Your cart is empty.
Your cart is empty.Zombie Runner
2025-09-05 12:09:33
Worked great on my kayak Newport trolling motor 55lb
A.J. Gordon
2025-08-08 18:37:45
This attachment works great. It made a huge difference in the performance response. Definitely worth the buy.
Art Wise
2025-07-31 11:22:25
Likes- Stepless feature is great a provided a smooth transition in speeds. All trolling motors should be made this way. Very light weight. Short shaft works very good on transom mounted Jonny Boat Bass 100.Dislikes- the distance between forward and reverse is too close and sometimes hard to get in the stopped position. The mount appears to be a little light for a 90lb thrust motor. The mount is smaller than on my 30lb Minn Kota, but has not caused any problems yet. The motor is a little noisier than my Minn Kotas or Newports, but that has helped me know when the motor is not in the stopped position. No significant speed difference over my 62lb thrust Newport and this 90lb, and no noticed increase between the 7 and 9 settings on the motor. However overall it has performed well and would buy again if it continues to perform well and has longevity.
Christopher Goodman
2025-06-28 13:07:49
The clamps do not even come close to fitting over the shaft, no way you’re packing rubber in between the two either. This is made for 1980’s trolling motors with really small diameter shafts. I’d bet any guy who went out and bought longer bolts to make this work- has yet to realize how off center the fin is to the actual shaft. This is a trash product if you have a newer trolling motor. I will be returning this.
Dan
2025-06-27 14:57:28
A house I rented on holiday had a 15’ canoe; someone made a trolling motor mount using 2â€x4â€s at one end of the canoe. I didn’t want to have to keep reaching behind me to work my trolling motor that I brought with me and attached to the canoe, so I got a plastic lawn chair, cut the legs to make it more stable, and sat facing the motor. This setup, essentially, put me at the front of the canoe which meant the “back end†would fishtail or swing freely any time I turned. I attached this rudder to a piece of metal, electrical conduit (no flex like pvc) and the canoe tracked straight after that! It withstood numerous beachings without cracking or breaking. I am glad I bought it and highly recommend it.
Carlos L
2025-06-20 18:11:17
The material appears sufficiently rigid. However, the rubber gaskets that come with it are too long to wrap around the tube; they need to be placed vertically, and only one can be used because the screws it comes with, are too short to fit both, one on each side. And if it's installed without these gaskets, it doesn't hold securely enough to control the motor. In summary, it needs longer screws, at least 3 mm longer, and shorter seals. Other than that, everything is fine."
Brandon
2025-05-27 20:12:40
For great on my MinnKota electric motor and was an easy install. Took it out and tested it this weekend and I definitely could feel a difference even without the motor running and drifting a-crossed the lake I could feel and see the difference with steering. 10/10 definitely recommend.
Joe Hill
2025-05-21 14:19:02
Good product. Be cautious when tightening clamp screws.
boomer 23
2025-05-01 10:28:46
Great for DIY vaquita epropulsion motor to kayak.
chequito
2025-03-28 19:43:36
El producto lleno todas las espectativas de mi lancha le quedo genial
kenneth J Carey
2025-03-25 13:19:54
meets requirements but not of the highest quality
Brian
2025-02-19 09:14:30
One problem with an electric trolling motor is keeping the boat straight especially when it’s windy.I installed the rudder prior to my last fishing trip.I was blown away not only did it keep the boat straight the amount of movement was very minor, it reduced the overall power consumption.Just an awesome device.
James Sawada
2025-01-12 10:49:36
Helps steer and track
Recommended Products
