Your cart is empty.
Your cart is empty.Riser pipes in rigid PVC allow you to connect from a sprinkler line, typically under the ground, to a hose faucet, drip manifold, shrub head, spray head, impact sprinkler, or gear-drive rotor. The wall thickness of PVC risers is thicker than Schedule 40 pipe which means it has greater rigidity and pressure rating. As plants grow you can extend the riser above the plants via addition of a Schedule 40 PVC coupling and another riser. Use a support stake to stabilize taller risers. Riser inlet/outlet sizes for residential applications are 1/2-inch, 3/4-inch, and 1-inch male pipe thread (MPT), with lengths spanning from just the pipe threads (“close nipple”) to 48 inches. Compatible with irrigation components from Orbit, Hydro-Rain, and other major brands. For outdoor irrigation use with cold water only.
Katherine & Mick
2025-08-25 14:00:49
I bought this along with some double female connectors to create a 36 inch riser for a sprinkler that needed to be taller due to bushes growing. I bought three, twelve inch pipes plus a pack of the connectors to make this happen. I probably could have gone to the orange box store and got a single piece and one connector but this was fairly easy and I believe a better price or similar. The only difference is that I spliced three instead of getting one piece and technically there is a greater chance of a leak I suppose. With some teflon tape there is no leaks and it worked for my application. I am using this same review for the connectors as well and I can't remember which set came with teflon tape. Plastic appears of high quality. The connectors came with a bunch in the pack so I am good for future projects.
Jtrianta
2025-08-13 21:07:26
This item worked perfectly for extending the sprinklers. No leaks. Very easy to install.
ExNYer72
2025-07-31 14:59:36
Their hose attachments, risers and pipes are solid construction for my DIY lawn/garden and irrigation repairs. However, their watering gadgets like timers are not so good and never hold up for more than a year.
Ronny, Tina, and Ryan Garsee
2025-07-24 16:44:55
Works well.
WD
2025-07-09 16:00:22
FOR WHATEVER REASON 3/4 INCH RISERS ARE DIFFICULT TO FIND. THE 1/2 INCH RISERS ARE ABUNDANT, BUT IF YOU WANT TO RAISE A ROTARY LAWN IRRIGATION HEAD ---- YOU NEED THIS 3/4 INCH SIZE. GOOD PRICE AND READILY AVAILABLE ON AMAZON. WOULD RECOMMEND . . . . .
Carl Rice
2025-06-21 11:11:03
Made of quality materials and worked great and recommended.
ken845
2025-06-14 16:09:26
It’s a common irrigation type plastic pipe riser. Just in case you wonder, the inside diameter (ID) is 0.75 inches (3/4 inch), the outside diameter (OD) is about1.04 inches and the total length (end-to-end) is 8 inches. The treaded part (male pipe thread “MPTâ€) of each end of the pipe is 3/4 inch long, the smooth section of the pipe is 6 1/2 inches (8 minus 1.5). It has “schedule 80†thickness, which means it has greater rigidity and pressure rating. It’s thicker than Schedule 40 pipe. Use plumber’s white teflon tape (PTFE) when assembling for best results, no leaks. It’s easy to assemble by hand.
Dave J 4051
2025-04-04 19:32:41
Did the job to replace my broken sprinkler pipe! Completely satisfied with the quality and price.
LuckyLucy
2025-03-17 17:07:01
Is a decent product except the thread plastics are somewhat weak and soft I can actually bend the threads with my fingernails. I should have bought rainBird.
Daniel Rankin
2025-03-04 10:54:56
I only got 3 out of 5. Were the other two on back order?
Customer
2025-02-16 10:48:12
Got what I expected
Chef
2025-02-07 17:21:09
works
Spikd
2024-12-31 16:17:10
This item was as expected. Delivery to my home was a good bonus.
Recommended Products
