Your cart is empty.
Your cart is empty.Need a set of fins for your inflatable stand up paddle board Retrospec has you covered when it comes to all iSUP accessories. This set of three fins is essential for more precise steering and can be used in tranquil or wavy waters. One of the best parts of buying this set of fins is that they are removable so you can install them easily on your board and then remove them for simple storage and transportation.
bluemoose
2025-08-31 20:14:53
The fit is a little snug but the length at the base is the same as the original. Much thanks to the guy that posted the pictures with all of the dimensions.
Andrew Wilber
2025-08-19 10:50:49
Good fins that fit nicely on my existing paddle board that I lost find for. Brand was not the same so they seem to be nicely compatible across brands. They seem sturdy and well made! Happy customer
pbarrette
2025-08-18 21:42:38
First off, there are 3 fins in this package. One large fin marked as 9in and two, identical smaller fins with no markings at all.The "9in" fin is actually 8.58in, or 218mm tall and is a perfect fit for item B09B387QTB.I think a lot of people are getting this for other paddle boards and are confused about measurements and fit, so I've decided to actually measure them.The large fin:The large fin is 218mm (8.58in) tall.The base is 35mm wide, 4mm tall and 180mm long.That base slides into a T-slot on your board with an open center channel. The lip which fits into that channel is 16.5mm wide at the rear and tapers to 19.5mm wide at the front. The lip is 5mm tall. The base extends 5mm to the rear of the lip and 6mm to the front of the lip.There is a rectangular hole in the fin into which a securing key slides. That hole begins 37mm from the rear of the lip. The other side of the hole begins 120mm from the front of the lip. The hole itself is 14.5mm wide and 4.5mm tall.The small fins:Both fins are identical and have the same measurements.The fins are 122mm (4.8 in) tall.The base is 21mm wide, 4mm tall and 144mm long.The base again slides into a T-slot on your board with an open center channel. The lip which fits into that channel is 8mm wide with no taper. The lip is 4.5mm tall. The base extends 5mm to the rear of the lip and 6mm to the front of the lip.There is a rectangular hole in the fin into which a securing key slides. That hole begins 24mm from the rear of the lip. The other side of the hole begins 96mm from the front of the lip. The hole itself is 14.5mm wide and 4.5mm tall.I have attached some marked photos which are hopefully useful.
Pat
2025-07-26 09:47:58
The media could not be loaded.
Miss grey
2025-07-13 10:24:10
They are hard to put on and lock in, they work great and is hard to break. But expect to not be able to fully get it on and locked
E. Henion
2025-06-28 12:31:00
I haven't actually used these fins yet but I wanted to share that all 3 fins fit my Dama SUP. The Dama I have is this one: https://a.co/d/0bIQDm4kThe fins appear to be the same quality as any of the other fins that came with my boards.
Cristina Z.
2025-05-02 11:42:20
These worked great after we lost our fins at the bottom of the river. They fit your average paddle board great!
BobnShell
2025-04-26 16:46:58
Order it once and all the fins fit. So I ordered 3 more sets. The new sets the side fins didn't fit my board and fall off. There are no dimensions listed on the page.Going back!
Suzy
2025-01-20 15:14:59
I have an Oddpaddle SUP and have struggled to find replacement fins since I broke one last year. Tried and returned 3 different ones. These actually fit! So excited to get back on the water!
Canuel
2025-01-15 19:36:44
S'adapte bien au paddle
Customer
2024-12-29 18:54:42
Parfait pour xylove
Monique Wasney
2024-12-11 17:02:46
These fit our Niphean SUPS. They seem more durable than what actually came with the boards.
Sylvie
2024-11-27 10:28:53
Pour mon paddle et j espérait que sa marche pour mon paddle et sa été le cas,donc très satisfaite de mon achat.
Recommended Products
$23.99
$ 11 .99 $11.99