Your cart is empty.
Your cart is empty.From the manufacturer
N. Vollrath
September 5, 2025
I’ve used the $10 tubing cutters from HFT and A-zone for years, and I thought that’s just how tubing cutters were. When my last one wore out I thought I’d have a look on Amazon to see what others liked, and this topped the reviews. Still took me three months of dilly-dallying to convince myself to spend $45 for a unit I felt should be $10, but gave in and ordered one because I have a ton of metal conduit and tubing to cut. WOW!! This thing is the Rolls Royce of cutters! The Bentley! First of all, it’s huge. It probably weighs a full pound, has multiple rollers with bearings, cutting wheel with bearing, and it’s so well made that the slide never binds and the power screw never jams. It’s like silk. It cuts through 1†EMT like butter, never a hiccup or jump or squeal. It doesn’t wander off track, it doesn’t jam, and it’s very forgiving even if you accidentally over-tighten the cutter a bit. So far I’ve probably made two dozen cuts (?) and it’s actually a pleasure to use it…I’ve been using it instead of a jigsaw or sawzall even for cuts I could do with the saw just because I like using it.I believe this is a tool that will last a lifetime. We’ll see how long I live and how long it lasts, but I’m super happy. Absolutely would buy this over and over if I had to.
Jessie
September 1, 2025
Gotta say, I didn't know much about this company and their products being someone who had a smaller cheap one that wasn't really all too great. Saw how many people here held this in high regard and decided to pull the trigger for a project needing 5/16" tune cut.First use with this was eye opening. The cutting, feel, and just overall build quality was top notch! Cut through a stainless steel tube like butter then proceeded to keep doing that on repeat for a few more cuts.The large knob was comfortable to use and turns like silk making it just the most effortless tool for this job.Only thing I can ding it on is the clam shell packaging with no easy opening but nothing a good sharp box cutter can't fix.If you're on the fence, I'm saying take the plunge. It'll definitely be worth it!
Andy
August 21, 2025
I was a bit skeptical of whether this would really work or not, but I was very pleasantly surprised. I needed to make a handful of cuts in some stainless tube, and it worked great. The key was just tightening a little each time. I was amazed at how easy it was, and the cuts came out very clean without any need to file the ends.
Jay
August 20, 2025
I installed a high pressure misting system with 3/8†stainless tubing. I first tried cutting this with a standard copper tubing cutter and while it worked it was a lot of work. Once I switched to using this cutter it was easy peezy and I was able to cut through the tubing so much faster and cleaner. It was well worth the money to pay a bit more for this cutter in order to make the job go smoother. There were many frustrating parts to this project but every time I need to cut the tubing it was the one part that just worked and I never regretted spending the money on this tool.
Gadgeteer
August 4, 2025
Having a center bearing applying pressure on the opposite side of the cutting wheel makes a very easy and nice cut! The extra bearing also help to make the tube very stable while cutting. I’ve had a few other Rigid tubing cutters; but this one is my favorite so far.
Daniel Patterson
July 24, 2025
Bought this because I couldn't find my old tubing cutter. Naturally after I got this I found the old one. But this one works better. Makes a clean cut very easily, no tendency of the cut to spiral down the tube.
All came the way as described
July 22, 2025
The product was great exactly what I was looking for price was reasonable and worth it I had a wedlock cutter didn't cut as smooth as the rigid one
Barber Technologies
July 10, 2025
I cut 6'x1" stainless steel tubes into 2' sections in less than 5 minutes. This thing is a beast! I canceled my order for a ferrous metal saw blade and do not regret it. It tracks true. If you cut conduit/pipe, you know what solid tracking means. Quick, accurate, handy size, and easy to use. What more could you ask?
Anatolio Velasco
July 9, 2025
Excelente herramienta, cumple con las especificaciones y trabajos descritos por el vendedor. Se ve bastante robusto para mà es sinónimo de Batalla.
Craig Ryder
June 16, 2025
Makes cutting stainless tubing easy!
Jangus Rangus
June 15, 2025
This is a nice cutter! I use it to cut 3/8" and 1/2" stainless tubing and it does a fantastic job. the finer pitch thread makes turning the knob easier (and there is a spare blade in the knob!). unlike the other Rigid and Swagelok cutters my coworkers use, this one does not rest the cutting blade on the bearings when fully closed. It's wider than any other cutter I've seen so clearances could be an issue near ends of tube or fittings, but the tradeoff of getting smooth rotations and less chance of corkscrewing cuts is worth it.The only cons I can think of is that the replacement blades are kind of expensive. But the blades are nice, designed for cutting stainless, and are wider diameter than others i've seen. Makes for smooth, easy cuts. I love it!
