Your cart is empty.
Your cart is empty.Product Description
M. neese
2025-08-10 12:34:50
It’s works makes installation easy. I added electrical tape around pins on wiring harness to add a extra layer of security incase I hit a big puddle or body of water..
Christopher
2025-06-22 18:11:39
Worked great
rick dellinger
2025-06-20 21:53:03
Perfect
gomi
2025-05-06 09:47:56
Wife purchased some LED replacements for my 88 scirocco . The brights were plug & play, but the dims were reversed and didn't function. Swapping the ground for dim and leaving the hi beams the same gave me lows and (dual) brights as it should be. The connectors were a wee bit flimsy, but didn't snap I straightened them and it was all good. ðŸ‘ðŸ¼ðŸ‘ðŸ¼ðŸ‘ðŸ¼
Runion
2025-03-07 15:54:01
Partsam H4 9003 HB2 Wire Wiring Harness Sockets for 4"x6" 7"x6" 5"x7" inch Sealed BeamThese will work with any flat blade plug/socket.The only down side is the blade is very thin if you compare to the old sealed beam headlight blades.You may have to make adjustments to the OEM light socket to get the thin blade to work.They are put together well, the wire size is adequate for the use, the socket is ok.With the above concerns known, I recommend these adapters.I do not know the seller nor did I get any money or product for my random review.240318 1631
Domingo Perez
2025-02-19 18:08:39
ðŸ‘ðŸ»
Max
2025-02-01 10:03:39
They work. When checking to see if the wires are in the correct spot on the factory plug do not slide the male connector in completely. They lock in on a S-10 and when I went to move one, the wire came loose from the male terminal(bad crimp), A little solder and some new heat shrink tube, all is good. On a 1995 S-10 the black wire goes in the angled location ,red wire in the middle. Yellow wire in the last location of the factory connector.
Novy
2025-01-27 10:58:36
Fit well
Scott D.
2025-01-16 10:15:18
Great parts,good quality, worked perfectly.
Recommended Products