Your cart is empty.
Your cart is empty.Product Description
- Weight:306g/0.67LB
- Hole diameter：8mm
- Made of aluminum
- It looks cool and solid
- Fit under dust cover
Improve Sound Quality
Sufficiently eliminates warped records wobble,holds the record flat against the platter,improved the sound quality.
Weight distribution is centered nicely by bottom pad. It help to reduce the noise out of records.
Low Profile
The turntable weight is short enough to fit under the dust cover.You can close the lid to stop the dust entering when you are playing turntable with record weight.
Soft Pad On The Bottom
Eliminate any potential scratching to any vinyl and center the weight distribution on record nicely.It help to protect your precious collection.
Right-Size Hole
The hole is 8mm in diameter,allow stabilizer being more centered which looks much better when the record is spinning.20mm in depth,fits well on spindle.
Charming Appearance
The finish is glossy.It feel very sleek when you grip in your hand.It looks cool,classy and elegant,match the fashion style of record player.It is made of aluminum, looks solid,heavy duty.
Mark
September 3, 2025
Very nice record weight. Looks great, very high quality and works great too. I chose the tall version in silver.
JWB
September 1, 2025
I had very low expectations. I was ready to call it out as the emperor wearing no clothes. But lo and behold, from the first record I put on, The Beatles White album, I could hear an extra richness. So I immediately took it off and played it again. The sound went back to a thinner less resonant version. Even my son and wife, who are not audiophiles, said they could hear the difference. I have been excitedly playing my albums in random order, discovering new sound qualities on my extensive collection. Lower bass, less wow and flutter, increased clarity. I can play the records louder too because it reduces feedback from my subwoofer. We’re talking about a 3-5% increase in sound quality. Like going from 128kbs mp3 to 320kbs. If your ears can hear that on your system then do not hesitate. Very affordable. And it fits perfectly under my closed dust cover. I am in sonic heaven. A must for vinyl fans.
Pappy
July 31, 2025
The FEMELI Record Weight Stabilizer is a must-have addition to any audiophile's setup. It seamlessly combines a touch of class with a robust and well-made design, all while enhancing the performance of your turntable.Here's why this record weight stabilizer deserves recognition:Pros:Classy Elegance: This stabilizer doesn't just do its job; it does it with style. Its classy appearance adds a touch of sophistication to your turntable setup, elevating the overall aesthetic of your vinyl-listening station.Heavy and Well-Made: The weight and build quality of this stabilizer are impressive. It feels substantial and durable, ensuring that it effectively does its job of stabilizing your vinyl records during playback.Performance Enhancement: Beyond its looks, this stabilizer significantly improves the performance of your turntable. It reduces vibrations, enhances tracking, and ultimately results in a cleaner and more precise audio experience.Rating: âââââIn summary, the FEMELI Record Weight Stabilizer is a standout accessory for vinyl enthusiasts. It marries elegance with functionality, providing a heavy, well-made solution that significantly improves turntable performance. If you're looking to elevate your vinyl-listening experience and add a touch of class to your setup, this stabilizer is a wise investment. It's more than just an accessory; it's a statement of your commitment to high-quality audio and tasteful design. Don't hesitate to bring this heavyweight performer into your vinyl world.
diane slater
June 13, 2025
This hockey puck works great.i own about 200 albums and there are some that are perfectly flat.this weight keeps the album flattened out on the plater which makes for accurate tracking.just wish I did this sooner.good product
Eyewanders
June 8, 2025
Decent value for a weight. Not much to say. The finish on it is very well done. I don't care for clamps but i can notice sonic improvement in *some* albums with the weight in general. For slightly warped records, depending on the type and severity of the warp, it can make a very large different in playability.Overall, looks good, finished nicely, good heft - not much to complain about.
Stephen Foundling
June 6, 2025
The turntable weight is low profile and is well engineered with a brushed finish. It fits right over the spindle in the album and works to dampen any vibrations the turntable may have while spinning up. Easy to use and easy to store, does it make a difference to the actual frequency generated by the cartridge and stylus, until I hook up an oscilloscope to actually view and measure the waveforms, unknown!
darkrider
May 16, 2025
I'll be the first to admit, I was a bit skeptical about the true usefulness of stabilizers, so I figured I'd try one of the less expensive varieties first. If you don't have older vinyl and are rocking primarily heavy weight 180g pressings, the Femeli Record Weight Stabilizer (or any stabilizer for that matter) shouldn't be necessary. However, if you have some older vinyl or lighter weight pressings, a stabilizer will make a significant difference in stability and sound quality. I've got a vintage JVC QL-Y5F table that has the electromagnetic servo tonearm that already accounts for warpage, but I'm still hearing a significant difference on my older/lighter weight vinyl in back to back testing with/without the stabilizer. I have the high profile (heavier) version of the stabilizer, and it seems to be the perfect size/weight combination, especially for those with high torque direct drive tables. If you're using a belt drive table, I would probably recommend going with the lower profile (lighter) stabilizer (or even a clamp vs a stabilizer), especially if you don't have pitch control to adjust speed. Even then, having this much additional weight at the spindle may cause premature belt wear. It is also worth mentioning that clearance could certainly be an issue for tables with low profile dust covers. My QL-Y5F is a big table to begin with and has plenty of clearance, even with the lid down. Overall, the Femeli has made me a believer in the usefulness of stabilizers, and the build quality is very good for the price. It's a perfect fit on the spindle, has a nice quality felt backing to protect your vinyl, and is perfectly balanced and wobble free. After using it for a few weeks, I see no reason to upgrade. It's a keeper!
Nicoxd
April 24, 2025
A good object to put in the middle of the record and it let the record play better with a better sound
Diógenes
April 1, 2025
Se siente bien construido. Ajunta bien a mi tornamesa. Si ayuda a nivelar los discos con ondulaciones ligeras. Para mÃ, la mejora del sonido es mÃnima.
Colin
March 25, 2025
I was keen to receive this item and experience the benefits on the sound, but before I even used, found I was disappointed at the build quality in that the felt on the bottom was off center, would not expect this considering the price of this item
Damien Watkins
February 28, 2025
Fits perfectly under REGA lid. Returned another grand found this one. Perfect
Simon
January 11, 2025
The item works really well and is finished to a high standard. The hole in the middle is little too large which means the spindle doesn't fit snugly and the weight can sit ever so slightly off-centre, but it's not a big deal. It would be nice to see a range these items built to different weight specifications to suit everyone's individual needs.
Abe Khamis
January 9, 2025
I'm not going to trawl through a thesaurus to find adjectives that describe the 'improved' sound heard by the use of a record weight. Sonically, I struggle to hear any difference. But what this stabilizer does do well is flatten those slightly warped records that in turn greatly improve stylus tracking. I can at least see the improvement!
Recommended Products