Your cart is empty.
Your cart is empty.Product Description
D. Fawkes
2025-09-05 17:03:08
I wanted to make some custom ring-bound books for my D&D group, and this does the job nicely if expensively. Good solid action on the levers.Only issue I have is the ring-binder is a little finicky and doesn't always crimp evenly (the end towards the handle sometimes leaves a little, but I think there's a fair bit of operator error involved there as I've gotten prefect binds out of it.Otherwise works great. The hole selectors are very crisp, the depth selector works well, and no issues with feeding spiral bindings through the resulting punched.You need to do a little work to get Letter to punch evenly. Using the listed LETTER setting causes you to have half-punch. If you adjust it just a little bit past, you'll get nice even spacing.
friendof
2025-08-29 12:17:56
I have loved using this for my classroom. Takes a little getting used to. Found where you can set the size of the coil you are using and that made a huge difference in the closure consistency of the coil.
CKR
2025-08-07 14:31:40
This is a great piece of equipment if you want to have a professional-looking document on a budget. The only issue is you must be very careful about how the wire sets in the crimping area. The wire tends to fall over, and it won't crimp correctly. The magnetic strip on the back of the crimping area does help hold the wire in place. Other than that one inconvenience, this is a great addition to our office.
Gregory J Evans
2025-07-28 13:12:20
Great Binding Machine
Rebeccah
2025-07-26 15:33:41
The very first day, I had tons of issues. Let me start off by saying this SEEMS like it’d be a great machine when it first arrives and came with more binding spine extras than I expected. It’s metal, sturdy, and pretty heavy, however, the machine itself I believe is defective and I’m so disappointed.It comes with cardboard to punch to get rid of the black oil used to lube the machine however, after punching the entire cardboard that came with it, and additional cardboard suggested by the seller, along with several sheets of copy paper, it still continued leaving black residue on the paper.The punches were not clean and looked horrendous and extremely unprofessional, definitely not professional enough to sell.It says it can punch up to 15 sheets of 20lb copy paper. That’s completely false. For me, it struggled with just 5 sheets of 20lb copy paper at a time and forget lightweight cardstock. The handle heavily resists upon bringing the lever back up and makes an awfully loud noise that sounds like the punching pins are scraping against metal.I tried to contact the company and initially they seemed like they’d be helpful, but only apologized for the oil issue and in the last correspondence tried to make it seem like the noise of the pins scraping against metal was normal and the photos I sent of the awful punches it was making and oil left between the paper was somehow my fault and insinuated that the paper I used was coated and that was the reason (the paper wasn’t coated).Returning and have already bought an Akiles to replace it. It’s cheap for a reason!
Sean Halvorson
2025-07-20 18:16:25
First off, this binding machine does work, you just have to put the binding in perfectly for it to work well.The binding comb has to be placed with the small loops down, and the whole binding completely flat against the back. If it is out of alignment at all, the binding will twist and you will either have to start from scratch, or do what I do, and squeeze it with your fingers to make it work.When it does work, the bindings look incredibly professional, when it doesn't, neither do the bindings.
DJN
2025-06-30 14:56:48
/var/folders/y5/nt1ngktj02v6p99yg1yhflch0000gn/T/com.apple.iChat/Messages/Transfers/718KPYKWqGL._SL1500_.jpgThe black handle that goes over the end was broken. I need another one
Customer
2025-06-22 17:09:18
awesome
Cliente de
2025-06-13 14:53:43
PEDÃ DOS PORQUE ES MUY INDISPENSABLE PARA AGILIZAR EL TRABAJO
Bela
2025-05-14 16:18:09
Nach langer und intensiver Suche bin ich bei dieser Bindemaschine hängen geblieben.Auch wenn es online nicht wirklich viele brauchbare Reviews gibt, habe ich mich mit einem etwas unguten Bauchgefühl letztendlich für dieses Gerät entschieden und wurde zum Glück nicht enttäuscht!Sie sieht natürlich nicht so schick wie z.B. die Cringe von WAMK aus, macht dafür aber einen sehr robusten Eindruck. Ich habe mit ihr direkt in den ersten zwei Tagen 60 "Abschlusszeitungen" mit jeweils 74 Seiten gelocht und gebunden. Dabei sind keine Probleme aufgetreten die auf die Maschine zurückzuführen waren.positiv- schweres Gewicht und dadurch sehr stabil- sehr wenig Plastikteile, wodurch das Gerät sehr robust wirkt- es lassen sich wirklich 15 Seiten a 80g/m2 problemlos lochen- Din A4 Format und kleiner- die Löcher können durch die Hebel individuell eingestellt werden- der Randabstand lässt sich ebenfalls verstellen- das Binden klappt mit etwas Übung auch sehr gut, die Einstellungen am Gerät stimmen dabei ebenfalls- die Griffe können schnell abmontiert werden, damit das Gerät verstaut werden kann- der kleine Papierschieber auf der Platte ist fest und hält das Papier durchgehend im richtigen Format, sodass alle Seiten wirklich gleich gelocht sindnegativ- das Fach für den Stanzabfall sitzt locker, weswegen dieses bei Bewegung der Maschine etwas rausrutschen kann- die Markierung auf dem Randabstandhebel ist, glaube ich, falsch geklebt. Jedenfalls lässt sich der Hebel nicht bis zur letzten Farbe eindrücken. Beim Einstellen braucht man auch etwas Fingerspitzengefühl, da die Unterschiede zwischen den drei Stufen eher minimal sind. Wenn man dies weiß, ist aber auch das kein Problem.
Co321
2025-05-11 13:00:14
Excellent produit! Je suis très satisfait!
alebu78
2025-04-13 18:37:16
Mi ritengo soddisfatta del acquisto per il momento, c e' scritto massimo 15 fogli ma io non ne metto piu' di 10 perche' fa molta fatica a bucarli, ci sono le istruzioni nella scatola in tutte le lingue e in piu' se si scannerizza il codice QR si apre un video che fa vedere il fuzionamento della macchina. Per mettere i fogli vi consiglio di non metterli frontali come fa vedere il video perche' a un certo punto si forma della polvere nella fessura o puo' capitare un pezzo di foglio e quindi i buchi vengono male, io li metto laterali e li faccio scorrere fino alla battuta cosi' se c'e' polvere o carta si tolgono alcune volte li faccio scorrere a sinistra e a destra cosi' e' sicuro che ho tolto la sporcizia. La carta bucata va dentro un contenitore che si trova alla sinistra della macchina abbastanza capiente , in piu' a sinistra c-e' una rotella che serve per dare la pressione giusta per la chiusura degli anelli dovete fare delle prove perche' in base alla grandezza degli anelli si calcola la pressione. Per la rilegatura c'e una calamita dove vanno appoggiati gli anelli si attaccano li poi con le mani si fa scorrere verso il basso e con la leva piu' grande si abbassa e gli anelli verrano chiusi. Nella confezione si trovano ache una busta degli anelli ad aspirale in plastica nera, e degli anelli a battuta in alluminio nero.
adeline podo
2025-02-13 11:14:51
Un bon produit il est résistant est pratique par contre les premières impressions font de l huiles dans les trous bien se servir de feuille de brouillon sinon tout est parfait à voir a s usure
Recommended Products
$49.99
$ 22 .99 $22.99