Your cart is empty.
Your cart is empty.Product Description
- Package Includes: 8 Pack RV Water Tank Probe Sensors
- Collapsing pressure system virtually impenetrable seal if properly installed
- Water Tank Sensor Probes Constructed of stainless steel and combined with durable vulcanized rubber grommets and rust-resistant hardware, these button-head sensors are built to last in the harsh environment of your substrates while being continually exposed to gray, black, and potable water
Note:
- Manual measurement, error, for reference only, please carefully check before purchase
Made Up From Four Parts:
- Sensor post
- Vulcanized grommet
- Washer
- 3/8" nut (2)
Simple To Install:
- You start by marking where you need each of the probes; at the full level, half level, empty level, and ground
- Then take your 3/8" drill bit and drill in those locations
- Once your holes are drilled simply take your probes, button head side first, and slide it into the tank
- By tightening the nut on the end, it will create pressure on the grommet. This pressure causes the grommet to expand, creating an impenetrable seal
Griz44Mag
2025-07-03 15:36:34
Replacement of leaking OEM tank sensors in our 25 year old RV. They are easy to install and work better too!
Crawdad
2025-04-15 10:16:24
Seems to have worked ok. Not leaks yet. Easy to install. Delivery was late.
John Krueger
2025-03-21 13:37:16
Whent in the existing holes when old sensor was removed. Worked fine
Anthony Frueh
2025-03-10 16:32:49
Works perfect, easy to install.
Alan
2025-02-08 13:52:24
Easy drop in installation for replacing those sensors that seem to get items stuck on them often. After a thorough rinse of the black tank to remove as much residue as possible I took a few photos of the wiring to make sure the sensors wires were connected in the correct orientation for full, 2/3, 1/3, empty level indications.As most RVers know the probes that stick out far and get a connection with the water but flushed items may stick to the probe and give a false reading of 100% full all the time. Frustrating but these button probes should help solve this.Easy to install, connect and right now they're working better than the other sensors. Wear gloves and safety glasses because you are dealing with waste and it's easy to forget and wipe sweat off your forehead with a dirty hand.
Brian Allen
2024-11-29 09:00:00
Make sure that your tanks are empty before attempting this install. I did the installation after returning from a trip emptying both tanks and permitting them to dry long enough to not have any liquid residue remaining. The old sensors are fairly easy to remove and these seem to not have any leaks so far. My old ones weren't registering so it was time to replace them. These work properly now. Great product. Enjoy!
Recommended Products
$799.99
$ 99 .00 $99.00