Your cart is empty.
Your cart is empty.Product Description
Description
High Quality
Premium malleable cast iron and Zinc coating, anti-corrosion and durable.
Size
Rod(thread) Size: 3/8", Max Jaw Opening: 13/16". Max. Load (Lb.): Top of Beam 500 and Bottom 250.
Usage
Suitable for Structural Attachment to Top Or Bottom Of Metal Beams, Or Angle Iron, Purlins.
W Largent
2025-08-09 10:59:09
Worked great as beam clamps. When purchased, it appeared as the bolts would screw into clamps. But, had to modify with nuts to clamp bolts in place onto beam clamp (one nut on top, one on bottom). Still, good value and sturdy to hold ufo lights on metal C channel/perlin.
cross_wings_wood
2025-08-08 17:59:13
I purchased these to attach electrical wiring to an I-beam ... worked great.
Jason
2025-07-30 13:26:18
Most worked out as expected, however about 10% of them stripped out as I was tightening them. Left me a little bit wary of those that I ended up using.
Customer
2025-07-25 12:36:18
Every other beam clamp I have ever used was threaded there the rod would go in. The ones I received are drilled smooth. And it was an unopened package.
Steve M. Larson
2025-06-26 10:03:14
Product was as advertised, delivered timely and without defects.Decent product that did its intended job
Laina Moultrie
2025-06-21 11:28:34
They were easy-to-use and saved our greenhouse in the wind and snow
Customer
2025-06-08 15:17:17
Needed these to clamp several pieces of metal together. Screws and welding were not an option.
Ian C.
2025-05-16 20:57:50
Why call it 3/8" if there are no threads? Its just a hole that you slide your all thread rod through and you have to put a nut on the other side to keep it from sliding back out. Kind of lame. I ordered off amazon to get a few quick til my order of real beam clamps came in....i didnt know about this "minor" detail until they came in. They'll work though.
M
2025-03-13 10:38:57
Damaged box some miss hing clamps and acres. Returned to seller by they did not receive the purolator shipment. Full refund issued
Benoit L.
2025-02-09 14:15:07
S endomage facilement au serrage
Customer
2025-01-06 12:07:26
These are ok not great quality/designNormal the holes are threaded so once they are clamped you use threaded rod or something similar to hang from the holes are just through holes the the casting is too small to fit a 3/8 nut so you need to have your rod /bolt long enough to go through the entire clamp and nut it through the top
Recommended Products
$49.99
$ 24 .99 $24.99