fender G-DEC 3 30 Combo amp and need to be able to read the display and buttons and knobs in order to do everything this amp does. This stand allows me to bring the amp up to a level where everything can be seen, read, and adjusted. I'm no longer squatting in front of it while trying not to bang up my nice guitar while I find the right preset, adjust the current preset, change backing tracks, etc. I may buy a second one for friends to use when they come over to practice. I'm really happy with the purchase and how many options I have with height adjustments. It feels very stable even at the highest settings. I highly recommend this stand. I'd buy it again without hesitation. It's a nice feeling when you buy something on line and it lives up to ALL of your expectations because no one likes to admit that they made a mistake purchasing anything. I think before you make an equipment investment you make a sort of ego investment and it makes you reluctant to admit that you didn't really get such a good deal or you failed to read the fine print. You won't have to reluctantly admit you made a lame decision with this stand. It is a really well made piece and I'm confidant when I set my expensive and fragile tube amplifiers on it that it's going to be stable. You can't go wrong with this one.
Jim Usher
2025-07-10 10:46:04
Nice light duty amp stand. Decent quality for the price. That said there is a similar size stand available that is simpler and just a bit sturdier.
DenisR
2025-06-15 12:25:47
I use this stand with a "Fishman Loudbox Artist LBX-600" amplifier. The amp fits very well for both width and depth. The sides of the amp cabinet protrudes about 1 inch out in both the front and back and the stand's vertical support arms fits perfectly between the protrusions on the back of the amp cabinet providing additional support. But not all is perfect, the stand's vertical support arms are too long for this little amp. The support arms cover the power and the Channel 1 D.I. Out receptacles. This was easily fixed by carefully cutting off 3 3/4" lengths from each vertical support arm, now the amp fits perfectly.PROS:o This stand is rock solid and folds down to a very compact size.o I get a much nicer sound from the amp now that its off the floor.o It brings the amp's controls to a much more comfortable height.CONS:o I think the stand was made for bigger amps like the Fender Twin Reverb and not for the Fishman Artist.o I can't complain about having to modify the stand for my little amp, I like the way the amp sits on it and the amp likes it too.
Tom Chohany
2025-05-13 14:25:38
I like the amp stand and it is sturdy and well put together. If there was one design feature that is missing is the ability to adjust the tilt of the stand to reposition it and allow more personalized angle for use. The stand is rugged and sturdy and was extremely easy to assemble. It is a good value and highly recommend it.
HLM
2025-05-10 14:37:21
Stable and reliable.
Smiley
2025-04-30 15:25:10
Was looking for an amp stand for my Boss Katana 100, and this one caught my eye. I needed something that would offer clearances for the rear inputs, and be sturdy, and of course, make dialing in tone even better. Plus it had good reviews, even though I take them these days with a grain of salt. This stand has done that an much more, I was only looking at basic floor options, that will let the amp sit in a tilted fashion, but this at its lowest setting is well within arms reach while standing to tweak dials (if you're not using digital interfaces, and need to access the control panel), its easier to see, and while I have not set it to its highest position, it looks roughly about a foot higher, so midriff for me. It has a nice wide stance for stability, and I have confidence that it wont collapse. The price is pretty much on point if you compare with others in the same price range. I would buy more if I had the need.
Niclas
2025-04-20 14:00:19
Ich habe für meine Soundboks 2 einen Ständer gesucht, damit ich das Gerät nicht direkt im Matsch platzieren muss. Von den Maßen her passt dieser Ständer echt super, aber im Anbetracht des Materialwertes empfand ich den Preis als deutlich zu hoch. Darüber hinaus, ist das Ding so verpackt gewesen, dass bereits an beiden Stangen Kratzer waren. Hierfür gab es von Amazon eine kleine Erstattung, weshalb ich mich mangels Alternativen dazu entschieden habe, den Ständer zu behalten!
Emmanuel Joya
2025-04-03 16:44:24
Alta calidad en el producto, todo llego en tiempo y forma a Playa del Carmen Quintana Roo México. Lo recomiendo y volverÃa a comprar. DJ Emmanuel Joya lo recomienda al 100%
LE VOT JACQUES
2025-03-02 20:29:04
Très bon produit qui fait vraiment le job
rolben
2025-02-17 12:13:56
Very nice & strong Amp Stand. I like it.
Recommended Products
