Your cart is empty.
Your cart is empty.
Introducing the 2-1/2-Inch Dust Control Flex Cuff with Key Hose Clamps by POWERTEC.
This coupler is designed to provide you with an airtight connection between a pair of 2-1/2” dust collection fittings or hoses. And it comes equipped with standard key hose clamps so that you won’t need unattractive duct tape or a messy assortment of screws. It’s a highly useful (and reusable) dust collection system accessory, as it allows you to interchange fittings and connect adapters to keep all of your dust collection tools connected.
Compatibility
These Flex Cuffs work exclusively with nominal 2-1/2” O.D. ports, hoses and fittings.
Construction
It’s made with high quality rubber to ensure long-term durability and possesses a flexible profile capable of conforming to the narrow range of sized ports.
Our Customers Have
• Connected 2-1/2” PVC pipe to 2-1/2” blast gate
• Joined a table saw to a dust sheriff as a temporary solution
• Connected a 2-1/2” table saw sawdust exit to a shop vac adapter
• Used along with the POWERTEC 2-1/2” Reducer to connect a shop vac to planer
• “No matter whether you own one or five of these, the wide range of practical applications are endless.”
Dimensions of Rubber Connector Cuff
2-7/8" OD
2-1/2-Inch I.D.
POWERTEC is a leading manufacturer of high quality woodworking tools and accessories, machines, and an assortment of OEM replacement parts. We are committed to exceeding expectations, while bringing the latest innovations, technology, and product development to the industry.
CPTNFNTSC
2025-07-24 16:52:23
This is a fantastic brand and worked great on my vacuum system.
HomeBrewerMattB
2025-07-17 16:53:34
I used this elbow to make an internal attachment point for my Ridgid shop vac so that I could attach some Casa vacuum bags (https://www.amazon.com/gp/product/B0835VRW1R) in the hopes of better filter life. If you're buying this for hose adapters, this is not the review for you.I used my heat gun to soften the ends of the elbow and shaped one end to mate up with the inside of my vacuum intake. The other end, I flared out a bit, so that the vacuum bags had something to 'grip'.I then roughed up the mating surface of the elbow and my shop vac, and used some JB-Weld epoxy (https://www.amazon.com/dp/B009EU5ZMK) to attach it all together.The ABS plastic of this elbow was easy to work with once heated. It was pliable enough to be able to shape without being too soft. I used the top of a squatty, short-neck beer bottle as the form for shaping and flaring the ends of the elbow; similar to a Red Stripe bottle.The JB-Weld took a while to fully cure (about a week) but everything has been holding together well, and I've used my shop vac quite a bit since adding this elbow and the vacuum bags (probably 24 hours of active runtime). The elbow is notably thick and very strong. Even after all the heating and shaping I did, it still was a tough piece.Again, I can't say how this works for fitment of hose-joining, but it's definitely a solid piece of plastic!
Customer
2025-07-08 19:24:34
Not 2 1/4 inches on the inside. Need rubber couplers.
Customer
2025-07-02 19:56:42
These couplers work and fit great. Used for dust collector.
Christopher C.
2025-05-15 15:40:29
Perfect for my table saw dust collection system.
jim
2025-04-23 09:45:02
Above
MrOnetime
2025-04-06 21:56:14
Perfectly described and good overall quality. The only part I don’t care for was the last screw handles to tighten the ties. Other than that not to bad .
Tom F
2025-03-21 13:33:21
allows me to branch off and have two dust collection points at one of my toolsI have multiple powertec fittings - would buy again
Customer
2025-03-19 17:27:34
Plastic fitting, hard to get this wrong, lol
Marcelo Espindola
2025-02-26 11:08:52
Produto de qualidade!
James Harvey
2025-02-22 11:10:10
So many shop-vac style hoses and fittings almost fit-this allows them to work together. Nicely made and easy to use clamps.
Leslie Johnstone
2025-02-18 15:54:57
I wanted to use this to redirect a 2 1/2 dust collector fitting downward from my joiner. It does not fit a standard male or female vacuum fitting. I had to use a rubber coupling on my existing female connector and grind down my existing male connector to fit this fitting's female port. Not a big deal if you have the equipment for machining parts but will probably frustrate many.
Recommended Products
