Your cart is empty.
Your cart is empty.Upgrade your car's audio system with the Pioneer TS-T15 3/4” Soft Dome Tweeter. This upper range speaker is designed to deliver enhanced sound quality and performance, allowing you to enjoy your favorite music like never before. The tweeter is an essential part of your car’s speaker system. Producing high-frequency sounds with warmth and clarity, pair this tweeter with midrange drivers and subwoofers for a full, vibrant sound. Hardwire included for flush or surface mounting to optimize tweeter fitment in applicable speaker locations, for improved acoustic performance and easy installation. With a maximum power handling of 120 watts and a continuous power handling of 40 watts, the TS-T15 soft dome tweeter can handle higher power levels, but truly excels in producing a more delicate and nuanced sound for a dynamic audio experience. This speaker is designed to deliver a warm and natural sound with clarity and minimal distortion. Upgrade your car speakers with the Pioneer TS-T15 3/4” Soft Dome Tweeter. Experience improved sound quality, warm high notes, and clear vocals, bringing your music to life on the road. Enjoy the Pioneer quality and elevate your in-car audio experience.
Manny
2025-08-31 13:13:54
These are quality tweeters and fit right into the original stock position on my Lexus. Slight modifications with the original bracket of the original tweeter and BOOM! Sounds great and it's tucked away clean, out of sight! Pioneer quality, enough said!
Tyler Chapman
2025-08-06 11:50:21
When I ordered them, they were the wrong speaker for what I needed. I obviously don't know a tweeter from a 2 inch dash speaker. I also ordered connectors which were the wrong ones. But I'm not one to return something.After cutting up the old speaker, placing the tweeter inside so id be able to mount it down and hard wiring them in, they turned out to be amazing tweeters. They are louder and more clear than the stock 6x9s I'll be replacing shortly. Amazing tweeters id buy them again and again.
Netmon
2025-07-18 12:23:03
I haven't installed them yet so I can't comment on sound qty, but, just from looking at them, worth noting,You see that ring around the tweeter? If you think you can separate that from the actual tweeter, and there-by fit it into a smaller cutout, be advised, it is glued in. and not in such a way as you might "exacto-knife" it out. IF it's going under the grill, so you don't care what it looks like, and you need it to be SMALLER probably your only route will be to put the outer ring to a grinder or dremel-tool-it.The listed 1-1/2" diameter includes that ring. Without it it's roughly, .8 to1.1" MY CUT-OUT is supposed to be 1-1/2" so I'm just saying, because the listing doesn't make it clear if that ring comes off. It doesn't.I gave it 5S based on packing, speed of service, and I got a good price, and on faith. MEANING I'LL BE BACK if it turns out that faith was not deserved.
Customer
2025-07-17 17:35:03
CRAP . How did these tweeters get a good review? I am a customer car specialist and have been scratching my head for weeks as to a legit way to mount these things.They make no sense whatsoever. What should be a stud, a nut and a flat bar is instead a couple dozen puzzle pieces that have no purpose but to drive normal people like me insane. This company has been in business how long and still finds it acceptable to build crap like this?I would NEVER mount something like this in a customers car.The Top mount concept has no purpose when you still have to cut a huge hole. The whole reason for a top mount tweeter is a single hole that can be capped in the future. You have to cut 3 holes over a 1" spread for these stupid tweeters.What locks these things in place is the friction between the poorly soldered randomly aneled wires and some twist lock function that is ridiculous and doesnt fit due to the chinese people building this junk haveing no concept of the engineers already senseless design.When you try to mount flush, the design makes not little sense, but NO sense. The 'twist lock' mechanism is now free to spin, and instead of sitting flush in it base, or having a swivel socket, it instead has to ride on top of 2 aluminum wings attatched to the 3 pieces of bracket required to hold the flush cup.The cutouts for the wires match the aluminum wings so you cant mount these with the Up side up, even though it is specifically labeled UP and the tweeter grill is branded, directionally of course.I've been doing this stuff for 10 years and it is disgustingly obvious that things are being made more and more retarded every year. I cannt accept hot gluing and double taping tweeters into a $60,000 piece of equipment just because the customer want his speaker grills to have the same name as his ipod hub.
Adam
2025-06-27 17:41:14
This is not just a plug and play setup. You'll need heat shrink connectors, heat shrink sleeving, potentially a wiring diagram, electrical tape, likely a dremel for fabrication, soldering gun, heat gun, knowledge on polarity and working understanding of capacitors and how to solder. I had no idea what I was getting myself into. 3 stars for sound quality but this was not easy and I'm an ex aircraft mechanic. End product was pretty good for the cost.
Edrick Hall
2025-05-24 15:25:28
Great sound
Jimmy Morales
2025-03-13 12:25:59
I got this like 2 years ago. They work very vell in my car even they are exposed directly to the sun light. Are very easy to install and helps you a lot to balance the sound around the car.
big sam
2025-03-11 18:45:52
i picked up a set of these to upgrade the factory tweeters in my 02 maxima since i was replacing the 4 door speakers. putting these in made a big difference in the sound, adds more clarity to the music. when your speakers are low in the door the higher frequencies get faded out so a good set of tweeters mounted at ear level helps bring them back.these come with everything you need for surface mounting or flush mounting....
Juan Carlos Alcantara
2025-01-06 11:01:10
El producto es de buena calidad y recomiendo su campra .
Chris
2024-12-12 18:43:41
The media could not be loaded.
Alan
2024-12-09 15:11:21
I was looking for some tweeters which would sound good and fit into the same openings as my stock speakers. These fit the bill and they look good too. The metal screen allows them to be exposed to sunlight without long term damage.
Antonio r.
2024-11-26 18:45:40
No suenan bien tienes que ponertelos al oÃdo para poder saber si están sonando o no
ed harlow
2024-11-17 18:52:22
Decent product for a fair price.
Recommended Products
