Shopping Cart

Your cart is empty.

Your cart is empty.

Pillow Block Bearing 4Pcs 8mm/0.31' ID Silver Zinc Alloy Pillow Block Flange Bearing Self-Alignment KFL08

Free shipping on orders over $29.99

$9.99

$ 4 .99 $4.99

In Stock

About this item

  • Package Content: 4Pcs KFL08 Pillow Block Bearing Flanges
  • Bore Size: 8mm/0.31''. Mounting Hole Diameter: 5mm/0.2".Mounting Hole Distance: 37mm/1.46''. Bearing Inner Dia.: 8mm/0.31''. Total Size: 48mmx27mmx11mm/1.88"x1.06"x 0.43"(L*W*H)
  • Flange bearing is made of high-quality zinc alloy with high strength, which is durable. The high-strength rolling body with better load carrying capacity is more abrasion-resistant. Polished by high precision CNC machine tool. It produces low noise and high speed. It is not easy to get hot so the use period is long
  • The bearing has a wide inner ring with two set screws for attaching to the shaft. Self-aligning. You can adjust or replace the bearing easily.The vertical surface of the bearing can be adjusted and changed. If you find that the product is not perpendicular to the installation plane, please adjust it manually
  • pillow block bearings are widely used in various of machinery, power, mining, metallurgy, textile, agriculture and other industries, especially in food machine. The pillow block can also be used into conveyring systems, film processing machinery, spin machine and printing machine



Product Description

Pillow Block Bearing Flange

1

  • Made of high-quality zinc alloy with high strength, which is durable.
  • Produces low noise and high speed. It is not easy to get hot so the use period is long.
  • The bearing has a wide inner ring with two set screws for attaching to the shaft.
  • Widely used in various of machinery, power, mining, metallurgy, textile, agriculture and other industries, especially in food machine.

Product Specifications

2

Model: KFL08

Mounting Hole Diameter: 5mm/0.2".

Mounting Hole Distance: 37mm/1.46inch.

Bearing Inner Dia.: 8mm/0.31inch.

Overall Size:48 x 25 x 12mm /1.88"x 0.98"x 0.47"(L*W*H).

Package Content:4Pcs Flange Bearing.

2

Model:KFL000

Mounting Hole Diameter:7mm/0.28inch.

Mounting Hole Distance: 45mm/1.8inch.

Bearing Inner Dia.: 10mm/0.39".

Overall Size:60 x 36x14mm /2.36"x 1.41"x 0.55"(L*W*H).

Package Content:4Pcs Flange Bearing.

3

Model:KFL001

Mounting Hole Diameter: 7mm/0.28inch. Mounting Hole Distance: 48mm/1.9inch.

Bearing Inner Dia.: 12mm/0.47inch.

Overall Size: 63 x 38x 16mm /2.48"x 1.5"x 0.62"(L*W*H).

Package Content:4Pcs Flange Bearing.

4

Model:KFL002

Mounting Hole Diameter: 7mm/0.28inch.

Mounting Hole Distance: 53mm/2.1inch.

Bearing Inner Dia.:15mm/0.59".

Overall Size: 67x 40x18mm /2.63"x 1.57"x 0.7"(L*W*H).

Package Content:4Pcs Flange Bearing.

Model:KFL005

Mounting Hole Diameter:10mm/0.39".

Mounting Hole Distance:75mm/2.95".

Bearing Inner Dia.:25mm/0.98".

Overall Size:95x 60x22mm/3.74"x 2.36"x 0.86"(L*W).

Package Content:2Pcs Flange Bearing.


Centaurus7
2025-07-17 16:26:35
The media could not be loaded.
frank farrar
2025-07-13 17:23:41
I asked about operating temperature limits. (Below 50 C.) Actual technical support! Yay!Bearing is self-aligning, so installation need not be perfect. This feature also allows access to the tiny (1.5 mm) set screws, which only seem inaccessible. If the bearing arrives seemingly misaligned that's not a flaw and is easily fixed.If a bearing is needed for a hot environment and high rpm, as in supporting a motor shaft, look for all metal bearings having no plastic or rubber seals. I've not come across such for self-aligning bearings, but that might be because that feature is not always desirable.Even though I needed a different bearing design, this product is reasonably priced for intended uses and the seller was responsive. All I can hope for.
Steve Meier
2025-06-26 16:00:30
The metal is nicely finished. Good product.
Jason
2025-05-23 16:24:51
Works except the outer race that contacts the flange inner wall gets loose and rotates within the flange if your shaft is not centeredalso the the center-center screw hole should be 36mm , not 37mm, most KL08 parts are 36mm pitch
Nick Ploysa
2025-05-11 19:20:31
Replaced plastic bearings on a rock tumbler. These make the shaft spin so much smoother and they take a beating.
Nick Borja
2025-04-24 17:23:46
I'm very satisfied with the product, as it was exactly what I ordered. No dislikes . . . THANK YOU!
Stephen D
2025-03-15 12:49:38
Very unfortunate that out of the box, 2 out of 4 of the bearings were bad. I have spare balls and races, so I replaced them, but it didn’t fix the issue. Something integral is wrong with them, causing them to bind and then skip. Going to have to disassemble my project to get the 2 good ones so I can return all 4.
Shannon L.
2025-02-19 14:30:09
I received two orders, 4 items in each order. The first order had 3 bearings that turned smoothly. The 4th was hard to turn at first, and then had a gritty feel. It wouldn't have lasted long under load.Amazon sent me a new order (4 new pieces). The second set of 4 had the same problem. 3 turned smoothly, 1 felt gritty (just as before). Fortunately Amazon let me keep my first order, so in all I have what I need. But beware, I had two orders and 1 in 4 (both times) was defective.
Recommended Products

$38.11

$ 18 .99 $18.99

4.8
Select Option

$24.95

$ 12 .99 $12.99

4.5
Select Option