Your cart is empty.
Your cart is empty.Product Description
CG
2025-06-04 13:21:59
I have a 2012 f150 fx4 crewcab with 3†level and 33†FALKENS. I also placed pocket style fender flares which looked funky with stock wheels. These spacer brought the tires out to the edge of the fender flares and increased the stance and appearance of the truck. Seem to be good quality and fit without modification to the studs.
Nestor
2025-05-09 21:37:35
This spacer gave my truck a slightly more aggressive stance. It made my wheels go from flush, to slightly stick out. It's a process to install and if you have large wheels, they may force you to cut your plastic bumper for clearance. I have 33's and had to do some trimming. Another con is the mud/dirt that now makes it into the cab and all over my trailer. Getting mud flaps to fix this, but if you're looking for the stance. This is a great set.
Jeremy B
2025-05-06 13:00:38
I purchased the 1.25†spacers so the factory studs stuck out about .25†past the spacer and since I do not have the cut outs on the back of my factory rims so I had to cut off a small portion of each stud. Watched YouTube videos and found that a sawzall with a carbide tipped metal blade worked the best. I used about 3-4 total blades I purchased from Harbour Freight along with the torque wrench to tighten all the lug nuts to 95 ft/lbs. Additionally, I used anti-seize on the back of spacers when installing them so they’re not a pain to get off in the future when you have to do brake work, etc and the red locktite for each factory stud.While I was at Harbor freight I also purchased a wire brush wheel kit and stuck one of those on my drill to clean off all the old dust and surface rust from the hub before installing the spacers.I’ve had them on for a few weeks now with no issues, drives smooth and I’ve been on the highway and pulled my trailer with no problems. Hopefully long term they remain this way.Good luck and hope this helps. Take your time and do it right.
Gerald Stollings
2025-04-22 14:27:12
Great experience with no problems
E
2025-04-12 12:44:28
Just what I needed
Angry Bob Mechanic
2025-03-16 19:50:42
I put 33s on the stock 20s, 3 inch lift (supreme suspension) it just didn't have the offset for that look.These solved that problem.2 inches would probably been too much.Probably 800 miles so far, no problems.ðŸ‘
TX371
2025-02-19 15:37:30
These have no hope of ever fitting a 15th gen F-series because the outside diameter of the lip is .16 mm larger than the inside bore of the stock Ford wheels. Looking through the reviews it seems some people have had some issues and resorted to grinding.The dumbest part is that the inside bore that fits over the hub is oversize so it’s not like the tight lip would accomplish anything even if it fit.What a colossal waste of time. Returned.
R scoot
2025-01-12 14:49:10
Worked liked they should receive them on time fit perfectly
Recommended Products