Your cart is empty.
Your cart is empty.Product Description
- Motorcycle Alarm System Wireless ；
- Motorcycle Anti-Theft Alarm Security System ；
- Remote Control Horn Car Alarm for Motorcycle Electric Bike Scooter Golf Cart Tricycle Truck ATV UTV；
- Red Line:“+” Positive vehicle battery, or a positive line on the vehicle;
- Black Line:“-” Negative vehicle battery, or vehicle on the negative line;
- Blue Line: Signal line (No installation);
Search Function
- Alarm make sounds when you press the ringtone key, easily to find your vehicle.Press the search button, the alarm horn will beep for about 15 seconds to inform the locomotive location, press any button to stop.
- Note:
- This kind of wiring way is generally suitable for the motorcycle with AC ignition. The different motorcycle has different ignition mode and the wiring way is possibly different. Please install the alarm system by an authorized professional alarm installer in your local motorcycle repair shop if you are not familiar with motorcycle wire installation.
Specifications:
- Working voltage: 9-16V DC
- Remote battery: button battery
- Static current: <5mA
- Working current: <400mA
- Deibel alarm decibel: 105-125dB
- Wiring Diagram:
- Red Line: “+” Positive vehicle battery, or a positive line on the vehicle
- Black Line: “-” Negative vehicle battery, or vehicle on the negative line
Alarm with Remote
- Five-speed adjustable sensitivity to meet different needs for vibration alarms.
- Press "Vehicle Finder"key 2.5 seconds, then the speaker will "Bi""BiBi""BiBiBi""BiBiBiBi""BiBiBiBiBi "cycle tweet, the highest number of horn sound,anti-theft highestsensitivity. press "Vehicle Finder"key to confirm.
Package:
- 1* Anti-theft device
- 2* Remote Control
- 1* Wire
- 1* Manual
- 1* Double-sided Adhesive Tape
Button introduction：
- Turn off the anti-theft function:
Press the remote control unlock button, the system will turn off the anti-theft mode after two short tones of "DI-DI", and then you can start the motorcycle.
- Turn on the anti-theft function:
Press the remote control lock button, the system will emit a short “DI” sound, and the anti-theft system will start after three seconds. In the alarm state, if someone tries to ignite, the siren starts to alarm, the indicator light starts to flash, and the engine cannot be started.
- Anti-robbing function:
When the motorcycle is robbed, the owner only needs to press the remote control lock button, the engine immediately stops working, the siren sounds, and the indicator light flashes.
- Keyless start:
Press the start button twice without the key, and the motorcycle will start.
- Keyless lock：
Press the button once then press button once the motorcycle will stop to the alarm state
- Locate the motorcycle:
Press the search button, the horn will sound intermittently for 5 seconds, and the direction light will flash to indicate the location of the motorcycle.
- Adjust vibration sensitivity:
Press the start button for 2 seconds, the horn will cycle BI, Bl-BI, BI-Bl-Bl, BI-BI-Bl-Bl, Bl-BI-BI-BI-Bl. The remote control can adjust the sensitivity of the sensors from 1 to 5, and set the level according to the number of siren sounds (level 1 has the lowest sensitivity, level 5 has the highest sensitivity, and the system defaults to 4 levels)
Cameron White
August 31, 2025
The media could not be loaded.
Diddy
July 4, 2025
I wanted to install a security system on my bike because it seemed like a cheap enough entry.I originally started with a stand alone battery operated unit (the most popular one on Amazon) and was dissatisfied due to the level of sensitivity the unit had when the motorcycle was disturbed. I ride a 2017 Yamaha FZ-09 for the record.This alarm ended up being only marginally better in that it draws power from the battery so there's no battery to remember to replace. The install itself was straight forward and involved connecting of positive and negative wires to the battery terminals.It would have been nice if the wires were not just bare wires and had some sort of connector. I ended up soldering some spade connectors in 22 gauge which made it nice and clean. Connection to the battery at that point was simple and the wires were easy to route.What I was not happy about with this kit again was the level of sensitivity. Someone would have to straight up SIT on my bike for the alarm to go off. I guess it would go off if it got tipped over too.At the end of the day I'm going to give it to you straight: This a cheap way to add "resale value" to the bike, and to look cool when it chirps when walking to or away from the bike.The alarm sound itself is annoying, the directions impossible to understand, the remote feels cheap, and the sensitivity settings are too difficult to follow thereby rendering the system with essentially one sensitivity.This product is worth the $25 to gain the cool factor and up the resale value (on paper) - but DO NOT expect anything beyond that. This is probably the best motorcycle alarm system you can get, and it's still borderline junk.
Fair Skeptic
June 2, 2025
Packaged well with adequate instructions. Easy to install. Decent range to fobs (depending on where you mount with regard to metal obstructions). The reaction to motion er vibration is finicky. We go the best results when we mounted securely to solid metal so that the vibrations would be better transferred to the unit. We mounted in a side by side (CanAm Maverick), which experiences a lot of bumps and jolts, notwithstanding the unit continues to function as when we first installed. Would purchase again.
KELLY
May 28, 2025
This little unit easy to install has two nice key fob switches very loud and only two wires to hook it up be cautious the first time that you hit the button on it this thing screams like very loud buy it and try it this is my third one all of my bikes have them on
Busy Buddy
February 1, 2025
This works great for my application, it does not have ignition disable but will draw attention. I used it on a scooter which is within earshot so it will sound if someone touches it. I set the sensitivity at mid-range as this alarm is very sensitive and did not require super high sensitivity. I did mount it with two screws in the holes provided instead of the double sided tape supplied. I also installed an inline fuse to protect other nearby wiring. Works great and worth the price.
Gliden Rivera
January 28, 2025
Put this product on my bike and I thought that the alarm quality was going to be nice but it was really lousy the loudness of it there was no loudness I can't even hear it security they could steal my motorcycle and I would never even notice it value for your money I don't think there was any value there at all I would not recommend this to anyone
Joseph Kulakowski
January 13, 2025
The media could not be loaded.
Mark K.
December 17, 2024
High quality. Loud. Easy to install.However, I could not get the sensitivity high enough to trigger the device once on my motorcycle making it unusable.Seller was excellent in their customer service as I had multiple exchanges regarding this issue.5 stars customer service. 3 stars alarm (only because it would not work for my cycle). = 4 total
Paullynn
November 29, 2024
It was so easy to install thank you very much
Recommended Products
$122.78
$ 49 .99 $49.99