Your cart is empty.
Your cart is empty.ACDelco GM Original Equipment Automatic Transmission Oil Cooler Hose Assembly is a GM-recommended replacement component for one or more of the following vehicle systems: automatic transmission/transaxle, and/or manual drivetrain and axles. This original equipment assembly will provide the same performance, durability, and service life you expect from General Motors.
John R. Pickens
2025-08-28 18:10:43
Arrived quickly. Fit perfect. This was by no means easy to install, at no fault to the seller. I jacked up the passenger side, only because I needed to install a wheel speed sensor. Had to pull the front clip off, plastic only. I removed the electric radiator fans to facilitate installation, personal choice. There is a black plastic piece that runs and bolts in across the grill and bolts in under headlights, I removed the screw bolts in order to maneuver the line attaching to the AT cooler better. Removed some fender liner screw bolts and 2 brace screw bolts. All wheel drive front axle made it even more fun, I would have dropped the axle but my jack started leaking fluid. Anyway 6-8 hrs taking breaks and fighting rusted screw bolts. Probably could do it in 4 now that I've done it once.. GL
Layla
2025-08-07 18:59:32
Take the old lines out through the back and fish the replacement lines in from the back. Can't believe all the reviews saying they did it from the front. That's the hard way.
motorhead
2025-07-14 14:28:45
DID THE JOB.
Customer
2025-06-23 19:11:00
Good, thanks.........
Nitrousbird
2025-05-13 12:45:02
Exact OEM replacement for my '07 Escalade EXT. It is a pretty easy swap other than needing to remove the front bumper/grill as a whole assembly to access the fitting to the transmission cooler.I HIGHLY recommend also replacing the other line at the same time, PN 15779543. The other line is cheap and a simple swap if you are already replacing this line. Though you can release the pins with a pick, I'd recommend getting the proper disconnect tool.If you do any towing, I'd also recommend swapping to a larger transmission cooler at the same time, as the factory one is inadequate for any heavy loads. There is an adapter kit for the Tru-Cool 40,000 GVW cooler that allows you to use the OEM lines/connections for a factory-like install.
Customer
2025-04-30 14:04:32
Very good price. Installed in all wheel drive truck. went in without having to remove anything else under the truck.
TIGER TYLER
2025-04-19 18:33:19
I have a 2009 Tahoe LT2 5.3. This cooler line kit is for models with the HEAVY DUTY COOLING SYSTEMS. If you do not have the heavy duty transmission cooling system you will need ACDelco 25999418 (although it says “this does not fit your vehicleâ€). Hopefully this will save someone the trouble I went through. Nothing bad about the product, just an inaccurate “this fits your vehicle†for my model.
Gregory Malcolm
2025-04-04 15:35:26
Fit my 2013 Tahoe LS perfect
LUTORR
2025-03-29 11:23:55
Bien hecho, de buena calidad, pero no le queda a mi Suburban 2010, ya que está manguera es para Suburban con radiador de aceite para Transmisión y mi Suburban no cuenta con el, y no le queda, pero si tú Suburban tiene Radiador de aceite de Transmisión seguro le queda.
Dinu M.
2025-01-24 09:37:26
Good fit.
Mike4523Jr
2025-01-23 14:32:33
Shipping was quick and other than challenges installing the lines, everything was perfect. Would definitely recommend this for anyone who has to replace the lines.
Recommended Products
$28.99
$ 14 .99 $14.99