Your cart is empty.
Your cart is empty.Product Description
Adjustable Flow Speed Design
This irrigation system for potted plants consists of a slow-release control valve switch, vacation slow drip planter water will not become blocked by mud. Only adjust the valve to Meet your needs without complicated setup steps. A self watering insert for plants that save time and water.
Using our indoor watering can, don't need to worry about your plants withering during travel, business or on holiday, the plant watering globes will help you a lot.
-The watering spikes for indoor and outdoor plants, Keep Your Plants Healthy & Help You Take Care of Plants
-Drip watering system for potted plants is adjustable with the control valve, the watering system suitable for 3-5 day trips.
-Watering globes, no any tedious installation,don't need other tools.
-The plant self watering devices fits on most bottles with 1 inch inner diameter and 550ml capacity.
These self plant watering devices for small pots accurately calculate the flow of water, provide different amounts of water for different plants and flowers, so you may test it few times before best results. The bottle of 550ml water supply time about 3~5 days. Enjoy your holiday with your family, leave your plants to our vacation plant watering system, water globes for indoor plants self water your plants and vegetables, and make your plants thrive.
Inner diameter
This house watering can insert compatible with all 1.1 inch/2.8cm inner diameter, suitable for many bottles, not for mineral and purified water bottles.
Length of stake
Irrigation system for potted plants for indoor plants, the small outdoor garden plant waterer are long enough to hold securely on pots. No any tedious installation,don't need other tools.
Self Watering
Small water globes for indoor plants for outdoor plants, adjustable speed design, accurately control the flow and give appropriate amount of water for different plants and flowers.
How to Use
1. Tighten the knob on the control valve, place it into the spikes and tighten it. Put the device in the plastic bottle.
2. Make the holes at the bottom of the bottles or cut it. Insert the assembled watering device into the pots and fix it.
3. Insert the self watering spikes into the pot and shake it slightly to check its stability, Keep it firmly inserted in the pot.
4. Open the valve to let the water flow out naturally, adjust the speed of drip depending on the time you need.
Notes:
1. Make sure there is a hole in the bottle or the bottom of the bottle is cut off. Without air pressure, no water flows out of the irrigation.
2. Adjust the water flow to the maximum value before each use. Make sure there is no air in the watering spike. Then adjust the water flow slowly.
3. After adjusting the flow rate and burying the outlet of the irrigation system into the ground, the flow rate is most stable.
JayeGee
2025-09-01 17:33:54
It doesn’t work for me but it’s a great concept. You need to use a certain size of Coke or a Pepsi bottle and I don’t drink out of plastic pop bottles.
Not happy
2025-08-22 13:29:58
Didn't have time to send them back so I had to modify them in order to make them work properly. They don't seal properly on the bottle so they leak and over water the plants. They should provide soom gaskets with the product. Half of the values are not adjustable.
Lewis Morton
2025-08-17 13:44:05
Great idea but no way to make it work with water bottles because of smaller twist off caps.
Customer
2025-07-10 17:03:14
The valve does not work unless bottle is squeezed
steve
2025-07-07 09:49:02
nice to have , works well
Me
2025-05-29 13:02:47
Used these to water houseplants. The drip system is a great idea and the drip adjustment works well. The problem is fitting a water bottle to it. It took several tries and ended up making a bit of a mess. Once figured out they worked OK. Not great for small pots as a full water bottle will tip them over. Much better used with large pots or areas that need extra watering. The plastic is sturdy and doesn't break or chip easily.
Bob
2025-04-26 13:12:34
The stems don’t fit tight into the spike.You adjust them to work when your around and then you go away, to return to dried out plants and full bottles of water.Good concept, but components don’t give reliable water flow.
Renee T Lopez
2025-03-05 10:53:10
This is a great item to have.
TandMPalanica
2025-01-29 15:27:35
I couldn't find any bottle to fit that didn't leak.
HAJJI Rashid.G. shaikh.
2024-12-31 18:57:45
Not fix properly
Recommended Products