Your cart is empty.
Your cart is empty.Product Description
The JawStand XP from Rockwell is your little helper with the strong grip. You don’t need to call down a family member or ask someone else on the job site to help you hold a heavy project in place while you fasten it. The JawStand XP raises 25”-43”, and then allows for 2 extra inches of fine adjustments so you can line up screw holes or just put the project right where it needs to be. (XP stands for eXact Positioning.) It holds up to 220 lbs, and it won’t get tired or complain about how heavy the load is. It has a max clamping width of 1-3/4”. And it’s compact, easy to store, and only weighs 15 lbs, so you can throw it in the trunk and take it everywhere. There are so many uses for the JawStand: strap in a standard door; it’s the ultimate tool for working on bicycles (just flip them over and clamp in the top tube and have access to everything at the height you need); load up a 2x4 and use it to hold crown molding in place. The JawStand doesn’t use rollers like other support stands, which can misdirect the project—The low friction surface provides a smooth release when you’re ready to place the project. Whether you’re a serious DIY-er, a professional woodworker, or a handyman, the JawStand is the perfect partner for one-person jobs that require a second pair of hands.
Amazon.com
The JawStand XP serves as a second pair of hands for DIY and professional projects alike (). Hold, support, clamp, or lift materials with ease ().
Rockwell’s RK9034 JawStand XP serves as a portable work support system with exact positioning—acting as a second pair of hands for common one-person projects like hanging a door, installing crown molding, supporting cabinetry, and more. From DIYers to professionals alike, the JawStand XP improves upon the performance of traditional roller stands to help you get the job done cleanly and efficiently.
The JawStand XP’s compact, low-profile design—complete with an extra-wide folding tripod leg stand and column height adjustment capabilities (from 29 to 43 inches)—make it easy to stow away in your workshop, garage, or on the job site without taking up important storage space. But that doesn’t mean it compromises on maximum load capacity: Even though the JawStand XP only weights 13.5 pounds, it can hold up to 220 pounds.
Material Support
The XP stands for exact positioning, and the RK9034’s low-friction slides are ideal for infeed and outfeed material support for power tools like saws and planers. While ordinary stands have rollers that tend to misdirect the material, such as a piece of lumber, the JawStand XP’s slides smoothly direct it along your intended path.
Assembly and Mounting
Heavy items like cabinetry are easily supported for assembly or mounting with help from the JawStand XP. With a head that rotates 90 degrees and an adjustable bevel with scale, you can manage exact positioning even under load. Micro-height adjustment raises and lowers work up to 2 inches for accurate placement.
Clamping
Its swiveling and tilting head with integrated clamp assists make the JawStand XP handy for innumerable assembly and construction applications. Able to securely hold items up to 1-3/4 inches wide, the cam-action clamp quickly sets and releases to allow you to clamp materials of the same size without needing to adjust the clamp width every time.
What's in the Box
One Rockwell RK9034 JawStand XP work support stand.
Highlights
- Provides portable work support with precise positioning
- Ideal for supporting cabinets, molding, doors, and similar materials for installation
- Integrated clamp firmly holds materials up to 1-3/4 inches wide
- Has no-mar, no-slip feet that do not damage surfaces
- Backed by a five-year limited warranty
S. Aschoff
2025-09-04 14:09:16
I feel like the demonstration pictures are a little misleading. Without mounting this thing to something, it is very wobbly. And clamping is very misrepresented, in my opinion. I mean it struggled holding a little piece of mdf. Maybe mdf is just too slippery. It definitely held a piece of 2x4 better. I guess I just thought this thing would be more flexible and useful. It actually has limited use cases. It's clamping area will definitely hold a door like they show, but it won't hold anything less than 3/4" without improvisation. It was probably mentioned in the description so shame on me if it was. Seems like, to make this thing really useful, you need two of them. I am not thinking it is priced incorrectly, I mean it is sturdy and clearly built with quality, but the clamping mechanism is just limited and only has 3 litlle pads. And the pads are hard plastic and not that grippy nor soft - could definitely see how it might mar your wood. Anyway, this thing has limited uses, but I am still going to keep it as with little tweaks, I can see still finding a way to making it more helpful. I am going to save up for the jawhorse. That looks to be way more useful and folds up to be just about as small as the jaw stand. I will do that instead of getting a second jaw stand. I'm sure others will find a better way to use this, or maybe have something to bolt it to. I just thought it would be more versatile for the tiny projects I'm working on and it just didn't meet muster for me.Update:The problem with my perceived value was my point of view. While I bought this with a pre-conceived notion of how I might use it in woodworking and not thinking of real use cases this was intended for, I now see this little stand has many uses. May require a little creativity, I've already thought of things where this stand will be incredibly useful to me in my small shop!
Al A.
