Your cart is empty.
Your cart is empty.Product Description
Easy to install
Step1: Align the license plate bracket on the front bumper. And use zip ties to tight the license plate bracket on the vehicle.
Step2: Align the license plate and frame on license plate bracket, Install washer & head screw bolt incorresponding position, and tighten them to the vehicle with included screwdriver.
Step 3: Install the screw cover over the washer. And push the screw cover down firmly until it engages with a snap.
SIZE: 12" X 6"
Bracket size (6" x 12") fits US & Canada license plates.
Won't cover license plate or registration sticker.
100% street legal
License Plate Bracket Frame
-
-
-
Silicone License Plate Frame
Subdued 3D Stars and Stripes USA Flag Front Rear License Plate Bracket Holder, Black Rattle Proof w/Mounting Accessories
-
American Flag Patriotic License Plate Bracket
3D Aluminum Metal Embossed Custom Novelty Vintage Auto Parts Decoration 12 x 6 Inch w/Screws
ScottDH
2025-07-30 10:37:02
I have purchased several of these license plate bracket holder frames and they are a great cheap alternative to OEM ones. They go on well, are easy to use and look nice and sleek on most bumpers. I haven't had any issues with them falling off or having any issues.
BA Cruzn
2025-07-26 16:31:52
Using the stock license plate only, my license would have been mounted only by the top two holes. This plate allowed the license to be mounted through all four holes and a solid clamp
Aggieroadmiles
2025-07-12 13:32:29
So, it worked great. My two reasons for not being for stars is that I would rather have the threaded metal inserts for the license plate screws, and I would provide two extra screws for attaching to the vehicle bumper. You can see in the picture that the plate did not fit flush, but the plastic plate has enough flex to form fit to the bumper. Another option would be to provide a bumper offset out of rubber. I haven't decided which that I will do.
Devin Sizemore
2025-07-03 13:06:41
This product was great. I used it on the front and back of a 2008 Highlander. Easy to install, holes lined up well and when the plates were installed they fit well and are very snug! Definitely recommend.
Sassy
2025-06-27 17:58:55
I’m so glad I found this! I love Lexus but they give you the ugliest bracket for your license plate that’s way bigger than the standard size! Imagine my horror when I go to pick up my plates and bring my pretty rhinestone frame and they mount it on this horrid bracket! I understand the grill is curved but why an oversized bracket? It’s just not necessary. I tried to live with it but it bothered me every time I looked at my beautiful car with an ugly bracket also so close to the Lexus emblem! This was the best thing I could have found and since I saw a positive review for an Es350 I knew I needed to try. And it worked perfectly! I was even able to get it to hang lower on the grill further away from the emblem. It’s super quick and easy to mount but word of advice if you have the same curved grill you will need a screw double the length of the Lexus screw because this one doesn’t fall as close to the holes as the Lexus one. Also make sure it’s the same size and the same tread - I didn’t check the tread of the screws and kept trying ones just double the length that seemed to fit the holes but they wouldn’t stay secure then I finally realized it’s because of the tread. Luckily I finally found the perfect match in my garage. Otherwise a quick trip to Home Depot would’ve done the trick. I’m posting a pic of the screw I found compared to the original Lexus screw and some others including a before and after. It’s very very secure and tight. You don’t have to live with the ugly Lexus bracket!! But this and you’ll be very happy!!!
DANELIA CANALES
2025-06-04 10:34:32
Five stars.
MikesDuneRunnerSLS
2025-05-29 17:12:03
The top left mounting hole stripped out and wouldn't come to torque. This think looks so classy with 3 screws holding the plate on. Buyer beware!!!
Seahawks4life
2025-05-13 11:27:32
I had bought a used 2007 Acura MDX but it didn't come with the front license plate mount. I bought this and it is made out of cheap plastic. It'll get the job done but if you hit something, it may just break and fall off.
AJ of Toronto
2025-04-02 17:06:27
My SUV has a low and small front license plate bracket. The issue I was having all the time for so many years was that everytime I ran my SUV through the car wash, the front plate would either bend to extreme levels, or when I had a cover on top, it would warp and eventually snap the cover off.I removed the original bracket and replaced it with this one and.... shazaam! Fixed all the issues. No more bent plate or broken covers. And it comes with everything you need. Multiple screws, screwdriver and washers. Very easy install! Highly recommended!
Igor
2025-03-29 10:48:31
Good quality as described
Dany
2025-03-21 11:38:10
Bought it to side/grill mount my licence plate, worked a treat. I didn’t give it five stars because1. the zip ties kept breaking when i was tightening them. they weren’t even tight yet and just decided to break2. came with 6 screws- two big ones and four small. the big ones threaded into the licence plate holder, no clue what the other four were for. maybe they were for mounting onto the bumper (so they’re self-tapping), but it would’ve been nice to have all six the same size and threadOverall, $22.59 after taxes was worth it
S. Rossiter
2025-02-26 10:06:28
Just as advertised. Easy to install and is a sturdy fit for the front plate of my RAM 1500. I am very happy with my purchase and the seller.
Andrew Kelly
2024-12-30 17:17:28
No issues
Recommended Products