Your cart is empty.
Your cart is empty.Protect those expensive headlights, turn signals and parking lights from impact with the Rugged Ridge Euro Light Guards. Each Euro Light Guard is easy to install with no drilling required. Made of polished stainless steel for a true attention to detail.
Jose
2025-09-03 19:05:08
With a coupon I paid about $16.00 for these. Well worth it! I have a 2018 2 dr JK and these were incredibly easy to put on. I read reviews where it was a nightmare but all I had to do was remove one rivet from my fender flare and I slipped it around the side marker light. Literally took 2 mins. Just pop the center of the rivet with Philips head and out it comes. They look really cool too. I will say Rugged Ridge took about two weeks to send these out which is ridiculous nowadays but glad to have them on my rig.
STLJeep
2025-08-31 15:01:18
The guards really are built well. They are sturdy, coated well, and come with an O-Ring to keep out water. Yes, installation is somewhat a pain, but once you get past 1 screw on the driver side fog light, the rest is a breeze. With my JK, I DO NOT have the silver bumper addition. That being said, the fog lights fit perfectly fine. From reading other reviews, these guards will fit, only if you do not have the silver bumper like the Sahara's do. I have guards on the headlights and signal lights, and they are holding up just fine in heat over 100 degrees and cold under 10 degrees. Spending 30 minutes to install the fog light guards is definitely worth it. Rugged Ridge shipped them in under 2 days and provided detailed instructions the explained how to remove the fog lights.
James2929
2025-08-18 18:40:54
This item looks great once installed. Only issue I had; Very difficult to install on my 2011 Jeep Wrangler. I would recommend this to any Jeep owner.
Blisterphish
2025-07-01 10:17:47
These are a complete pain in the butt to install. Unlike other brands these guards sandwich between the light and the plastic of the bumper. In order to install them, removal of the driving lights is required. After much time and frustration the lamps were removed only to find they didn't fit back into the bumper properly with these guards in place.These guards, like every guard of this style, look cool but other manufacturers provide alternate installation methods that are so much easier and end up actually working. I purchased a different brand and had them installed in minutes.
Steven W.
2025-06-10 18:43:31
Bought these to supplement the Rugged Ridge headlight, marker light and tail light Euro Guards for my Jeep JK. I love the look these guards give it. A rugged off-road look that looks sharp on the streets as well. Easy to install, but fit just a little too tight on the fog light assembly, so some minor bending was required to make it work. No overall adverse affect on the look or perfromance.
R. Dzwonkowski
2025-06-01 20:53:33
I love this.I have 2012 Jeep Wrangler and installation took me 10 min.6 min I spend to find out how much power to use to push those plastic centers.I did not want to break it. And You need really GOOD push to pop out.Remove this .Push plastic aside and simply slide guard from the bottom.And looks really hot.And I don't understand others problems.I guess ,they always drive on the left line.
Pete
2025-05-29 12:43:58
Good product. Didn't come with instructions. Couldnt find a "how-to" vid online. Turn signal lens must be removed in order to install.
Zed
2025-04-26 12:51:42
Nice product. Well built. Installation is a bit of a pain on a 2012 JKU but get someone to help you pull the fender back and you'll be O.K. Also, on the plastic push pin on the fender, pull the center all of the way out and the base will pop right out.
Edward Wood
2025-03-10 11:20:07
LOOKS GREAT EASY INSTALL
slave2theman
2025-01-13 12:13:33
These look good on my 2013 Wrangler. They are solid and the fit well. My only issue was putting them in which is not the fault of the guards themselves. It would have been a lot easier if I would have taken the bumper right off so that I could see and hold in place the fog light mount screws.
Scott MacDonald
2025-01-07 13:37:59
Super fast and easy to install and look great.
Brad Jones
2025-01-04 18:43:44
Unfortunately did not fit as advertised for my 2015 Jeep Wrangler fog lights. They couldn’t even fit in the holes in the bumper. I had to return them. Disappointing.
G. Allan Howard
2024-12-16 14:48:44
Excellent price. Well packaged. Quick shipping. Exactly as described. Many thanks.
Recommended Products
$132.46
$ 63 .99 $63.99
$24.99
$ 11 .99 $11.99
$24.99
$ 10 .99 $10.99