Your cart is empty.
Your cart is empty.Features: - Super compatibility. Crack more than 98% of the cards on the market. Suitable for ID and IC cards such as water cards, elevator cards, access control cards, etc. - Upgraded chip, intelligent protection system, built-in integrated antenna, support one-click cracking, import analysis function and anti-shielding writing - The third-generation imported chip can be cracked and cloned and compatible with 98% of IC/ID cards. Can read 125K, 134K, 127K low frequency cards and 13.56k high frequency cards - Proxmark3 RDV (PM3 RDV2) is an upgraded full version of PM3 EASY version. It supports UHF and UHF with a wider range - It has undergone 58 designs, 236 upgrade tests and 5 factory inspections - Refresh any version as needed. Sniffing, reading, cloning and copying operations for RFID developers - Support high-frequency cards and low-frequency cards. Support dual frequency, power supply high line detection. Support hardnested instructions, effective cracking - Detachable antennas for easy carrying and convenient application Product Parameters: Basic Parameters: - Model: PM3 RDV2 - Working voltage: 3.5-5.5V - Working current: 50-130mA - Length and width dimensions: 44 x 85.6mm/1.7 x 3.4" - Product color: black - Thickness size: 6.2mm/0.2" (the thinnest); 9.8mm/0.4" (with screws); 15.8mm/0.6" (with low frequency antenna) - Factory firmware version: 2.0.0 Other Parameters: (When the low-frequency antenna is installed on the right side) # LF ANTENNA: 29.84V at 125.00KHZ # LF ANTENNA: 32.31V at 134.00KHZ LF OPTIMAL: 35.39V at 127.66KHZ #HF ANTENNA: 28.43V at 13.56MHZ (When the low-frequency antenna is installed on the left side) # LF ANTENNA: 29.84V at 125.00KHZ # LF ANTENNA: 32.31V at 134.00KHZ LF OPTIMAL: 35.39V at 127.66KHZ # HF ANTENNA: 28.43V at 13.56MH Proxmark3 Description: Proxmark3 is an open source hardware, which is mainly used for RFID sniffing, reading and cloning. Proxmark3 Smart Tool: Promark3 Smart Tool is a simplified and integrated redesign specifically for Proxmark3. It pays more attention to practicality, operability, and retains all original functions. Proxmark3 Hardware: - Immersion gold craft and SMT - Original chips and brand components. Capacitors and resistors are branded, such as for Murata - Antennas are accurately matched, and special tooling is used for antenna testing Operation Files & Materials: - Provide IC/D card cloning tutorial, cracking tutorial, card simulation tutorial and sniffing tutorial - Provide original software firmware - Quick user manual - Provide operation videos for learning Integrated Operation Interface: - Provide command line operation - Provide the original English version of GUI operation interface - Provide Chinese GUI operation interface - Support interfaces in Chinese and English Package Included: - 1 x Set of Proxmark3 RDV
