Shopping Cart

Your cart is empty.

Your cart is empty.

OONO 16 Amp 2x12 Position Terminal Block Distribution Module for AC DC

4.7 (13) Write Review
Free shipping on orders over $29.99

$10.99

$ 5 .99 $5.99

In Stock

About this item

  • 16Amp 48V 2x12 position screw terminal block distribution module. Support for multiple module extension connections.
  • Rated current 16 Amp(total input or output), Maximum voltage 48V
  • A / B terminal blocks, Pitch 7.5mm/0.295", Wire range 26AWG ~ 12AWG / 2.5mm square. Rated current 16Amp. Strip length 7mm. Screws - M3,steel, Cr3+ Zn plated. Pin header and Cage - Brass.
  • A1~B6 / A7~B12 terminal blocks, Pitch 5.0mm/0.197", Wire range 26AWG ~ 12AWG / 2.5mm square. Rated current 16Amp. Strip length 7mm. Screws - M3,steel, Cr3+ Zn plated. Pin header and Cage - Brass.
  • UL CE CQC certified terminal blocks, FR-4 glass fiber PCB.


Product Description

OONO 16 Amp 2x12 Position Terminal Block Distribution Module for AC DC

  • 16Amp 48V 2x12 position screw terminal block distribution module. Support for multiple module extension connections.
  • Rated current 16 Amp(total input or output), Maximum voltage 48V.
  • A / B terminal blocks, Pitch 7.5mm/0.295", Wire range 26AWG ~ 12AWG / 2.5mm square. Rated current 16Amp. Strip length 7mm. Screws - M3,steel, Cr3+ Zn plated. Pin header and Cage - Brass.
  • A1~B6 / A7~B12 terminal blocks, Pitch 5.0mm/0.197", Wire range 26AWG ~ 12AWG / 2.5mm square. Rated current 16Amp. Strip length 7mm. Screws - M3,steel, Cr3+ Zn plated. Pin header and Cage - Brass.
1

Typical Connection Use Method:

2

Dimensions:

3

Schematic:

4

Gary H.
2025-08-22 18:23:37
I have LOTs of illuminated structures on my HO scale layout. Many use older incandescent miniature lights, some use newer LEDs in integrated resistors, and some tiny LEDs than cannot handle more than 3 VDC. I have many old power packs that I can use for accessory lightening and I run 16 VAC to a terminal block, 12 VDC to a terminal block and a 3 VDC battery pack to another terminal block. Simply run the desired lead to the power that it needs and screw the wires in. Easy, neat, and much less likely to use the wrong kind of power and burn out an LED. They are also useful wiring AC common to switches and anywhere else where multiple connections of a common voltage are needed. They just make wiring a little easier.
DL
2025-08-20 18:36:12
Used for my train set and made wiring much easier.
richie martinez
2025-08-08 17:48:29
I'm someone who hunts for the best value, no point in paying for extra if you don't. I've compared this with a 1-2 dollar cheaper version. Comes in a box over a anti static bag. The labeling is better and this sits lower (could be pro or con). PCB is nicely labeled throughout and solder joints are shiny (better solder used). While there is nothing wrong with the cheaper version, this version is worth the extra 2 bucks.
Thomas Owens
2025-05-03 17:07:43
Not easy to connect wires to this unit. Being Patient helps
Crazy Eyed Veteran
2025-04-27 11:50:21
Seems constructed really well. The downside is that the underside isn’t insulated and no pictures are of the underside. You will have to mount it using the insulators to raise it. I can’t use it for my project because of this.
Anthony Rohrbaugh
2025-04-16 17:28:10
Used it for a 12v low voltage light system. Worked perfect to brake out to 10 different lights. Small size makes it great to stash away in a little spot somewhere.
Robert Beadle
2025-04-10 21:40:31
Best feeder block for model railroaders around. Saw t on YouTube and just had to get some.
Customer
2025-04-06 17:59:39
Works well.
Michel Francoeur
2025-02-24 15:40:10
Fait bien le travail
Dirk Keller
2025-02-01 18:45:59
como describe
jpj
2025-01-18 16:03:17
The item was exactly as described in the ad. seems well made and is working fine.
Dwayne
2024-12-28 09:12:11
It came with mounting screws
Co Nguyen
2024-12-12 10:06:44
Received as advertised.