Your cart is empty.
Your cart is empty.Product Description
-
There are three hole diameters for you to choose from, 6mm/8mm/10mm, so you can use them as needed.
-
Set the depth on the jig, then set the drill collar to the correct depth and secure it with a wrench
-
Clamp the wood into the jig. You need to make sure that the jig is securely fastened to the board.
-
Turn on the drill and start drilling only when the drill reaches a certain speed
-
Confirm that the punch was successful? If it fails you need to reconfirm that the steps are correct.
EASY TO USE
VELNUT Pocket Screw Clamps are made of high quality aluminum alloy. It is durable and will not rust or crack.
15 degree drilling angle, bi-directional holes, equipped with a perfect cutter head, sharp and burr-free for easy drilling. Precise screw connections are realized and embedded screws can be invisible. Lets you fix/hide screws easily. A good helper for woodworkers
Ideal for building train tables, workbenches, entry hutches, bookcases and dressers and more
L. deBerry
2025-07-13 11:58:31
I actually got this for one of my daughters. She has never complained about it so I assume it works ok. I don’t do enough of the type of fastening that tool is made for to give it space in one of my tool bags. I use the technique on projects from time to time but do it freehand.
DENNIS D
2025-06-27 11:05:49
works for basic joiner applications
Customer
2025-06-09 15:58:57
I’ve made one and a half pocket holes with this jig. Why half, you ask? The drill bit is so dull already that it literally would not continue moving through wood. I suspect that it doesn’t help that the drill bit clearly hits the inside of the jig despite using the matching size for hardware/collars in the kit. Spend more money and get a better jig. That’ll what I’ll be doing at the home improvement store tomorrow.
Moto E
2025-05-22 15:43:38
Kind of cheap. The holes are a little big for the bit. I already broke a bit only second time using it but for the price I guess it’ll work.
IAN
2025-05-14 12:14:43
This is the most basic pocket hole jig, no bells no whistles. It will make holes for pocket screws, for whatever projects you have. You will need to clamp it to your workpiece, and you should spend some time practicing before using it on a final project.
mike pilz
2025-02-23 17:38:48
A slight step down from a Kreg but definitely worth the price for a DIYer
TheOne
2025-01-28 10:13:45
1. The Good: It does start a hole2. The Bad: The drill bits were completely dull when they arrived. I couldn't drill 1/2" deep into a 2x4. The device is difficult to hold in place when starting a hold. After barely starting a hole, you don't need this device but you will have to maintain the correct angle freehand. This device could also use extra long drill bits to a better job and get better penetration.
Sonny Customer
2025-01-08 16:11:20
Nothing sll very good
Recommended Products