2025-07-09 16:48:35
Wow, why didn't I own this years ago!I do a lot of remodeling here at home and just finished an upstairs bathroom from the ceiling down to a new floor and everywhere in-between.I had some large shelving to handle in my garage storage area and finally decided to get this Rockwell XP.Amazing non-slip grp for even very heavy large sheets of plywood. I put in thin sheets of luan on either side of the jaw to avoid and damage to the new shelving surface. (but, I have found that once you learn how to adjust the tension just right, this unit will grip strong without damaging your work piece.The Rockwell XP is very sturdy and solid and maintains a very stable and secure stance once set up. I used it pn our uneven paved driveway and found the legs will accommodate a little out-of-level footing and you can rotate the unit and typically find a position it will sit flat and not wobble at all.I am kicking myself for not having this when I put in a new kitchen and wall cabinets....It would have made the job so much easier.With its many adjustable positions for height and angle of the top clamp assembly, it is going to be so well suited for future jobs here!I plan to order another one as well. It has the ability to be used for a raised platform and would work well for painting above reachable heights.Given the wide stance of its legs and its rating for weight, there's probably many other uses I will come up with in time as I use ot more.5 Stars, extremely satisfied with this Rockwell!
Mark Brandon Long
2025-06-01 18:24:36
I love these stands and so does my back. It's really nice to have a very stable work stand that is highly adjustable to a comfortable height for working and for accommodating different materials. They fold and store surprisingly well. I refuse to go back to sawhorses. These are just so versatile.
Count Orloff
2025-05-15 12:30:08
For many years I've been using a light basic tripod support that I cobbled together, almost on a daily basis in my art metal and wood shop. I finally decided it was worth upgrading to something more sturdy and with better features. What I really need is a simple horizontal platform to hold my work up, so I don't really use the clamping feature that much. I just screwed a piece of plywood to a 2x4 that I clamp in the work clamp and use that as a tiny little table top.It's kind of overkill for what my needs are, but that also means that it's more useful in other situations. It's quite a bit heavier, and the tripod feet are wider, than the thing I was using before and that makes it a little more difficult to move around quickly which I need to do. On the other hand because it's so heavy duty it doesn't tip over as easily, and can hold things like doors windows panels etc so it's more like akin to a sawhorse.The fine height adjustment with the rotating handle is pretty cool. Big improvement over what I had before.
Noah Ehlinger
2025-05-07 15:28:40
VERY sturdy, easy setup and breakdown, very quality tool that seems will last a very very long time with continuous usage, as should be expected from a construction tool. I spend a lot of money on quality brand tools since they are the lifeline of my livelihood. I work in construction and need tools that can take a beating and hold up to the strenuous jobs they are used for. This Jaw horse stand does exaclty that, with many versatile uses, and definitely makes my one man jobs much easier. I actually bought 2 and use them in replace of standard saw horses. Fully adjustable, so alot of time i use only 1, but nice having 2 when applicable. I use them for various means like, extra support when cutting large lumber or moulding on my table and miter saw. Saw horses as mentioned. Extra support to hold lumber in place when i need another hand to hold one end, while I secure the opposing end. Being able to fully adjust height and angles of my support boards makes doing projects with one person so much easier.
paul turenne
2025-05-04 20:37:03
After reading reviews from various sources ,I decided to purchase the JawStand when I saw it for sale on Amazon.ca.The stand is very well built and the adjustments are very secure and useful.Due to the tripod design and footprint of the stand ,once the legs are folded out, it is very stable.The head also adjusts to a full 90° and has a gauge on the side that reads the degrees ,as well as a level bubble built into the plastic siderail covers.The clamp is also very secure ,which is achieved using a cam clamp...very nice feature !This tool has many uses around the shop and house ,limited to your imagination.PT
Guillem Reig Rico
2025-04-23 16:29:20
Complemento de soporte, permite efectuar trabajos en los que sin él, se necesitaban dos personas. Por su diseño, acabado y utilidad, tiene un precio adecuado. Muy recomendable.
Zeus
2025-04-22 10:09:06
Excelente herramienta, muy útil para diversos tipos de trabajo. Se puede improvisar como banco de trabajo, soporte para todo tipo de muebles, soporte para cuando está cortando madera en lienzos grandes. Es de muy buena calidad, resistente y fácil de transportar.
lucas spalla
2025-04-07 18:21:09
Edit 1: one thing that i would do it to improve the Product is to use more metal parts instead of hard plastic parts, nothing broke yet but i personally dont like to have plastic adjusters, it feels like it will break if you apply a bit more pressure hahaJUST BUY ITAt first I thought it was a lot of money (specially bc I bought 2), I wish it was a bit cheaper but oh well, it’s still an awesome product thoIf you are a handyman just get itIt’s extremely handyI use for painting specially bc you can adjust the height and work EXTREMELY CONFORTABLE, but I already hang doors with it, used for cutting extremely long boards in the end of my mitre saw etcand I also use for hanging stuff so I don’t have tools thrown around my work area and I don’t need to bend down to pick it up as well
Almonte
2025-01-19 16:11:06
El soporte es muy útil, para tareas profesionales funciona bien, en un uso medio, no muy pesado.
Recommended Products
