Your cart is empty.
Your cart is empty.Sway-bar quick disconnects give your Jeep better articulation off road with the pull of a pin, but allows you to keep on road handling and stability. Our new links fold up and secure out of the way when not in use.
Joe Roeder
2025-08-25 18:50:57
I discovered an excellent way to drive out the old sway bar link studs on your jeep. Chances are you have a U joint pusher tool and if you dont then make sure you get one. Basically this tool is a big C clamp with a hole in the end which nicely allows you to crank large amounts of energy on that stubborn stud and allow it to pop out the end.If you try to hammer those studs, even with heat, chances are you will bend or break the mount to the axle.Review:So these sway bar links seems great. They are adjustable for height and tension which is awesome and they seem to come with some extra hardware. Pretty darn easy to install too. If you follow the tip I wrote above you will have no problems whatsoever. I did not experience any of the QC issues other reviewers did, though that doesn't mean they are wrong. I also used lock tite on all threads so I could worry a little less about anything coming loose. All the hardware seemed strong enough to handle the task but time will tell. I will update this review with any changes and maybe some pictures (once the weather is a little more cooperative)
6 stars all the way ^_^
2025-08-14 15:22:28
Beware: When these say 3.5-6.5 inch lifts, they mean it.Yes it will fit a 3 inch lift. As that is what I have done. But they will bottom out into your fender resulting in a large dent and eventually a hole. "Ask me how I know" The only reason I have them on with my 3 inch lift now is I already have coil spacers to pair with my rough country lift and new rear leafs to be a total of 4 inches.Other than that these are amazingly easy to install. I would recommend referencing the directions as I watched an online video that misguided me leaving me puzzled. But they seem to be very well built and they will help make my trail going experience much more fun in the feature.Again I recommend these and am loving how they work.UPDATE: They fit and work perfectly with my now 4.5 inch front lift. Highly recommended piece of hardware. And they make front axel and suspension work a breeze!Quick tip: File the ends of the pins to a short point. Makes inserting the pins much easier.
Callie Luck
2025-08-10 21:56:00
Good quality
Customer
2025-07-28 12:59:41
A pain to get the old link studs out unless you have an air hammer. The quality of the nuts and bolts is pretty terrible! One side of a nut is 5/8's the other is a 15! The end of the bolts it came with aren't clean and will strip easy. The tie rod end pieces are drilled/threaded crooked(shown in photo). Other than the poor china craftsmanship, they seem to work good. I would recommend buying your own nuts bolts. Chinesum doesn't hold up well on trails.
Edwin B.
2025-07-04 17:25:33
Easy to install, makes a world of difference when off roading. Allows for more articulation and smoother ride when on trails
Kaelee Smith
2025-06-12 14:46:13
Absolute garbage and terrible quality. Install was easy, but they didn't even last 6 months before they were ruined. Don't waste your money.
Tyler
2025-06-02 16:30:08
GOOD FOR SUSPENSION TRAVEL BROTHER
MattAZ
2025-05-28 17:33:02
To make sure it was done correctly, I had a mechanic install. I know the mechanic who has the same set up on his Jeep Cherokee XJ. Was done in about an hour. Looks great! Will be using it on the Arizona trails.
Rodrigo
2025-04-22 18:59:16
buena calidad y se ven bien, de muy facil desconexion
Austin shillito123
2025-04-14 13:34:37
Good quality, and easy install 🤘
Kaileigh
2025-03-24 17:27:02
These are well made and easy to assemble/install. Unfortunately they really are only for a xj with 4 inchs or higher. 3 or 3.5 isn't gonna fit right. I had to return, not the right fit, return went flawlessly.
HERGAR
2024-12-26 20:32:01
JUSTO LO QUE NECESITABA HASTA AHORITA TODO BIEN JEEP XJ 98
kwasy
2024-12-03 17:16:30
Work good, easy to install took maybe 10 min. Rubbers on bottom link can come out easily.
Recommended Products