Your cart is empty.
Your cart is empty.The 7.5 amp 1/2-inch impact wrench features a 1/2 in hog ring anvil for easy socket changes. The powerful motor allows for fast, heavy-duty applications. Perfect for installing and removing heavy fasteners, making PORTER-CABLE impact wrench easy with a forward/reverse rocker switch.
Gyropilot
2025-08-25 18:45:13
I used this to remove the wheel lug nuts, front hub adapter, and front brake caliper bracket mounting bolts on a 2014 Ram 3500 dually. The brake caliper bracket mounting bolts are torqued at the factory to 260 foot pounds. This tool zipped them right out with only a second of hesitation. It simply laughed at the lug nuts and hub adapter bolts, which are torqued to about 128 foot pounds. Great tool! A bargain. Saves a lot of wrench turning and wear on the body.
JeD216
2025-08-05 13:17:20
The media could not be loaded.
Customer
2025-07-15 19:44:29
Very happy with this impact, Don't use it that often but when i need it, It gets the job done.
Dan
2025-07-04 17:42:43
I do my own tire rotations and brake work on my vehicles. I recently bought a used vehicle that had a stripped wheel stud that I found when performing routine service. It had to be replaced. Under normal circumstances, my little pancake compressor is marginally capable of fueling my air impact wrench. For the stud work, it was very inadequate. So, I started looking at larger compressors and battery powered impacts. In the end, I settled on this tool as suiting my needs. Spared the expense/floor space of a large compressor and the chance of life/obsolescence issues with batteries. This tool is large, >12 inches, heavy (8lb); but it is powerful and convenient to use and store. I would prefer a direction switch over the rocker trigger. Be aware that it has no torque control settings and it has a lot of START/STOP fly-wheeling. I would be very cautious driving anything smaller than a lug nut or similar with it without some meaningful practice. I do like air tools. But, for the money, this tool works just fine on lugs and other large attachments and sits quietly on the shelf until I need it again. No fuss, no muss.
p diddy
2025-05-23 17:25:50
This was more powerful than pneumatic and variance that I've used in the past. It proved too large to fit into tight spaces on cars that I work on. It's also very fast. Well this is great for removing large and/or stuck nuts and bolts, it will too easily over-tighten fittings under 20mm or so.However, this is clearly built to last and would be ideal for tractors, farm equipment or large trucks.It's a great value. It punches as hard as $300 impacts but with a little less finesse.
Slapstick
2025-05-20 18:36:36
I bought this for my father for his birthday. He has used it several times around the house. Most recently it helped him change a lawnmower blade. For the price you cannot beat it! I like the fact that you plug it into use it and it does not rely on batteries. Very good value for the money. Very powerful!
Rob
2025-05-02 15:04:48
I tried to remove the sacrificial rod from our gas water heater with a 1/2" x 1-1/16" socket and a 1/2" breaker bar but when the water heater began to move from where it was perched on top of some bricks, I knew that it was time to try something else. I didn't want to risk a gas leak when the water heater started to move. That's when I read some reviews about impact wrenches and hammer drills. The consensus was that the right tool to use was an impact wrench since the two tools work in very different ways. I saw this reasonably priced 1/2" x 7.5 Amp impact wrench made by Porter Cable, and ordered it on the basis of other reviews. It was a great decision. There is nothing inexpensive about its construction. It is a substantial, quite heavy, shop tool that should last for a very long time. When I applied it to the frozen water heater rod, the rod began to turn in less than 1 second - lightning fast. Our water heater was only in use for 18 mos. and that probably explains why the rod turned so easily. We replaced the rod with an active anode rod also available from Amazon and made by Corro-Protec. This impact wrench will also be useful for removing lug nuts and frozen bolts.
C. Grant
2025-03-24 17:47:13
The media could not be loaded.
José Manuel Vázquez Ortiz
2025-03-20 13:37:24
Excelente herramienta, yo la compre para trabajos sencillos como en mi auto, y otras aplicaciones, buena potencia, herramienta robusta, el precio de la compra fue más que bueno.
Mathieu Cartier
2025-02-05 16:57:22
All 220lb of me stood on the breaker bar and couldn't loosen the axle nut. 2 seconds and the impact had it off. Worth every penny! Highly recommend for an electric impact.
Michael
2025-01-26 10:25:16
This impact loosened my seized axle nut with ease. Built well, heavy and comfortable to hold.
MartÃn
2025-01-25 13:49:05
Es la llave de impacto eléctrica más potente, funciona muy bien y no hay tornillo que se le resista. Es pesada pero con gran poder de torque. Responde adecuadamente al reto de desatornillar o atornillar. Por eso es importante utilizar dados de impacto. Es una marca de prestigio para los profesionales
Juan manuel
2025-01-12 12:01:45
1 año de uso casual y funciona muy bien, un poco grande para llegar a tornillos muy escondidos
Recommended Products
$104.95
$ 43 .99 $43.99
$257.40
$ 99 .00 $99.00