Your cart is empty.
Your cart is empty.Product Description
High quality
The clamp is hardwood with a steel hinge structure. One end has rounded jaw and other end has square jaw. Used to apply pressure to the clamping end of the fixture.
Key Features
Easy to use
Light weight and easy to use, no assembly required.
Widely used
Suitable for holding rings and other small objects when grinding and polishing, used for Jewelry Making Stone Setting Engraving Repair.
About Us
We are committed to providing best-quality products to increase your work efficiency. And you can enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month.
Customer
August 27, 2025
I recently started making wire weave jewelry and working with three, or four wires at a time, which are difficult to hold on to. I learned about this clamp from a video tutorial, and I'm really glad I bought it. I used it this weekend to hold three wires while I did some weaving, and it worked great! I'm so glad I bough it!
A.H
August 23, 2025
Not very great quality, but it gets the job done just fine
Freda huff
August 20, 2025
It needs instructions
Angela Buddenbaum
August 17, 2025
Perfect
BettyR
August 14, 2025
Exactly what I use in my silversmithing class.No complaints at all!
Sam
August 4, 2025
The hinge is loose, The wood is cracked and unfinished. The felt pads are hot glued on and are not aligned properly. Very unhappy.
Mark M.
July 25, 2025
It works. I do not know for how long the quality is terrible very rough edges can cause you to get a splinter.
Alexander Schump
July 16, 2025
This is great, except for one complaint. The tips aren't leather. That is like, a foam so they will melt under heat. Easy to use and makes holding hot or tiny jewelry easy.
Justin Davidow
July 13, 2025
Unlike the picture; the "wedge" used to clamp the vise is wildly the wrong size; (too large) so it barely goes into the clamp. The angle of the wedge is just... wrong. This means it tends to work itself loose under any sort of actual use.That said; the wedge can be recut and adjusted without much fuss; it's just one more thing to need to do.The ends are.. VERY rough. They could have been cut cleaner with a hack-saw. This sucks to handle as the edges are sharp and rough and right near where your hands sit. Nothing a little sanding can't fix; but again, meh.The pads are just EVA foam hot-glued in place. Creative; though I strongly doubt it'll hold up for long in use. Again; easy enough to replace with some leather scraps, but meh.The jaws don't line up - this is a common problem for these units due to the way the hinge works; the parts need to be custom offset to "line up" at the end. This in no way affects operation unless you're attempting to grab a small, round rod; and need to maintain it's rotation: the action will tend to cause such items to twist when clamped. I don't honestly consider this a problem, just pointing it out for others.Overall, as parts, the price seems a little high, but with quite a bit of TLC these will make a great addition to any jewellers toolbox. If you want something polished out of the box that "just works"; buy something else. Otherwise these are "ok".
Customer
July 2, 2025
I recently started making wire weave jewelry and working with three, or four wires at a time, which are difficult to hold on to. I learned about this clamp from a video tutorial, and I'm really glad I bought it. I used it this weekend to hold three wires while I did some weaving, and it worked great! I'm so glad I bough it!
A.H
June 30, 2025
Not very great quality, but it gets the job done just fine
Freda huff
June 19, 2025
It needs instructions
Angela Buddenbaum
May 23, 2025
Perfect
BettyR
April 19, 2025
Exactly what I use in my silversmithing class.No complaints at all!
Sam
April 4, 2025
The hinge is loose, The wood is cracked and unfinished. The felt pads are hot glued on and are not aligned properly. Very unhappy.
Mark M.
April 2, 2025
It works. I do not know for how long the quality is terrible very rough edges can cause you to get a splinter.
Alexander Schump
February 21, 2025
This is great, except for one complaint. The tips aren't leather. That is like, a foam so they will melt under heat. Easy to use and makes holding hot or tiny jewelry easy.
Justin Davidow
January 26, 2025
Unlike the picture; the "wedge" used to clamp the vise is wildly the wrong size; (too large) so it barely goes into the clamp. The angle of the wedge is just... wrong. This means it tends to work itself loose under any sort of actual use.That said; the wedge can be recut and adjusted without much fuss; it's just one more thing to need to do.The ends are.. VERY rough. They could have been cut cleaner with a hack-saw. This sucks to handle as the edges are sharp and rough and right near where your hands sit. Nothing a little sanding can't fix; but again, meh.The pads are just EVA foam hot-glued in place. Creative; though I strongly doubt it'll hold up for long in use. Again; easy enough to replace with some leather scraps, but meh.The jaws don't line up - this is a common problem for these units due to the way the hinge works; the parts need to be custom offset to "line up" at the end. This in no way affects operation unless you're attempting to grab a small, round rod; and need to maintain it's rotation: the action will tend to cause such items to twist when clamped. I don't honestly consider this a problem, just pointing it out for others.Overall, as parts, the price seems a little high, but with quite a bit of TLC these will make a great addition to any jewellers toolbox. If you want something polished out of the box that "just works"; buy something else. Otherwise these are "ok".
Recommended Products