Your cart is empty.
Your cart is empty.ACDelco GM Original Equipment ABS Modulator Valve controls the flow of brake fluid into your brakes, providing the critical anti-lock feature. These original equipment modulator valves have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
BuddhaShaolin
August 18, 2025
This does fit a 2012 Chevy 2500HD regardless of what the website says. This is for the Stabilitrac system and my truck was equipped with that system. Easy tell, you should have two incoming brake lines and four outgoing. You now have verified you have the correct part. Difficult install. It will remove fairly easily but be prepared to have the brake fluid drain out of all your lines as you remove each one. This unit will wiggle it's way out past the transfer case, tight fit, but it will come out. Install in reverse, but be very careful to not force the lines into the threaded sockets. You can not see what you are doing and have to feel the lines engage. Almost had a booboo on one line. Once in, you will have to refill and bleed your master cylinder, and then bleed your brake lines and then use a programming tool to bleed the antilock brake system. Buy a 1 gallon jug of brake fluid. You'll need it. Once you have removed the air from the lines, check for leaks, and clear your codes. Item was packaged well and works. This is the hardware side only, no electronics. My old one had a leaky internal valve on the inside electronics around one solenoid.
derek
August 12, 2025
works great
Kindle Customer
August 5, 2025
GREAT!!!!
raymond queen
July 31, 2025
leaks fluid within the month, would like a replacementshould last more then a month
greg
July 11, 2025
as advertised
george
July 2, 2025
Replaced part on 2011 duramax. Part is oem exactly the same. Much better price compared to dealer. Working great for a few weeks now.
Serge Cormier
July 1, 2025
-
Murry's truck parts
June 13, 2025
TRUCK REPAIR OF ABS BRAKES , CORRECT PART. WORKS GREAT
BuddhaShaolin
June 11, 2025
This does fit a 2012 Chevy 2500HD regardless of what the website says. This is for the Stabilitrac system and my truck was equipped with that system. Easy tell, you should have two incoming brake lines and four outgoing. You now have verified you have the correct part. Difficult install. It will remove fairly easily but be prepared to have the brake fluid drain out of all your lines as you remove each one. This unit will wiggle it's way out past the transfer case, tight fit, but it will come out. Install in reverse, but be very careful to not force the lines into the threaded sockets. You can not see what you are doing and have to feel the lines engage. Almost had a booboo on one line. Once in, you will have to refill and bleed your master cylinder, and then bleed your brake lines and then use a programming tool to bleed the antilock brake system. Buy a 1 gallon jug of brake fluid. You'll need it. Once you have removed the air from the lines, check for leaks, and clear your codes. Item was packaged well and works. This is the hardware side only, no electronics. My old one had a leaky internal valve on the inside electronics around one solenoid.
derek
June 10, 2025
works great
Kindle Customer
May 23, 2025
GREAT!!!!
raymond queen
May 17, 2025
leaks fluid within the month, would like a replacementshould last more then a month
greg
April 22, 2025
as advertised
george
January 18, 2025
Replaced part on 2011 duramax. Part is oem exactly the same. Much better price compared to dealer. Working great for a few weeks now.
Serge Cormier
November 30, 2024
-
Murry's truck parts
November 27, 2024
TRUCK REPAIR OF ABS BRAKES , CORRECT PART. WORKS GREAT
Recommended Products
