Your cart is empty.
Your cart is empty.
Features:
Attach to your tank in the pack.
Fill your air system leaving your pack on.
Material: Stainless Stee
Color: Silver
Length: 60''(150cm)
Features:
- High pressure 60" stainless steel braided hose.
- One female end and one male end.
- Working with in max 4500 PSI air pressures for replacement.
Package Included:
1 x Air Fill Hose
No One Specific
2025-08-31 10:52:20
Seems like a quality fill line. I bought it to use as a tether line. Too long for a fill line if you use a small cf tank to just fill gun tanks when you’re not tethering. Just seems like a lot of bleed off air each time after filling. I have a nine liter and a 4.7 liter and it works great for tether. Plenty of length so you won’t have to have your tank right up under your airgun when tethered. If I needed 2 I would buy it again.
Jenco
2025-07-09 09:21:09
Work great for my PCP fill wip .
Bonanza Pilot/Owner
2025-05-07 15:48:45
Excellent quality. Rapid shipment. Highly recommended.
Tusker
2025-04-07 11:46:26
I got this hose because I needed a longer one when at the bench using a tank & external regulator. The first time i hooked the hose up to the tank found it had a bad leak on the femail end of the connector. The fix was simple... unscrewed the female connector off and put a little bit of plumbers tape on the the male part of the threads, screwed the female connector back and haven't had any issues since... giving it 4 stars just because you shouldn't have to do that with anything brand new but after performing that simple fix, which literally took all less than 5min, having the lenght of this hose and esp. at about $20 is still a value. ðŸ‘
David Hallinan
2025-03-17 14:05:24
The hose is very sturdy feeling. I used it fill my PCP up to 250 Bar. It worked perfectly. It is long enough that I can tether my bottle to the PCP at the range without worrying it will fall off my shooting bench.
Nona
2025-03-08 10:55:37
Product works good for refilling.During continuous use hooking my large tank up to my PCP gun. I kept using to much air. I Did a water test and the hose leaks.
G.Mac
2024-12-22 10:03:18
I was wondering why my fill times were taking so long and noticed how quickly the tank was bleeding down when the compressor shut off. I got a bottle of soapy water and started checking the fittings and found the hose was leaking around the compression sleaves. If its leaking, send it back!
Kdk airsoft
2024-11-21 15:10:30
I use this hose on my refill tank for myBusiness. I probably wouldn’t recommend this if you’re looking for something very Flexible as this is not. It would give you a bit of movement but it would be heavy if you wanted to use it mobile. But it would be very sturdy and is built well. So it works perfect for what I’m using it for.
Recommended Products