Your cart is empty.
Your cart is empty.This stainless steel wheel cover snaps onto existing wheel in minutes with a full retaining ring to hold it in place. 8-lug design fits all years of Chevy, Ford and Dodge 2WD and 4WD dually rear-wheeled pickup trucks only. Center of cover pops out for 2WD and for 4WD access. Fits: 2 and 4 wheel drive Ford F350 models 1985-2004; Chevy/GMC 1973-2000; Dodge 1969-2002. Trucks with BUDD wheels will not fit. Easy to mount - no tools needed or lugnuts to remove. T304L stainless steel for lasting beauty and durability. Fits Make: Select Chevy, Ford, Dodge, Works With: 16 in. wheels, Fits Models: Select 2 and 4 Wheel Drive Dually, Material: Stainless steel, Includes (qty.): 4
George Benson
2025-08-05 14:26:04
I've had these for quite a few miles the still look brand new ! Good product for the money . Fit tight but a good fit stay on very well. Good product
Hardy B
2025-08-01 13:34:53
WHELL INSERTS, JUST WHAT I ORDERED..GOOD VALUE AND LOOKS GREAT.INSTALLED ON A 95 25' CLASS C COACHMAN E-350 JUST DO IT ..YOU WILL BE PLEASED WITH THE UPDATED LOOK....LITTLE MODIFICATION HAD TO REMOVE ONE TAB FROM THE INNER RIM( WHERE THE INSTERT GRABS THE WHELL ) TO GET THE AIR EXTENTIONS INSTALLED, THEY NEED TO BE RIVITED TO THE INSERT SO THEY ARE NOT LOOSE ,EASY TO DRILL AND RIVET. GOT RIVIET GUN FROM HOME DEPOT WITH EXTRA RIVETS, THE EXTION KIT COMES WITH THEM BUT YOU ALWAYS NEED ONE MORE..NOT PART OF THE PRODUCT BUT DIDN'T WANT TO MESS WITH TRYING TO CHECK TIRE PRESSURE WITH OUT THEM, SO IF YOU PURCHASE THIS PRODUCT YOU MAY WANT TO INVEST IN THIS ITEM ALSO. GET THE STAINLESS BRADED LINES FROM CAMO.P.S. FAST FREE SHIPPING WAS INCLUDED..GOT THE PRODUCT WITH- IN A WEEK, EARLYER THAN PROMISSED...GREAT SHIPPING..DIDN'T EVEN NEED TO CALL AND SAY"WHERE IS IT"HAPPY SHOPPING..I'M ALWAY LEARY OF ORDERING ON LINE BUT THIS WAS A PLEASERERRRRRRRR.. HARDY B SOUTH FLORIDA
Customer
2025-07-29 10:23:03
Look good and improved the look of my motorhome that lost one.
GBro
2025-07-14 18:52:18
I spent a _lot_ of time looking at wheel covers (simulators) for my RV, and landed on a few key points:1) they are all somewhat marginal in quality2) they are all rebranded Chinese products3) they all eventually fall offI picked these units because they were _exactly_ the same (rebranded) as the ones sold by one of the big wheel simulator sellers (who's 'company' address is a UPS store), and also because they were priced as well or better than most of the other ones I found. Given the results of my research, I didn't see any reason to pay more for 'good' ones. They look great on the RV and seem relatively well made, considering the price. So, only time will tell how well they hold up.Modifications:I'm giving 4 stars only because I had to make a couple modifications to make sure they don't fall off. I'm sure this voided any warranty, but I figured the warranty is not worth much when they are laying on the side of the road somewhere.1) On the front covers, I peen'd over the inside lip where the center hub inserts press in. Apparently these center hubs will also fall out. I have no idea why these are even removable tbh, but it seems to be a common thing.2) On all 4 covers, I drilled two small holes and used #10 screws to attach the covers to small brackets that I fabricated that hook over the actual wheels. This seemed like a better looking/functional solution than the zip tie method that seems to be common. There is only one US company that manufacturers wheel simulators, and they use a method similar to this. Unfortunately, they did not have any that fit my wheels.I should also note that I looked at the type that screw to the wheel lugs, but I do not have enough thread exposed to use those. And apparently, they fall off too.side note: remember before online shopping made everyone's life so simple and you didn't get the satisfaction of wasting hours of your life becoming an expert in _everything_ just to save 4 1/2 minutes going to the store and buying what you wanted?
Gary S.
2025-07-04 21:01:26
These simulators are nice.. right out of the box, super shiny and very clean, smooth looking.. nice tight fit.. as well as the center knock out for the 4 wheel drive hub fits tightly. Not difficult to install as other reviews say.. they are designed well, that's how they're supposed to fit. No gaps between the wheels and the simulators.Hopefully they'll last longterm.Greatest price point I could find for the product and a company that is reputable. Highly recommend these.
Mike the Mechanic
2025-06-17 17:33:07
Great value for stainless simulators. This set replaced an identical set that was on the truck when I bought it six years ago. Other than a couple of small dings on the front covers the old units were still shiny and holding their grip on the wheels. On a road trip earlier this year on the miserable CA interstate highways I hit such a bad patch of broken concrete that I lost one rear wheel simulator and also broke a leaf spring on my car trailer. The fit and finish on these simulators is very good, highly recommend them.l
marion7169
2025-05-16 17:15:30
We had lost one of our hubcaps and were unable to find one that looks alike. So I purchased these and the look awesome. Great fit easy to install and hubby is happy. What more to say.
Michael Moore
2025-05-11 17:37:21
Terrible fit, do NOT buy! The overall quality seemed really high at first, then soon realized the issue. Bought these for the availability and didn’t read the reviews in detail, but I should have. The compression ring is too deep to allow them seat properly on a standard rim. Maybe a Chinese rim has a deeper inset, but these will 100% fall off of you drove with them. Already back in the box to return to Amazon. Worst purchase to date for sure!!
rosario rossi
2025-04-09 10:27:44
I love them but im missing 2 emblems that go on the center of cap only have 2 need 2 more
Roger8299
2025-04-04 11:45:36
Measure carefully because these hubcaps fit tightly. When installed properly (tap them home with a rubber mallet) they are unlikely to go flying down the road. They look good and are nice and shiny…a big cosmetic help that cover ugly hubs and rims when you get out the For Sale sign. Our RV sold to the first viewers and visual appeal was a big factor in a prompt, full price sale.
Larry Schultz
2025-03-24 13:41:13
The wheel covers were better quality than I expected. very happy
Customer
2025-01-01 16:08:04
The simulators fit and look good. Phoenix USA Inc on their website under product detail say the country of origin is USA and under Product features say they are proudly made in the USA. The box my simulators came in say they were made in China. The box listed all the patents and definitely had Phoenix USA GQ64 and proper symbols on the box. Definitely not what I was expecting to see.
Patrick Conseiller
2024-12-22 11:24:17
it's yes
Recommended Products
