Your cart is empty.
Your cart is empty.Product Description
Strong and Sturdy
√ Double-sided adhesive tape, easy installation.
√ Durable item, no drilling required.
Unique Design
Make your car look different.
---- Suitable for cars with antenna base size less than 3.8×2 inch (9.8×5.2 cm) and suitable for cars with no antenna on the roof.
(Pls confirm the size before purchase!)
---- The aerial shaft is made of softness high quality ABS resin, anti-knock and difficult to be damaged.
---- The cool Pearl White can make your car more eye-catching, and the unique streamlined shark fin design makes it more beautiful to your vehicle.
---- 100% Brand new aftermarket item
- The design is amazing, concision and modern.
- Make your car cool and distinctive.
- It can enhance the signal and achieve the purpose of decoration.
Install Without Damage
---- Double sided tape at bottom, and not easy to fall off.
---- Come with the needed screw to connect the wire to your antenna base and adhesive tape to ensure a good seal when mounting it over your existing antenna base.
---- Shark fin antenna, enhance the vehicle's signal with FM/AM connection cable inside and decorate your car.
Waterproof Material
---- The shark fin antenna is made of high-quality ABS plastic material, waterproof and wear-resistant.
---- This super functional antenna is a replacement part for your original antenna, it can enhance the signal and achieve the purpose of decoration, let your car more brilliant. It's time to replace the shark fin antenna for your car now!
Please Note
---- Please check the size before ordering. Not exactly the bottom of the rectangle, so the width of the edges and the middle are different.
---- After installing the antenna, you need to search the radio channel again to achieve the best results.
---- During the pasting process, please do not tear off the double-sided tape and paste it again, otherwise the adhesiveness will be destroyed.
How to use?
Step 1
Clean around the base to keep it dry and free of dust. And attach 3M glue to the bottom of the shark fin antenna cover.
Step 2
Turn counterclockwise to remove the original car antenna, leaving the antenna base.
Step 3
Fasten the antenna on the base with screws in a clockwise direction.
Step 4
Align the position and press down the shark fin antenna cover from all parts. Keep it dry for 2 days so that the double-sided tape can fully contact the roof.
After the fin antenna is installed, if you encounter problems such as poor signal reception, please pay attention to the following reasons:
- Do not test in the garage.
- The signal reception is not the best if the car is far away from the city.
- The original car radio has been modified or replaced, the effect is not so good.
- For shark fin antenna modification, the signal is generally slightly worse than the original antenna, but it is usually received normally when used.
- The original antenna of the car is directly exposed outside, but the shark fin antenna is separated by a shell, so the received signal may not be as good as the original antenna.
Brad
2025-08-24 13:27:41
Love it! At first it didn’t work but I didn’t care because I like the look of it and I use a fm transmitter to play my music. After I hit the scan button on my radio unit all my stations played crystal clear. Before I installed it I took the car thru a car wash. Then got home and used cleaner to clean the area before sticking the adhesive onto the car. I pressed down on the shark fin for a good minute to make sure the adhesive stuck. I have taken the car through multiple car wash and have had no problem with it coming off. Love the look of it. Downside the rubber seal was advertised with a white seal on the shark fin but it came with black seal unfortunately
Dave
2025-08-22 12:58:40
Good quality, looks great, and really improves the look over stock on my son's FR-S. Only complaint is the adhesive included isn't particularly thick and didn't stick great. I ended up adding silicone to properly adhere it. Can't beat the price, either.
David McC
2025-08-21 10:39:40
This one was too narrow to fit over the base of my Ford’s antenna. I returned it.The quality of the part is good. I liked the idea of the rubber base gasket both for fit and appearance.
Terryj
2025-08-17 11:13:04
Does not fit a KiaSorento Amazon said it did. I couldn’t measure I’m too old.
Fernando Piris
2025-07-31 20:53:26
Fits perfectly and it looks like it's from factory, recommended! It actually works as an antenna, good reception, I use to have a different one and it didn't work as well as this one
Sam C.
2025-07-26 18:34:47
Does not fit as expected.
Randall Jimenez O
2025-07-16 18:49:16
Great product, good reception. It fits perfectly on my Santa Fe 2015 and it has the same white tone.
Mauricio Lobo
2025-05-28 16:55:39
Excelente producto. Llegó súper rápido.
ADELAROSA17
2025-05-22 16:11:13
Levanta el prrformance del auto
Draise
2025-05-04 19:58:06
Comme sur la description.mais aurais aimer un rien plus large de 1 cm.
David Biz
2025-02-13 10:09:53
Gut
Leonardo
2025-01-08 18:01:01
Se stai cercando un modo per distinguere la tua auto dalla massa, l'antenna a forma di pinna di squalo potrebbe essere la soluzione perfetta. Questo accessorio non solo aggiunge un tocco distintivo al tetto del tuo veicolo, ma offre anche alcune funzionalità pratiche.Design e Estetica:L'antenna a forma di pinna di squalo si distingue per il suo design aerodinamico e moderno. Disponibile in diverse finiture e colori, si integra bene con la maggior parte dei tipi di auto, aggiungendo un elemento di stile senza essere eccessivamente appariscente. È particolarmente adatta per chi cerca un look sportivo o tecnologico.Funzionalità :Oltre al suo aspetto estetico, l'antenna a forma di pinna di squalo funge da antenna per il tuo sistema radio FM/AM. Nonostante le sue dimensioni compatte, offre una ricezione affidabile dei segnali radio, mantenendo la qualità del suono senza compromessi. È anche resistente agli agenti atmosferici e non interferisce con la navigazione GPS o altri dispositivi a radiofrequenza.Installazione e Durabilità :L'installazione dell'antenna è semplice e richiede pochi minuti, generalmente senza necessità di attrezzi speciali. Una volta montata, rimane saldamente fissata al tetto dell'auto grazie a un sistema di adesivi o morsetti. La sua costruzione robusta assicura una buona resistenza agli urti e alle intemperie, mantenendo il suo aspetto e funzionalità nel tempo.Conclusioni:In definitiva, l'antenna a forma di pinna di squalo è una scelta eccellente per chi desidera personalizzare il proprio veicolo con uno stile moderno e funzionale. Offre un mix equilibrato di estetica accattivante e prestazioni pratiche, rendendola un'aggiunta ideale per qualsiasi auto. Se sei alla ricerca di un modo semplice ma efficace per distinguere la tua auto dalla massa, considera seriamente di optare per questa antenna innovativa e versatile.
haiss
2024-12-27 14:03:05
Remplace l'antenne standard sans souci de réception. Esthétiquement sympa.A voir dans le temps si elle tient bien lors des lavages aux rouleaux. (Ca devrait vu la tenue de scotch double face fournis)Raison principale de l'achat. Marre d'enlever et remettre l'antenne de base.
Recommended Products