Description of SS10P:

The SS10P is an all in one solution to give you great sounding bass in your vehicle without taking up a lot of space. This sub enclosure is only 3" thick so that it can easily fit under your seat. The amplifier is built in, so installation and wiring is clean and simple. This is a true all in one subwoofer solution with the subwoofer built into the enclosure along with a top of the line amplifier built in as well.

We added high level inputs so you can install this with an aftermarket or factory system. The high level input allows you to install this even if you have no preamp outputs available.

The smart turn-on circuit will sense that an audio signal is present and turn on the amplifier. When you turn off your music signal the amplifier built into this subwoofer system will automatically turn itself off. Something else we did to make installation quick and easy is we put all the inputs and outputs on one side. This makes wiring neater and easier. Our competitor's models are more challenging to install.

The SS10P has 800 watts of peak power and 200 watts RMS. This has great controls so you can adjust the sound to your liking. It has a level control for the volume, low pass crossover filter, phase control, input sensitivity, and bass boost.

Included is a metal remote bass knob and mounting hardware so you can control the sub volume quickly from your dash. The sound quality of this model is really great. Rockville has been the leader in under-seat subwoofers for years so you can feel confident that this is the best in its class.

Features of SS10P:

• Rockville SS10P 10" 800w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub
• Amplifier built in
• Enclosure is made out of cast aluminum which stays cool even under the seat of your car or truck
• Metal Bass Remote Included
• Gain, bass boost, and crossover controls
• Peak Power Handling: 800 Watts, RMS Power Handling: 200 Watts
• Heavy Duty Mounting Feet
• PWM MOSFET Power Supply
• Low Level RCA Input
• High Level Inputs with Auto Turn-On Technology
• Adjustable Input Sensitivity, Soft Delayed Remote Turn-On
• Thermal Protection Circuit, Short Protection Circuit, Overload Protection Circuit
• Green Power/Red Protect LED
• Phase Switch: 0° or 180°
• Low Pass Filter: 50Hz - 180Hz
• Bass Boost: 0 - 12dB @ 45Hz, Built in Subsonic Filter @ 20Hz
• THD: < 0.4%, Fuse Rating: Single 20A

Description of RWK81:

The Rockville RWK81 8 AWG (American Wire Gauge) amp kit has the following diferences over other amp kits on the market at this cost point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables.

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this cost point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this cost point. Other brands in the market place write 8 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this cost point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

One other last thing worth noting about our kit compared to others. Our kit cosmetically looks the best. It has blue power wire, clear ground wire, and twisted pair RCAs with matching colors. This model includes (1) sets of RCA cables.

Features of RWK81:

• Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit
• (1) 17' High Grade Twisted Pair of 100% Copper RCA Cable
• 17' 8 Gauge Translucent Blue Super Flex Power Cables
• 17' 18 Gauge Blue Remote Cable
• 17' 16 Gauge Clear Speaker Wire
• 3' 8 Gauge Super Flex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 60 Amp AGU Gold Plated Fuse
• 7' Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
• Soft abrasion proof insulating jacket allows for 100% improved flexibility
• PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F