Your cart is empty.
Your cart is empty.The PanaVise Tray Base Mount, allows you to neatly organize your small parts and tools. The cast aluminum base mount adds stability and has six integral parts wells with rounded and sloped walls for easy parts retrieval. The base mount is compatible with the 300 and 305 bases and some vise combos. It includes 6 non-marring, anti-skid pads and has three 1/4-20 holes drilled and tapped on the outer lip for mounting accessories such as the PanaVise Solder Station (Model 371).
Bob
2025-08-20 13:34:22
The Panavise model 312 base / tray is well designed and has a quality feel. I have owned a Panavise 300 for my electronics bench for more than 20 years. Added this base unit to provide stability. It has sufficient weight for most smaller projects and the base has a diameter of 8 inches. There are 3 tapped holes to mount the vise and the screws are included. The base is designed with convenient integral parts trays. The unit includes 6 self-adhesive rubber feet to prevent the base from slipping as well as tapped screw holes on the perimeter to add Panavise accessories. Nicely made unit!
Philip O. Zettle
2025-08-13 11:07:35
It is heavy enough to keep the vise steady without having to attach the vise to my desk. It some storage trays for small objects I am working with.
Kenneth Bibey
2025-08-06 12:14:23
Makes vice nice and stable will hold a rifle and level it to mount scope with!
Anthony J. Gumbrell
2025-06-16 15:22:18
I use this mount with the low profile base. It is well designed and very well made. I was worried until I tried it, that it wouldn't be the right mount, but it works great. It has rubber feet and stays put; and, it's completetly stable with no tendency to tip at all. The tray is very handy, and it's, also, light enough not to be cumbersome. I only wish I had gotten a Panavise years ago, because it's just what I needed.
Enlil
2025-05-23 18:19:10
Did everything I needed, with accessories, for processing custom circuit boards.
Omadna
2025-05-04 16:54:52
Just to expensive for a base. It is made well, heavy good quality, but almost $22 for a vise base seems a bit much. It is only $8 less than the actual 201 vise and nothing mechanical. I was afraid it might be to big, but it is okay, the trays are nice and the stability is really great. The 201 does good without it though, so you really don't "need" this base.
HAM
2025-05-01 10:49:20
Not a necessity but sure does compliment the PanaVise for a sturdy and stable base. I love the cast in small parts basins for keeping track of everything!!!
BW
2025-04-23 15:08:32
Very well made and has storage compartments for small parts.
MC
2025-04-07 12:03:38
Excellent kit for holding modelling parts . Be it for air spraying paint and gluing together.
WOLFIEE
2025-03-09 18:29:45
En la foto la vi pequeña,, cuando la saque de la caja de empaque,,,HOOOO ,Muy buen tamaño, pesada muy cómoda.
RickC
2025-02-21 10:01:58
Perfect base for my panavise jr. It is heavy metal and well thought out. No slippage and The parts trays are a god-send. Repivots in a flash. This whole line : panavise 3xxx is superb and well worth the cost. I have this, as well as the full blown pv 350. It held on to a pair of hd555's while I soldered and reglued the headband. Having the board/jack/socket/ or whatever I'm working on pivoted into the perfect angle makes repairs incredibly easier.
Mike D.
2025-01-29 16:58:36
Very stable and hefty base with convenient parts compartments that can support larger items that are offset substantially from the center of gravity. At eight inches in diameter it does however take up a fair bit of precious bench space compared to a clamp-on when you develop that inevitable clutter from projects. All in all, in my opinion, I'd say it was worth the investment.
Lee
2025-01-16 21:31:08
Solid base for optional components. Allows portability for the PanaVise system.
Recommended Products
$199.95
$ 80 .99 $80.99
$29.91
$ 13 .99 $13.99