Your cart is empty.
Your cart is empty.Rod End Directs ECF6 rod end is a high-quality economy rod end with a 3/8’’ bore and 3/8-24 internal right-hand threads. This rod end also comes complete with the jam nut, so you don’t have to purchase one separately. Both the rod and the jam nut both require a 9/16 wrench to tighten and loosen. THIS PRODUCT IS LISTED AS "NUMBER OF ITEMS 2" BECAUSE EACH PACKAGE CONTAINS 1 ROD END
JC
2025-08-21 15:26:50
Ordered these for a go cart and they are a nice upgrade from the stamped junk! Definitely worth it!
Customer
2025-06-28 11:58:21
Used for a clutch linkage end due to the factory ones always wearing out, was half the price that I could find in town. So far I’m going on 3 months or so and haven’t had any issues!
S.K.H
2025-05-13 19:11:33
I needed this for a light application and it works perfect, is well made, and has “no play†in the ball socket making it work well for what I wanted to use it for.
Honest John
2025-04-19 17:12:28
I use this on a classic car Master cylinder connection. The quality is excellent.
nagsheadlocal
2025-03-14 11:58:20
If you have an older tractor or vehicle with those "dogleg" rod ends (the screw on a ball joint that's pressed into the rod) throw those away. Buy a length of 3/8 rod stock, cut to length, cut threads on the end, and fit these. Remember you will need a spacer underneath.
Brian in Pa
2025-02-05 18:26:59
I used this for a mechanical throttle linkage support on my Factory Five Cobra. Works great
kartracer
2025-01-22 16:48:44
Had to make new shift linkage and these connectors fit perfectly on 3/8 x 24 threaded rod.
Robert W.
2024-12-07 11:12:55
just what i was looking for made a handicap hand brake for my truck
Recommended Products
