Your cart is empty.
Your cart is empty.Product Description
- Three colors available
- Package including: 1 X Rubber Stamp Sheet
- Size: 29.7 x 21 cm/ 11.69 x 8.27 inches
- Material: rubber
Rubber Stamp Sheet
Made of high quality, it is easy to use and can keep for a long time.
Enough area to DIY any shapes of stamps.
Can be cut by scissor or laser engraving machine. Convenient for commercial and personal use
Waterproof, no leakage
Clearly seal
Easy to engrave many patterns
Can DIY a unique stamp as you like
Eranikus
2025-07-14 11:20:57
I had been looking into having a custom stamp made but prices were too high for my budget.Came across this material that another laser owner was using and making videos with so I decided to give it a try.This is THE product you want if you own an F1 and want to make your own rubber stamps!There was a bit of trial and error to dial in proper settings but once that was done, it works perfectly!My photo may look scary with the flame but it is merely a flash of flame while the little bits getting engraved burn off. There was no actual fire or melting with this product.I did not understand the clear message on product bag stating "This is a set, do not separate" unless I got shorted something in my order.I received one sheet of rubber stamp material.Love this product, will buy more as my need for custom made stamps increases!(Remember to mirror your text while designing your stamp!)
Donna W.
2025-05-08 10:05:24
Engraved perfectly and flawlessly.
Brittney
2025-03-22 11:35:31
Good thick rubber. Very Saturday for stamps that have intricate designs. Worked well in my Co2 laser. Creates a lot of dust. I use a small vaccume to clean up before touching after engrave. Alcholo cleaned up nicely.
Heath
2025-02-28 16:56:28
Stamp cam out perfect, just use a vaccum to clean up its messy
Rogue Roots Project
2025-02-24 16:16:02
It’s probably me and my skills but it took 4 tries to get our glowforge to cut this properly. The material is good and thick. I probably need some info.
Rev. Jeremy Kush
2025-02-14 10:56:16
This rubber pad makes great stamps! I used a 60w co2 laser at 200mm/sec at 90% power and crosshatched 2 times (4 total passes), to get it to where it needed to be.I recommend this pad to anyone that wants to make rubber stamps.Make sure to have proper ventilation as it is smelly and makes a good amount of super fine dust.
Earl
2025-02-11 15:42:38
Used with laser engraver to make a rubber stamp and it worked well.
Mrs. A.
2025-02-07 20:43:37
I used these to make Christmas Around the World magnets to stamp their little passports when they went from classroom to classroom. So easy to cut with my laser !
Recommended Products