Sakthi
June 8, 2025
Looks like a lot easier to cut
Muito bom recomendo
June 7, 2025
Muito bom ðŸ‘
N. Vollrath
June 4, 2025
I’ve used the $10 tubing cutters from HFT and A-zone for years, and I thought that’s just how tubing cutters were. When my last one wore out I thought I’d have a look on Amazon to see what others liked, and this topped the reviews. Still took me three months of dilly-dallying to convince myself to spend $45 for a unit I felt should be $10, but gave in and ordered one because I have a ton of metal conduit and tubing to cut. WOW!! This thing is the Rolls Royce of cutters! The Bentley! First of all, it’s huge. It probably weighs a full pound, has multiple rollers with bearings, cutting wheel with bearing, and it’s so well made that the slide never binds and the power screw never jams. It’s like silk. It cuts through 1†EMT like butter, never a hiccup or jump or squeal. It doesn’t wander off track, it doesn’t jam, and it’s very forgiving even if you accidentally over-tighten the cutter a bit. So far I’ve probably made two dozen cuts (?) and it’s actually a pleasure to use it…I’ve been using it instead of a jigsaw or sawzall even for cuts I could do with the saw just because I like using it.I believe this is a tool that will last a lifetime. We’ll see how long I live and how long it lasts, but I’m super happy. Absolutely would buy this over and over if I had to.
Jessie
May 31, 2025
Gotta say, I didn't know much about this company and their products being someone who had a smaller cheap one that wasn't really all too great. Saw how many people here held this in high regard and decided to pull the trigger for a project needing 5/16" tune cut.First use with this was eye opening. The cutting, feel, and just overall build quality was top notch! Cut through a stainless steel tube like butter then proceeded to keep doing that on repeat for a few more cuts.The large knob was comfortable to use and turns like silk making it just the most effortless tool for this job.Only thing I can ding it on is the clam shell packaging with no easy opening but nothing a good sharp box cutter can't fix.If you're on the fence, I'm saying take the plunge. It'll definitely be worth it!
Andy
May 28, 2025
I was a bit skeptical of whether this would really work or not, but I was very pleasantly surprised. I needed to make a handful of cuts in some stainless tube, and it worked great. The key was just tightening a little each time. I was amazed at how easy it was, and the cuts came out very clean without any need to file the ends.
Jay
April 21, 2025
I installed a high pressure misting system with 3/8†stainless tubing. I first tried cutting this with a standard copper tubing cutter and while it worked it was a lot of work. Once I switched to using this cutter it was easy peezy and I was able to cut through the tubing so much faster and cleaner. It was well worth the money to pay a bit more for this cutter in order to make the job go smoother. There were many frustrating parts to this project but every time I need to cut the tubing it was the one part that just worked and I never regretted spending the money on this tool.
Gadgeteer
April 20, 2025
Having a center bearing applying pressure on the opposite side of the cutting wheel makes a very easy and nice cut! The extra bearing also help to make the tube very stable while cutting. I’ve had a few other Rigid tubing cutters; but this one is my favorite so far.
Daniel Patterson
April 10, 2025
Bought this because I couldn't find my old tubing cutter. Naturally after I got this I found the old one. But this one works better. Makes a clean cut very easily, no tendency of the cut to spiral down the tube.
All came the way as described
April 3, 2025
The product was great exactly what I was looking for price was reasonable and worth it I had a wedlock cutter didn't cut as smooth as the rigid one
Barber Technologies
March 22, 2025
I cut 6'x1" stainless steel tubes into 2' sections in less than 5 minutes. This thing is a beast! I canceled my order for a ferrous metal saw blade and do not regret it. It tracks true. If you cut conduit/pipe, you know what solid tracking means. Quick, accurate, handy size, and easy to use. What more could you ask?
Anatolio Velasco
March 5, 2025
Excelente herramienta, cumple con las especificaciones y trabajos descritos por el vendedor. Se ve bastante robusto para mà es sinónimo de Batalla.
Craig Ryder
February 21, 2025
Makes cutting stainless tubing easy!
Jangus Rangus
February 7, 2025
This is a nice cutter! I use it to cut 3/8" and 1/2" stainless tubing and it does a fantastic job. the finer pitch thread makes turning the knob easier (and there is a spare blade in the knob!). unlike the other Rigid and Swagelok cutters my coworkers use, this one does not rest the cutting blade on the bearings when fully closed. It's wider than any other cutter I've seen so clearances could be an issue near ends of tube or fittings, but the tradeoff of getting smooth rotations and less chance of corkscrewing cuts is worth it.The only cons I can think of is that the replacement blades are kind of expensive. But the blades are nice, designed for cutting stainless, and are wider diameter than others i've seen. Makes for smooth, easy cuts. I love it!
Sakthi
February 2, 2025
Looks like a lot easier to cut
Muito bom recomendo
December 27, 2024
Muito bom ðŸ‘
Recommended Products
$31.66
$ 13 .99 $13.99
$13.75
$ 6 .99 $6.99