Your cart is empty.
Your cart is empty.Product Description
The Windshield Sunshade Make Your Car Cooler! Most front window blinds on the market are old-fashioned sunblocks that are not easy to install even take-up space. SEINECA provides the latest retractable sun shade, which is more convenient to use and bring a more pleasant experience to your daily use. Its accordion design makes it easy to pull out and fold. The thickened suction cups can be tightly held on the front window, making the installation easier.
How to install?
Firstly
Rinse the entire suction cups under warm, almost hot, tap water, shake off excess water. Wipe the targeted surface with a clean cloth, then press the cups onto the desired surface.
(Tips: a little water adds a lot of suction power)
Secondly
Cut off excess part if necessary. Measure the size of your windshield and make a mark on the sun shade then cut it into a perfect size.
(Tips: a knife will work better than scissors)
Thirdly
Two installation methods:
1. Attach the sun shade on the passenger side and another single suction cup on the driver side.
2. Attach the sun shade on the passenger side, hang the suction cup directly on the hook.
Finally
Grab the handle and pull slowly to the other side to hook the single cup.
Or stick the single cup on the other side (if you use the second method in the third step)
(Tips: Soaking the suction cup in hot water at 140°F to 158°F for 5 minutes, it will restore performance.)
leslie phillips
2025-08-30 13:41:19
The sun shade opens and closes easily, however you need to do it slowly! The fabric is a metallic paper-like material, so if you just let go of it, it will not accordion fold and you will have to spend some time pinching the pleats. Just go slow and it works great!I put it in our Santa Fe, so it is plenty big enough for a large window. In a smaller car you may be able to cut it down to size, not sure.Just bought another one several months later and THIS one has suction cups don't stick! I will try to contact the company about providing cups that work, but otherwise it is useless. My old one still works great!!! So disappointed.
Alyssa Jauregui
2025-07-21 16:05:28
I had another one of these before, but unfortunately that company stopped making them or selling them on Amazon at least. In comparison to my last one, this one feels much cheaper. It is made of a single thin Sheet and definitely feels Like you have to pull it slowly or it’s going to rip. The suction cups are good and it does quite well. It doesn’t cover my entire windshield , there are gaps on the top and the bottom. I didn’t realize that I was buying two of these. They should be selling these individually. I paid $50 for two, wouldn’t buy again but won’t be returning .Update: I gave this product 4 days and I am absolutely annoyed of it. As said previously, it doesn’t cover my entire windshield first of all and I have a sedan. Next, when I attempt to close it, it is a disaster. It doesn’t recoil well, it’s so paper thin and cheap that it struggles to get back to its resting position. It’s already crinkling . It’s popped off when I have left it on during work. Because of the large gaps on the top and bottom , it doesn’t do a good job at keeping the sun or heat out. Just don’t waste your time on this unless you’re willing to spend a few minutes after each use, carefully putting it back together .
Easy Rider
2025-07-17 13:19:52
It's not meant to be put up and taken down after each use, but you can. It stays stuck to your windshield next tot the passager side window support. Takes 2 secs to deploy and 2 secs to put away. Springs keep it reeled up when not in use, but the material can be badly wrinkled or torn if mishandled. It can easily be tailored with a pair of scissors to a custom shape. I think the top and bottom portions can be cut up to 6 inches shorter than it ships.I really like it as a solution and will probably by one for each of my vehicles. It's just a bit pricy and not suitable for vehicles that will sit for days of weeks at a time between uses.
Andrew Mills
2025-07-09 12:06:44
I bought mine a little over 2 years before this review. It has worked for me.The suction cups do lose suction now and then. Boiling them in water helps to rejuvenate and get them to work better. I haven't experimented with other suction cups for this application, but small ones of similar size generally offer similar quality function.In the picture, you can see the top of the screen fans out when closed. It's slightly annoying, doesn't really affect the product's function or cause difficulty with visibility driving.The biggest problem I've had is with the "clip" that attaches to one suction cup to keep the screen open is made of a fairly poor, brittle plastic and has broke twice. The first time, the top section broke and I thought to fix it, but it worked to fight gravity and clip from the bottom up. The clip has completely broken a couple days ago, so I was looking into whether I could just get a replacement clip (I'm a little cheap to spend another $30, but I would probably be down to buy a $6 clip).However, I will be manufacturing a replacement with wood and gluing it to the existing, broken clip.I wonder how effective this actually is. There's gaps on the sides, since it's mounted by the suction cups. I kind of wish it had kind of an overhang so the shade would cover the whole window. My custom wood clips may well provide such functionality on the clip side.TIP: It seems like most of the problems people are complaining about is due to them not properly cutting the shade to fit their windshield properly. I never cut mine, although I have thought to cut out where the rear view mirror is to help it sit closer to the window.I also found it helpful to open/extend the screen, then open my visors to help hold it in place.
David
2025-07-07 16:05:12
Installed on 2016 Chevy Silverado 1500 truck. I gave it 3 stars since it requires a lot of delicacy. The key to having it work right for you is by placing it on the glass, mark where you need to cut, cut little by little, don't put the whole shade in the scissor but cut little by little to make it flush on the windshield like the picture. Once you have it setup pull it Softly to open it and let of it softly with your hand still attached to it. If you mistreat it it'll get messed like the pictures people have uploaded. It's like paper material, it's not plastic and the string can cut into it which isn't good. As for the results I like it and I got window shades on the doors as well making my vehicle completely dark and cool all day long. Install it properly, have patiences and you'll be fine.
اØمد عصام
2025-07-06 21:26:13
المنتج يعزل الشمس بنسبه كبيرة
Maria RamÃrez
2025-06-30 15:17:58
Súper protección uv. Además es sumamente práctico colocarlo.
bandar Almalki
2025-06-08 10:10:05
اشتريت الكبيرة والصغيرة، الكبيرة اÙضل سهلة الطي والÙØªØ ÙˆØ¬Ø¯Ø§ ناÙعة ضد الشمس. الصغيرة لاتنطوي بسهولة تتشربك
shempy
2025-03-23 13:36:59
Great concept,good execution
Mohamed Esmail
2025-02-10 10:40:52
الشداد اتكسر بعد استخدام اقل من اسبوع
Recommended Products