Your cart is empty.
Your cart is empty.Product Description
Features:
Led display
Inductive measurement system
Response speed: 3.2m/s
Auto power-off, when no use for 5 minutes
Power on when the measuring face moving
Specifications:
- Resolution: 0.001mm/0.00005”
- Accuracy: ±0.002mm/0.000005”
- Repeatability: 0.003mm
- Protection grade: IP65
- Light indicating at “0”
- Range: 0-3mm
- 3V lithium battery, life>1 year
Instructions
Flip over the device, make the top surface of the device touch with the surface of worktable
or workpiece.
Long press zero buttom to reset the position to 0.
Fix the device on the worktable, conduct the cutting tools and chucks towards the measuring face until 0 point.
In the meantime, the LED lights up, that means the " 0 " position has been set.
Characteristis
Product Usage:
- Z-axis setter with table, can be used for metal, non-metal (plastic, wood, glass and any other material workpiece) Z-axis height measurement and correction.
- Packaging with shock-resistant design, stylish appearance, to ensure maximum safety of the instrument.
With step design!
- The Z-axis setter is a tool for calibrating and setting the tool length of CNC machine tools with a setting height of 50±0.01mm.
- Step design, large measuring area, can measure tools larger than 44mm diameter.
- Sensitive measurement.
- Easy to operate.
- High accuracy.
Attention:
- The bottom of the setter contains magnet adsorption settings, the bottom screws are used to fix the table core dial, usually do not dismantle, only positive adsorption of the horizontal plane to use, can not be side suction.
- Small spring force to avoid damage to the tool.
And227
December 3, 2024
Not accurate. The manual/paper that comes with it says is it 2" in height...... it's not. See pictures. This will make your tool setting inaccurate in your cnc machine. When 0.0001 counts, this thing is not even 0.004 accurate
Recommended Products
$155.00
$ 67 .99 $67.99