Your cart is empty.
Your cart is empty.
They will fit in a normal valve stem hole of .453".
Material: Metal
Max PSI: 200 PSI, Color: Chrome, Quantity: 4 Stem Valves.
If you have any questions before or after the purchase, please feel free to send us an email, we will try our best to provide you with good suggestions.
Logan
2025-09-03 10:59:20
I ordered the CKauto TR416 valve stems originally only to find that they don’t work on my Konig wheels due to the recessed step and the hole being too close to the wall for a washer to sit flat. After a little research, I found these and they fit fairly well. When I installed them, the rubber grommet that touches the outside of the wheel seemed a little sloppy, but once everything was assembled and snug, it didn’t seem like an issue. There are no installation instructions, so here’s a quick rundown of what I did: remove the two nuts, washer, and flat rubber grommet from the valve stem. Now you should have the valve stem and stepped rubber grommet left. Insert through the hole from front of the wheel. Working from the inside of the wheel, install the flat rubber grommet, washer, and 1st nut. I tightened the nut until I could see the rubber grommet starting to bulge. Last thing is to install the 2nd nut, and tighten it against the 1st nut. Search “double nut method†if this seems unclear. I had to use a thin wrench to hold the first nut while tightening the 2nd nut against it with a 1/2†socket. Also, I went ahead and applied blue thread locking compound to help things stay put. I can’t speak to longevity as I’ve only just installed them today, but they fit, hold air and look nice so 5 stars for now.
BurtB
2025-08-23 18:45:22
I needed a metal valve stem to use with a Mercedes rim for a spare tire for our RV.I tried one from the local auto parts store, but it was too big to easily install on the MB rim.So I needed on that could be installed and secured from inside the rim.I spotted these and gave them a try.The good:Appear to be solidly built.Easy to install.The "wish it was better":The only gripe I have so far is I do wish they were just a little longer. But they do work and I can get the tire gauge and air chuck on the valve stem when installed on the rim so that is a somewhat minor annoyance given that this is just for the spare tire.When installing this you do want to torque the nuts on the inside to insure a good seal. I also used some blue thread lock as added protection to prevent the nuts from loosing over time.So far no air leaks, and the tire has been holding air.If I needed more in the future I would order again.
Barry Cook
2025-08-20 12:50:57
Fit perfect no leaks
Placeholder
2025-08-17 10:55:41
Not very shiny, don’t know if they hold air. They are not on the wheels yet.
Tuyen bui
2025-08-05 09:25:56
Fit and work good ðŸ‘🿠good replacements.
T2
2025-03-25 14:32:44
good quality for the money 💰.
david zeegard
2025-03-22 14:59:33
Works good liked
Nathan
2025-02-09 11:06:50
Good figment
Sylvain
2025-01-23 11:34:49
Bon rapport qualité prix!
Recommended Products
