Your cart is empty.
Your cart is empty. Note: The color of the item may vary slightly due to photography and your own computer / Phone
If you are not 100% completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange!
7° design create a lower center of gravity ,changed the layout of the car,stronger climbing ability.
Fit for 1/24 1/24 RC Crawler Axial SCX24 Gladiator & dodge power wagon
Specifications：
Item name: LCG (Low Center of Gravity) chassis frame for SCX24
Material: high quality carbon fiber & Brass
RampCrab SCX24 Parts Package Included:
carbon fiber Chassis (1 Set, Right & Left)
Body mounts (2)
Side tray for chassis (2)
Brass skid plate (1)
Battry tray (2)
Recever Tray (1)
Links (8)
Zip Cable Ties (4)
Double sided tape (4)
M1.4 nuts (10)
M1.6 washers (10)
spacers for shock absorber (4)
Screws 1 Set
Threadlocker × 1
>
Note: Please check your specific model's manual for compatibility, or contact us.
Ryan P.
August 11, 2025
Awesome chassis kit for the price links are Awesome also
Kendra R.
August 1, 2025
The kit itself well thought out. The carbon fiber frame rails are set up well. (Note: the shock tower mounting points are drilled smaller to allow you to thread in your shock screws and hold. Don't drill these out like others in the reviews unless you plan on running lock nuts.) The 3d printed parts seem to be good quality.The two bad parts are: 1) No instructions, which isn't terrible since I do this regularly and used the Amazon pic for reference. However, if you're new, some instructions would be nice. 2) The screws are cheap and strip, not where the threads are but where your tool goes into the head strips. Using higher quality screws remedied this for me. If you don't have any buy a screw kit from a reputable company like Mofo RC, Little Guy Racing Parts, Mazz Designs, etc.Other than that. Great kit for the price.
steve willis
July 27, 2025
Includes everything you need to assemble it unlike some of these $80+ plus kits that require you to buy a $10 screw kit also.
Austin Rapp
July 25, 2025
Overall the kit is nice but the links that come with the kit are backwards witch isn't a big deal it just doesn't look esthetically pleasing also one side of the frame the holes for the shocks are good the screw goes right through but the other side will need to be drill because the screws do not go through freely also with the links the one pivet ball the screw goes through the other side of the link is threaded witch can make it difficult for instalation but besides that great kit.
Jesse
July 24, 2025
As stated in other reviews. The holes are way too small for the hardware. I went through and tapped all the holes before attempting but the screws are junk. I would recommend purchasing a hardware set to go along with this set.
lc70
June 19, 2025
please check quality control come parts are missing
David Tullio
June 17, 2025
This kit comes with everything you'll need. Literally everything from a skid plate, to frame rails, battery tray, hardware, and links. PERFECT chance to build a rig from the ground up with a light weight frame giving you the opportunity to keep sprung weight low while weighing down the rig from the axels down.
er
May 10, 2025
The chassis is nice and comes complete with links and other hardware.The screws suck ang strip easy.
Dalton kilbreath
February 21, 2025
Kick ass
Owen starkey
January 31, 2025
Had to buy some deadbolt links to pull the wheel base back to 133, this is because the skid plate rear link locations are pushed backwards compared to stock.Second complaint is the brass links have threaded bushings, they're supplied with loctite, and I recommend you use it because the screes work themselves loose without it, and that was just from rolling it around the work bench. The kit comes with little nuts, but they aren't locknuts, again use loctite or double up the nuts to lock them together.The ESC and battery mounting kit is pretty useless, I haven't used them as they place the battery & ESC in a high up location that either goes against LCG or interferes with a body if your running it low. The other 3d printed parts like the side skid plates, are useful, but poor quality - like rapid 3D print quality, I had to tidy up some of the holes to use them effectively.Definitely not an off the shelf solution, but if your happy to tinker and modify, you can get some good results.
allan
November 23, 2024
I like this kit, my truck does show an improved lower cg, my only complaint is the links... the link ends are proprietary to the flat rods, so aren't easily changed, and they are soooo sloppy. Very loose. The hole thru the ball is too big for the screws used. It probably doesn't matter much. It's not a race car...
Steve R.
November 13, 2024
Went together well, minus the body, as the wheelbase is longer due to the skidplate. Ordered some deadbolt links to hopefully bring the rear to where it should be
Recommended Products
