Your cart is empty.
Your cart is empty.Product Description
Easy to apply
Follow the directions by cleaning the visor and fastening it to the inside, checking over to make sure it is sealed as tight as possible against the visor.
Motorcycle helmet visor self-tints in an instant.
It turns dark, but not too dark- more of a deep purple tone(indigo color) - quite quickly in the sun.
Eye protection
Takes the harsh glare out of a sunny ride.
- Make sure you're in dust free environment , and wash your hands!
- Do not touch the inside of the lense before you install this film! Otherwise you'll be looking at fingerprints or smudges.
- Followed the directions by fastening the film to the inside of the helmet shield.
- Easy peel-off without damage and with no glue residue left.
- Press the helmet visor photochromic film on the visor from middle to edge gently.Push over all the edges.
- Designed to work on FLAT visor lens, meaning a visor that does not curve out from top to bottom.
ATTEN : The change of colour shown will be a little bit vary depending on the brands of motorcycle helmet visors.
Dominic
2025-08-21 10:27:11
This is awesome! I followed the instructions, and was able to stick it to my visor with ease. The clarity is amazing! I swore my visor was open the first time I left my driveway haha. Haven't had my visor fog on me yet.
C. J. B. and D. J. B.
2025-06-24 18:58:43
Product is crystal clear once installed so far it seems like a great product that is easy to install, although takes time to get everything lined up just right. Will be testing later on today as it is cold outside and will provide a good example.Update: went for a test ride, this product is amazing and works flawlessly. I don't normally give a 5 star review on anything unless it absolutely blows me away. This product did just that! The final photo is of me after my ride, notice how everywhere around the insert is fogged over and would make riding extremely difficult and dangerous.Wonderful product, will definitely purchase again when I get a new helmet as these are NOT reusable!!!
1tzjr
2025-06-17 15:48:37
Wasn’t sure about this product but price convinced me and gave it a shot. Doesn’t fit perfect in my Agv K1 visor but covers most of the visor, won’t go on pin lock since it’s a bit smaller it just sticks on. It does its job and saves you some money. It is super sticky so set it up right the first time because it’ll be hard to take off and possibly ruin your visor. Overall happy and anti fog works great.
Jacks
2025-06-03 10:40:01
Easy to install. Clear vision. Really keeps fog out.
Customer
2025-05-23 12:49:26
Fails to prevent fogging.Distorts outside lights into JJ Abrams-style lens flares.Gets wedged between the visor and the helmet seal, when raising or lowering the visor.Does not adequately cover visor, leading to a distracting line across your field of vision.
Kelly C.
2025-05-18 11:14:46
For $14 I thought "why not?" I had Zero expectations this would work, but aftermarket heaters were more expensive than a new helmet so I tried it. It works 100% as advertised, the area around it fogs up, but not the covered area.I cleaned my visor and dried it thoroughly first before application and it stuck just fine. I will absolutely purchase again if this gets scratched up or peels off in the future.
mark in Ia.
2025-05-11 12:33:48
The + Not super cold yet, but use in the mid 40 degree weather does pass anti fog test. The - , when placing on inside of your shield, be certain to place as low as you can, while still in vision line. I placed mine a little high and it rubs the helmet edge when I flip the shield up. Hasn't pulled it off, but sticks annoyingly. But for the $ it works, I would purchase again, just be more careful in application
Felipe
2025-04-18 18:50:17
Work well.
Chad Plunkett
2025-03-23 12:03:40
Easy to install on my helmet visor. It's clear and changes tint fairly quickly in bright light. The only draw back is the side edge is right in the perpetual view.
Jason
2025-02-26 11:27:37
crap, i' don't even know if it works. wouldn't fit my helmet and doesn't stick. adhesive is only about 5mm around edge, fell off in seconds.
Adrian Greszata
2025-01-21 11:49:22
Installation was okay, maybe it was installed incorrectly? Seemed fine. I let it set properly and followed instructions. Doesn't work at all in the parking garage after a few breaths.Also not looking forward to removing it due to the adhesive. Won't recommend.
Luc Robert
2024-12-14 10:01:18
Oui ça fonctionne bien mais quand trop de chaleur la buée se fait entre les deux !
Recommended Products
$26.39
$ 13 .99 $13.99