Your cart is empty.
Your cart is empty.The multi-stream drip emitter is an ideal sprinkler for watering annuals in a flowerbed or container. The pattern is a full pattern gentle multi-stream that extends up to 3 feet at typical drip operating pressure of 30 PSI. You can decrease the spray radius, or even shut it all the way off, by rotating the multi-stream head clockwise. The 10-32 male thread (MT) inlet on the multi-stream emitter connects to an optional 6 or 12-inch drip stake with 10-32 female thread (FT). The inlet also has a barb for direct connection to 1/4-inch tubing and you can then hold the emitter in place at each plant with a drip tubing Y-anchor stake. You can either run 1/4-inch drip tubing from a drip manifold, a 1/2-inch drip tubing “lateral” line, or directly off the hose faucet with a 1/4-inch hose faucet x 1/4-inch adapter. Recommended operating pressure is 30 PSI. For outdoor irrigation use with cold water only.
selin O
2025-08-31 14:39:32
I have the drip irrigation in my garden and used to use rain bird irrigation T-shape drip heads that I couldn’t get. I ordered this since it can be adjusted for 180 or 360 spray. It fits well in the tubing, the flow is good at a reasonable price. A little difficulty first but it went down into the tubing and very happy with the performance. Happy with the appearance also.
Laura
2025-08-18 13:09:16
Nice product.
Josh Farley
2025-08-01 12:15:31
These are pretty great. They pop into the hose easily without leaks and produce a nice adjustable 360-degree spray. One thing to keep in mind is that their spray distance is entirely based on water pressure, so the more you add to a line, the shorter their max range. So they work best when placed very near the plants to be watered, but if you don't use a lot on a line they can also water larger areas as well.Overall, exactly what I was hoping for.
An engineer
2025-07-26 18:16:31
These screw in units provide a lot of flexibility when changing or maintaining your garden. maintenance is good as you can easily replace the head as needed. I have had some of the emitters not seem to work as intended, hence a 4 star review. Another issue with these systems is the water pressure, both at the source and at the emitter. There are many factors that can affect water pressure, so you need pay attention. The usual solution is to put fewer emitters in-line if they are not seeming to provide the water needed.
Mike D
2025-06-15 14:14:34
These worked great.
jennifer
2025-06-03 16:18:04
Always works great.
frequent buyer
2025-05-29 17:25:21
They're very well shaped to make it really easy to insert into the hole in the drip hose. I wish they could be purchased in smaller numbers for the cases when you need to just replace 1 or 2.
LV
2025-04-16 17:21:25
Great addition to a drip system, in my case it has a great use for my succulents.
Israel S.
2025-02-17 15:18:54
Excelente que puedas regular el flujo del agua con solo apretarlo.
Bill
2025-01-21 15:01:11
All just great!!!! Thanks.
Recommended Products
